TECKNET M006 Cordless Wireless Mouse User Manual

M006 Cordless Wireless Mouse
User Manual

Product Layout

Technical Specifications

Package Contents

1 x Cordless Mouse
1 x USB Nano Receiver
1 x User Manual
Note: Batteries NOT included

System Requirements

To use this mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below.
Hardware

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0 Operating System
• Windows XP, Vista, Win7, Win8, Win8.1, Win10

Note: The scroll wheel only works under the operating systems listed above. If you use the mouse under a different operating system, the mouse may either not work or lose  its enhanced features.

Inserting the Batteries
The optical mouse uses two AA batteries (not included).

1. Open the battery cover.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity markings.
3. Close the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the mouse. The Red LED of the power indicator at the top of the mouse will flash.

Note: Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.

30-Month Battery Life
The mouse consumes little power and offers a long battery life of up to 30 months without changing batteries. However please note that the actual battery life may vary based on user and computing conditions.

Receiver Connection
Take out the USB Nano receiver and plug it into a free USB port on your computer. The Plug &Play function of your system will detect that a new device has been connected and install it automatically.

Note: The receiver can be removed and stored in the battery compartment while not in use.

Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.

• When the USB Nano receiver is disconnected or the PC is switched off, the mouse will be switched off automatically for the purpose of power-saving.
• When your mouse is not operated for 10 seconds, it will automatically drop to the first level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 8 minutes, it will automatically drop to the second level of IPS. To wake the mouse, click any button.

DPI Switch
The mouse supports six levels of DPI: 800/1200/1600/2400/3200/4800DPI. The default DPI is 1200. Press the DPI button, DPI will raise to 1600, LED indicator will flash three times. Press the DPI button for  each time, the DPI will raise to the next level, and the DPI LED light will flash one more time.

Low Battery Power Indicator
The mouse is equipped with a low power indicator. When the battery power gets low during the period of use, the Indicator under the scroll wheel will flash. Please replace  the batteries. Note: We recommend you use AA alkaline dry cell batteries.

FAQ

1. What should I do if the mouse does not work?
   • Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the  battery housing.
   • Make sure the batteries are not discharged.
   • Please try to remove the batteries, and reinstall the batteries again.
   • Verify that your computer’s power management features are turned off.
   •Check the Nano receiver’s USB connector is firmly attached to the USB port of your computer.

2. The USB Nano receiver is recognized by Windows (2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10) but the cursor does not move?
   • Check whether the low power indicator on the top of the mouse lights up. If the sensor lights up, it is likely that the batteries are discharged. Please replace them.
   • If replacing the batteries does not help, it is likely that the mouse is not connected to the receiver. Please try reconnection and ensure that the mouse is within the optimal operational working distance (1.5m) from its USB Nano receiver.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.

1. SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless  they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from fire or explosion may occur.
6. For proper insertion, please observe polarity indicators ( +/-).
7. Remove the batteries if the product is not going to be used for a long period of time.
8. Do not place the product in or near any inflammable, explosive or hazardous object.
9. Do not place in or near water, rain, excess moisture or extreme heat.
10. Do not operate the product with damaged cord or plug.
11. Do not operate the product if it has been damaged in any way.
12. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
13. Do not throw or shake the product.
14. To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.

Limited 12-Month Warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects  in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unihan’s request at the sole expense of the purchaser, or  if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect  against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email [email protected]
for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions  and we reserve the right to make any changes without further notice to any products mentioned herein.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type M006 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

Correct Disposal of This Product

**** Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to  promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions other purchase contact. This product should not be mixed with other commercial wastes for disposal.

References

• sopra.se
• TECKNET EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>