PROSCAN PSP158 2 x 15 Inch Light Up Bluetooth Speaker FM Rad User Manual

PSP158 2 x 15 Inch Light Up Bluetooth Speaker FM Rad
User Manual 2 x 15″ LIGHT UP BLUETOOTH
SPEAKER-FM RADIO
Model No:PSP1580
USER MANUAL

PSP158 2 x 15 Inch Light Up Bluetooth Speaker FM Rad

PROSCAN™ IS A REGISTERED TRADEMARK OF TECHNICOLOR USA INC.
AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.
DEAR CUSTOMER
In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.
NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

PACKIN LIST

Upon opening the package, please check for the following items:
1 x Speaker
1 x Instruction manual
1 x remote

SPECIFICATION

Power: 100W
Frequency Response: 38Hz-20KHz
SNR:≥75dB
THD: ≤10%
DC input: 22V/4A
Woofer Unit: 15″x2
GGGGGG
1 x wired micphone
1 x adaptor
DO’S AND DON’TS
Do not play music at excessive levels as damage to hearing and / or equipment may result.
Do not use outdoors in wet or in damp surroundings.
Midrange Unit: 4″x2
FM: 87.5~108.0 MHz
Dimension: (WxHxD): 4651240370mm
Tweeter: 1″x 1

PRODUCT OVERVIEW

1. SD card input
2. USB Player
3. LED Display IR
4. Power switch
5. MIC TREBLE: Music treble adjust
6. DELAY: Microphone karaoke delay adjust
7. MIC BASS: Music bass adjust
8. MIC1: Microphone input
9. MIC.VOL:Microphone volume control
10. ECHO:Microphone karaoke echo adjust
11. TREBLE:Treble adjustment
12. BASS:Bass adjustment
13. MIC2: Microphone input
14. VOLUME Music volume adjust
15. INPUT/STANDBY: Short press for playing mode selection for Line in, FM Radio , Bluetooth, USB,and SD card. Press STANDBY button on the panel control for a few seconds,the device will enter into stanby state,the LED display will show off, press and hold it for 2 seconds to turn on again.
16. Voice changer
17. LED/MIC PRI: Short press LED/MIC PRI button to change the LED light effect and turn on off the LED light. Press and hold this button to turn on the priority microphone or turn off this feature.
18. EQ adjustment : enhance the adjustment of music to choose the effect you like
19. Previous song
20. Play/Pause&TWS&FM:(Wirless Bluetooth Connection: under bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker;Under FM mode, long press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
21. Next song

REAR PANEL

1. DC input
2. LINE input

REMOTE CONTROL

1.  Standby

2. Master volume +/-

3. Previous

4. LED button

5. EQ button
   Press EQ button on the remote to select EQ modes: Pop, Classical, Jazz and Rock.

6. Voice changer

7. Signal input button

8. Next

9. Play/ Pause

10. Mute button

11. MIC Priority

Instructions

1. Remote control should be available within 6 meters and 60 degree.
2. Remote control should be operated straight to the VFD Remote transducer area. No obstacle should be placed between the remote control and the unit.
3. Remote control might be unavailable under strong light, In this case, remote controller should be removed from the strong light.

OPERATING INSTRUCTIONS

1. playing
   Plug the power cord in, and adjust the main volume knob to proper place. Switch on, and adjust Treble and Bass in accordance with your preferences. You then are able to enjoy the wonderful & professional glamour brought by the product.

2. Karaoke performance
   Plug in the microphone, and then turn the knobs to adjust microphone volume and reverberation for optimizing the performance. You only need to install the microphone battery and switch on.

Note: after using, please turn down the volume first. Then switch off the power and pull out the power plug.
FM OPERATION
Short press Input button to switch to FM mode, longt press PLAY/PAUSE button to automatically scan radio station, by pressing PREVIOUS or NEXT you can select a previous or next radio station.
BLUETOOTH:
Short the INPUT button on the panel control to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other Bluetooth enabled audio device and select ” Pro PSP1580 “.
USB/SD MODE
Insert USB/SD card directly for playing.
LINE IN JACK

1. Connect an audio cable to the LINE IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman,etc,then select LINE by pressing the INPUT button on the control panel .
2. Play from an external audio device.

TWS: (True Wireless Speaker )

It needs two speakers to make TWS feature. When you had two speakers, you can make a TWS as below steps:

1. Don’t connect to this speaker with Bluetooth devices.
2. Turn on both speakers and press the mode button to change to Bluetooth mode.
3. Press and hold one speaker’s play/pause button for 3 seconds and wait for both speakers to connect each other. It will have a tone coming out from these speakers after connected successfully.
4. Turn the Bluetooth devices to search the Bluetooth name “Pro PSP1580” and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
5. Now you can play the music form your Bluetooth devices.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–  Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation.
To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.

90 DAY WARRANTY

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
For service assistance and product information, please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you contact the Support Team:

• Name, address and telephone number.
• Model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address and date of purchase.

References

• Curtis International - Affordable TVs, electronics and appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>