TOZO AcuFit GT Smartwatch User Manual

TOZO AcuFit GT Smartwatch User Manual

Introduction

Note
Before using the watch for the first time, ensure you charge it using the provided cable to activate and turn on the device.  You can customize the screen on time between 5 to 20 seconds by navigating to: Settings > Brightness › Screen-On Time.

1. Open the package and carefully inspect the contents.
2. Package Contents: TOZO AcuFit GT Smart Watch 1 (1 unit, with a built-in lithium battery), User Manual 1, Charging Cable * 1.
3. To begin using your watch, connect the magnetic charging cable to the contact points on the watch to charge, activate, and turn on the device.
4. Search for “TOZO Wear” in the app store or scan the provided QR code (located on the right) to download and install the app.
5. Pairing: Open the TOZO Wear app, tap the “More” icon located in the upper right corner, select “Add Device”, choose the device category that corresponds to your watch, and select your watch from the search list.
6. Alternatively, you can quickly link your device by scanning the QR code on your watch using the app’s scanning feature.

Device Connection

Adding Device by Search

1. Open the app, go to the “Device” page, and click “Add Device.”
2. Search and select the device’s MAC address.
3. Confirm pairing on the watch.
4. Confirm the pairing request on the phone.
5. Successfully connected.

Adding Device by Scanning

1. Open the app, go to the “Device” page, and click the scan icon.
2. Scan the device’s QR code.
3. Confirm pairing on the watch.
4. Confirm the pairing request on the phone.
5. Successfully connected.

Charging Instructions

1. Place the charger close to the charging point on the back of the watch. The watch and charger will automatically attach.
2. The charging interface will appear on the watch.
3. The watch will indicate 100% charge when complete.

Button Functions

Function Button

1. Press and hold for 3 seconds to power on/off the device.
2. Short press from the main watch face to access the menu list; short press in the menu interface to return to the main watch face.
3. Short press in the app interface to return to the main watch face.
4. Short press to wake up the screen when it’s off.
5. Short press during screen-on fitness mode to access pause/resume/lock screen/ volume options.

Sport Button

1. Short press to access the “Exercise” mode list, including outdoor running, indoor running, outdoor walking, outdoor cycling, and more.
2. Short press again in the exercise list to enter the exercise screen and browse data.

Watch Face Switching

1. Long press the screen on the main watch face, and swipe left or right to select an image, tap the selected image to switch.
2. Settings → Watch Face and Cards → Watch Face → Swipe left or right to select an image, and tap the selected image to switch.

Menu Guide

1. Exercise: Choose from various exercise modes like outdoor running, indoor running, outdoor walking, outdoor cycling, etc. And set individual exercise goals: distance, time, calories, or no goal.
2. Exercise Records: Save exercise records; up to 40 records can be stored. If there are more than 40 records, they will start to be overwritten from the first record.
3. Heart Rate: Real-time heart rate monitoring for 24 hours, recorded every 5 minutes. You can view historical heart rate records through the app. The full heart rate monitoring feature is enabled by default and can be turned on/off in the app.
4. Blood Oxygen: Manually test blood oxygen saturation.
5. Activity Records: Record daily steps, moderate exercise time, and active hours.
6. Sleep: Monitor sleep quality, including sleep onset time, wake-up time, sleep stages (awake, light sleep, deep sleep), and sleep duration.
7. Music: Control phone music, switch songs, set playback modes, and adjust the phone’s volume using the watch.
8. Weather: Display the weather for the current day and the next three days for your location.
9. Stopwatch: Timekeeping with lap function.
10. Timer: Set timers up to 23 hours, 59 minutes, 59 seconds.
11. Alarm: Set alarms on the watch or sync from the app.
12. Flashlight: Activate the flashlight.
13. Find the Phone: Make the phone vibrate and ring.

Call Function

1. Compatible with voice calls with features such as dial/answer/mute and reject calls as long as the smartphone is nearby and connected to the watch.
2. It takes in 10 contacts from your phone via “TOZO Wear” for speed dial. You may dial a number or call up a contact from the call log on the watch.

Reminder Function
The watch supports multiple reminder modes including message reminders, incoming call reminders, low-power reminders, health reminders, alarm reminders, etc.

Settings

1. Watch Face & Card: Select dials, screen-off display, and card settings.
2. Display & Brightness: Adjust brightness,screen-off time, and always-on time.
3. Sound Settings: Adjust ringtone volume, and enable/disable mute mode.
4. Do Not Disturb Mode: Choose full-day or time Do Not Disturb Mode.
5. Vibration Intensity: Adjust watch vibration strength.
6. System Menu: Power off/restart the watch, factory reset, or connect the new phone.
7. User Guide: Scan the QR code for tutorials.
8. About the Display watch name, model, and MAC address.

Pull-Down Menu

1. Do Not Disturb Mode: Enable all-day Do Not Disturb Mode. All reminder-related functions do not vibrate or ring except for alarms.
2. Mute: Enable mute mode except for alarms.
3. Wake on Wrist Raise: Enable the Wake on Wrist Raise feature.
4. Brightness Setting: 5 levels of brightness, default is level 3.
5. Settings: Access the settings menu.

Pull-Up Menu
Notifications: Requires enabling notifications in the app.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>