LANDMANN 28673 Big Sky Fire Pit Instruction Manual

July 11, 2024
LANDMANN

LANDMANN 28673 Big Sky Fire Pit

LANDMANN-28673-Big-Sky-Fire-Pit-product

Specifications

  • Model: Landmann 28674
  • Includes: Spark guard cover, cooking grate, multi-purpose poker, fire pit, cooking grate pins, ring sections, nuts, washers,legs, bolts

Product Usage Instructions

Assembly Instructions

  1. Take each of the (3) legs and bolt them to the fire pit using (6) washers and (6) nuts. Tighten securely!
  2. Assemble (1) ring section to the fire pit using (2) bolts, only loosely tighten the bolts.
  3. Repeat the previous step for the remaining (2) ring sections. Ensure they fit together to form a continuous ring. Tighten all bolts securely!
  4. Thread each of the (3) cooking grate pins into the nuts welded inside the fire pit. Do not over tighten!
  5. Place the spark guard on the cooking grate pins to keep sparks contained. Use at all times.

Product Usage
If you wish to grill, place the cooking grate on the cooking grate pins. Remember to remove it when not grilling.

Sandpaint Finish
Note: Minimal peeling or flaking of paint may occur due to varying heat intensity. This is normal and does not affect safety or performance.

Maintenance
The poker can be used for tending the fire, removing the cooking grate, lifting off the spark guard, or relocating the Big Sky fire pit.

FAQ

Q: What should I do if a part is missing or defective?
A: Contact Landmann USA at customerservice@landmann- usa.com or 1-800-321-3473 from Monday to Friday, 8 AM to 5 PM Eastern Time. Proof of purchase may be required.

This Owner’s Manual is provided and hosted by Appliance Factory Parts.

Landmann 28674 Owner’s Manual
Shop genuine replacement parts for Landmann 28674

Find Your Landmann Grill Parts – Select From 200 Models
——– Manual continues below ——–

BIG SKY ® FIRE PIT
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE ASAMBLEA

PLEASE READ ALL RULES FOR SAFE OPERATION BEFORE ASSEMBLY AND HELPFUL HINTS BEFORE USE.

The name Big Sky® is a registered trademark of Landmann® USA.
LANDMANN-28673-Big-Sky-Fire-Pit- \(1\)

READ FIRST!
RULES FOR SAFE OPERATION

  • FOR OUTDOOR USE ONLY!
  • USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES!
  • DO NOT USE ON LAWNS, WOODEN DECKS OR ASPHALT!
  • KEEP BIG SKY AWAY FROM BUILDINGS, FLAMMABLE ITEMS AND VEHICLES.
  • THE BIG SKY FIRE PIT IS FOR ADULT USE ONLY.
  • DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
  • KEEP SPARK GUARD ON BIG SKY WHILE IN USE.
  • DO NOT USE IN WINDY CONDITIONS!
  • DO NOT OVERLOAD OR USE FOR BURNING GARBAGE.
  • NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START FIRES.
  • NEVER USE UNDER LOW HANGING TREE BRANCHES, TRELLIS, OVERHANGS OF ANY KIND INCLUDING COVERED PORCHES.
  • USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BE HOT WHILE IN USE.
  • BEFORE EACH USE MAKE SURE BIG SKY IS IN GOOD WORKING CONDITION.
  • USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL
  • REMAIN HOT FOR SOME TIME.

PARTS LIST

When unpacking the Big Sky from the carton, make sure you find and become familiar with all the pieces listed below

LANDMANN-28673-Big-Sky-Fire-Pit- \(2\)

TOOLS NEEDED FOR ASSEMBLY:

Adjustable Wrench, Phillips Screw Driver

HELPFUL ASSEMBLY INSTRUCTIONS:

STEP 1
Take each of the (3) legs and bolt them to the fire pit (as shown in the diagram to the left) using (6) washers and (6) nuts. Tighten securely!
STEP 2
Assemble (1) ring section to the fire pit using (2) bolts, only loosely tighten the bolts. STEP 3
Repeat STEP 2 for the remaining (2) ring sections. Make sure the (3) ring sections fit together to form a continuous ring. Tighten all bolts securely!
STEP 4
Take each of the (3) cooking grate pins and thread them into the nuts welded on the inside of the fire pit. Do not over tighten!
STEP 5
Place spark guard on cooking grate pins. The spark guard purpose is to keep sparks contained in the fire pit. PLEASE USE at all times. STEP 6
Before using you must place 5 lbs of sand on the bottom of the fire pit. The sand insulates the area below the pit and protects against the corrosive nature of the ashes.

MULTI-PURPOSE POKER
The poker can be used not only for shifting and tending the fire, but also for removing the cooking grate, lifting off the spark guard or pulling Big Sky to another location.

HELPFUL HINTS FOR USAGE

  • ADDING SAND TO THE BOTTOM OF BIG SKY HELPS PROTECT
  • AGAINST THE CORROSIVE NATURE OF THE ASHES AND WILL
  • EXTEND THE LIFE OF THE PIT.
  • BURN YOUR BIG SKY 3 TIMES BEFORE USING TO COOK ON.
  • IF YOU ARE NOT GOING TO USE BIG SKY FOR A LONG PERIOD OF TIME, STORE AWAY OUT OF THE WEATHER AND ELEMENTS.
  • DO NOT LET YOUR BIG SKY FILL WITH WATER.
  • DO NOT DUMP ASHES WHERE THEY COULD START A FIRE.
  • DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.

COOKING GRATE

If you would like to grill, place the cooking grate on cooking grate pins.
PLEASE NOT E: Please remove cooking grate when not grilling.

SANDPAINT FINISH

Note: Since the heat intensity from the fires will vary depending on the type and amount of fuel used, you may experience minimal peeling or flaking of the paint. This is normal and will not affect the safety or performance of this fire pit.

Congratulations on your purchase of the Big Sky Fire Pit! At Landmann USA, we strive to provide you with an easy to use, easy to assemble product. However, in the unlikely event your package should have a missing or defective part, please contact us at: customerservice@landmann- usa.com
-OR-
1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required. Thank you!
Landmann USA
Cartersville, GA 30120
Made in China
© 2008 Landmann USA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals