TRANGJAN J05 Finder Tag Earbuds User Guide
- July 11, 2024
- TRANGJAN
Table of Contents
Finder Tag Earbuds
J05
Product Introduction
Features
- Ergonomic design, wearing solid, comfortable fit
- Flagship sound quality headphones
- Super battery life, fast charging
- Support Apple Find My positioning platform
- Bluetooth V5.3
Specification parameter
Name: Finder Tag Earbuds
Mode: JO5
Input: 5V 0.5A
Outopu: 5V 0.2A
Speaker: ¢10mm
Impedance: 32Ω
Sensitivity: 105dB
Playback time: 4-6h
Frequency Response Range: 20HZ-20kHz
Transmission distance: ≥10m
Bluetooth protocol: HSP,HFP,A2ZDP,AVRCP
Charging por: Type-C
Left/right earphone charging tim: 1.2h
Battery capacity: 400mAh
Function: Global Positioning Finder
Size: 57X57X26.5mm
First use operation
-
Tear off the insulating film.
-
Put the earbuds into the charging case and close it to charge (then the case start charging).
-
0pen the cover of the charging case, they will turn on and ready for pairing (when one indicator turns red and blue alternately, the other one no light) .
Warm notice: If earbuds don’t turn on or there is no sound coming out, please put the earbud back,into the charging case and close it again, make sure that earbuds are in the charging state before opening the lid and taking out them to use. -
The indicator of one earbud will go off and the other one will flash red and blue alternately (in pairing mode).
-
Turn on the Bluetooth function on your phone and search for “JO5” and connect it. NOTICE: such as the left and right ear can not be paired with any one headset no sound when the first off the phone Bluetooth, the twa headphones back to the charging box, take out the two headphones, three click on one of the headset touch key to enter the left and right headset pairing for re-pairing (binaural bright red and blue 2S pairing is successful, the vice-ear indicator lights go out, the main ear of the red and blue lights alternately flashing.
Restore factory setting
- Turn off the Bluetooth on your cell phone, take out the headset from the charging box, when there is no connection, the cell phone quickly four clicks to touch the MFB key to enter the restoration of factory settings, the headset red/blue light at the same time for three seconds after the restoration and automatic shutdown.
- Please delete all the connection records on the phone and re-search “JO5” after deleting the records and then reconnect.
Warm notice: For each single earbud, when it is in standby mode in the
case, you Can’t use it to play the previous song or turn down the volume.
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and
regulatory Standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS
and watchOS are trademarks of Apple Inc. IOS is a trademark or registered
trademark of Cisco in the U.S. and other countries and is used under license.
To use the Apple Find My app to locate this item, the latest version of iOS,
iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires
the latest version of watchOS.
How to use Find My
-
Device power on
Press and hold the button for five seconds. The device will beep and turn on. -
Bind device
– Open Apple’s own “Find My” app.
– Put the device close to your iPhone, tap the “Items” tab, select “Add New Item” and click “Other Supported Items”.
– For devices with the word JO5, tap “Connect”.
– Fillin the “Custom name” to name your device and choose an emoaji.
– Agree to register the device to your Apple ID.
– Tap “Finish” to bind successfully. -
Enable Lost Mode
– Open Apple’s own “FindMy” app, click “Devices” at the bottom of the screen, and then click the name of the device.
– Under “Lost Mode,” click “Enable.”
– Follow the on-screen instructions and click “Continue” to enter your contact number or email.
– After clicking “Next” to verify the information, please click “Enable” again ta complete the settings. -
Remove device
– Open Apple’s own “FindMy” app, click “Devices” at the bottom of the screen, and then click the name of the device.
– Find “Remove Item” at the bottom of the list and tap “Remove” to complete the operation.
Note: After deleting the device, the device will emit a prompt tone, and the device will not shut dawn and is in pairing mode. If there is no re- pairing within 10 minutes, the device will leave the pairing state and the device and app cannot be paired. If you need to pair a device, you need to click the device button once and the device will ring. At this time, the device enters the pairing state and can be paired with the app again.
How to use product buttons
-
Turn on the device
Press and hold the button for five seconds. The device will beep and turn on. -
Device status confirmation
Double-click the device button twice and the device will beep, indicating that the device is working. If the device does not beep, it means the device is turned off. Press and hold the button for five seconds to turn on the device. -
The device re-enters pairing status
After deleting the device, the device will sound a beep, device will not turn off, and will be in pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing state, and the device and app cannot be paired at this time. If you need to pair a device, you need to click the device button once and the device will ring. At this time, the device enters the pairing state and can be paired with the app again. -
Reset
First, in Find My app, remove the device. Then after the device is turned on, double-click the device button and the device will beep. Immediately press and hold the device button for about 10 seconds until the device beeps. Release the button to complete the factory reset. The device can then be paired with the new account. -
Turn off
When the device is powered on, if you press the device button 5 times continuously within 2 seconds, the device will sound a beep and enter the shutdown state.
Thank you for buying our products,please read the instructions carefully for
safe use of the device.and please reserve the instructio for future use.
Warning:
The device is suitable for safe use in non-tropical climates and at
altitudes of 2 km and below.
Announcement:
- When using, please be sure to read the manual first, otherwise it may lead to improper use, damage to your equipment, and loss.
- Do not place this product in a humid place or soak it in water.
- It is strictly prohibited to drop, hit, disassemble or attempt to repair this product yourself.
- It is strictly prohibited to expose this product to the sun or place it in a heat source or flammable place.
- Do not leave this product in a car as high temperatures from sunlight may cause damage to the product.
- If you find any defects or malfunctions in the product, please stop using the product immediately and contact your seller.
Name and content of harmful substances in products
| Part Name | Harmful Substance |
|---|---|
| (Pb) | ( Hg ) |
| Find Thing Earbuds | X |
This form is prepared in accordance with the provisions of SJ/T 11364.
Ο: Indicates that the content of the hazardous substance in all homogeneous
materials of this part is below the limit requirements specified in GB/T
26572.
X: Indicates that the content of the hazardous substance in at least one
homogeneous material of the component exceeds the limit requirements specified
in GB/T26572, and there is currently no mature alternative in the industry
that complies with the environmental protection requirements of the EU RoHS
directive.
All information on this product is measured according to the manufacturer’s
standards. If there are any printing or translation errors, we ask for your
understanding. Product design and specifications are subject to change without
prior notice.
| The numbers in this logo indicate that the product has an environmentally
friendly use period of 10 years under normal use.
---|---
| The numbers in this logo indicate that the product has an environmentally
friendly use period of 5 years under normal use.
Warranty Regulations Service Commitment
Warranty regulations
Warranty service is limited to the effective warranty period under normal
use. If there is a non-human damage failure caused by quality problems of the
product itself, the following three guarantee services will be enjoyed with
the invoice and this three guarantee certificate in accordance with the
national three guarantee regulations:
From the date of purchase, there is a 7-day refund guarantee, a 15-day
replacement guarantee, and a 1-year warranty.
Please bring this certificate and valid product purchase invoice when
repairing.
This certificate cannot be altered, otherwise it will be regarded as invalid.
This certificate becomes effective after being stamped by the seller.
Non-warranty regulations
The following situations (but not limited to the following situations) are
not within the scope of the three-guarantee service:
The content on the three-gquarantee voucher is inconsistent with the physical identification of the product or has been altered;
Unauthorized repair, unauthorized disassembly, misuse, collision, liquid intrusion, and modification;
Damage caused by failure to use, maintain, and maintain the product in accordance with the product instruction manual
Product damage caused by human factors;
Damage caused by force majeure such as floods, fires, lightning strikes, etc.;
There is no three-gquarantee certificate and valid invoice, and it is impossible to prove that the product is within the validity period of the three-guarantee.
………………….
**Warranty Card
User Info
User name…………………..
e-mail………………………….
Mailing address……………..
Contact number…………….
Postal code……………………
Product information
Product name………………..
Product model……………….
Product barcode/Number/Batch number……….
Vendor information**
Name…………………………….
Address…………………………
Telephone……………………..
Sale date……………………….
Postal code……………………
Invoice number……………..
Remark…………………………