ENERLITES 17027-F3 3 Speed Slide Fan Control and LED Dimmer Instruction Manual
- July 10, 2024
- ENERLITES
Table of Contents
INSTALLATION INSTRUCTIONS
17027-F3
3-Speed Fan Control and
Dimmer Switch
2-Single Pole
SPECIFICATIONS
Voltage ……………………………………120VAC, 60Hz
Fan Load………………………………………….2.5A
Operating Temperature……………………………32°F-104°F
Incandescent – Halogen / LED – CFL………………..360W / 200W
DESCRIPTION/ FEATURES
Enerlites 17027-F3 3-speed fan and dimmer switch combines functionality for both ceiling fan speed control and light dimming into a single convenient unit. With three adjustable fan speeds, you can easily set the desired airflow level, while the dimmer function allows you to adjust the brightness of compatible light fixtures to create the perfect ambiance in any room. This switch offers intuitive control and seamless integration, making it an ideal choice for enhancing comfort and ambiance in your living space.
- Single Pole light and fan control
- No neutral wire required.
- Terminal screws for easy installation.
WARNING
Turn off the power at the circuit breaker before installing the Fan Control.
Please read and understand these instructions before proceeding with the
installation. This device is designed for installation in accordance with the
National Electric Code and local regulations. We recommend that a qualified
electrician
performs the installation. Ensure that the circuit breaker or fuse(s) are
turned off and power is disconnected before wiring the device.
CAUTION – To reduce the risk of overheating and possible damage to other
equipment, Do Not Install to control a receptacle, motor-operated appliance,
fluorescent lighting fixture or a transformer supplied appliance.
– Risk of Electric Shock – More than one disconnect switch may be required to
de-energize the device before servicing
Use copper wire only
WIRING DIRECTIONS
- Insert the HOT wire to the fan’s HOT terminal.
- Insert the FAN wire to the fan’s LOAD terminal.
- Insert the LIGHT wire to the fan’s LIGHT LOAD terminal.
- Insert the GROUND wire to the fan’s GROUND terminal.
OPERATING INSTRUCTIONS
Before using this switch to control your fan, be sure to first set the speed
on the ceiling fan to high. Some fan models may have a pull string attached to
its side or underside.
Please check the fan manufacturer’s instructions on how to change fan speed.
The dimming slider has an off position when you move the slider all the way
down. There will be a noticeable click when you slide to turn off.
Be sure to use dimmable light bulbs!
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
© 2024 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0203240245
REV 20232103
Documents / Resources
|
ENERLITES 17027-F3 3 Speed Slide Fan Control and LED
Dimmer
[pdf] Instruction Manual
17027-F3 3 Speed Slide Fan Control and LED Dimmer, 17027-F3, 3 Speed Slide Fan
Control and LED Dimmer, Slide Fan Control and LED Dimmer, Control and LED
Dimmer, LED Dimmer
---|---