DigiKuber TK10 Smart Watch EKG User Manual

DigiKuber TK10 Smart Watch EKG

Watch quick instructions

Parts introduction

Press and hold the side button to turn the watch on.

Charging method and activation

Before using the watch for the first time, it needs to be charged and activated. Use the equipped magnetic charging cable to attach to the metal point on the back of the watch, and connect the other end of the charging cable to a USB charging head or a computer USB interface.

Install watch APP
Scan the following QR code or go to major application markets to download and install “DeepFit”.

Device requirements: iOS 9.0 and above; Android 4.4 and above, Bluetooth 4.0 is supported.

Main function page

Main interface/dial

• On the main interface, long press the touch screen or in the APP menu, click “theme selection” to enter
• On the main interface, press the side button to enter the menu function page, and then press the side button or swipe left to return to the dial interface.

Step count/distance/calories
Check the number of steps walked, the distance walked and the consumption at any time during the day Calories can be synchronized to the APP to view exercise data.

• Body temperature

  • Switch to the body temperature interface, you can enter the real-time monitoring of questions Can be synchronized to the APP, connected to the APP, with automatic detection function, dealt can be kept for 30 days.
  • Note: When testing the body temperature, the bottom temperature must be in full contact with the skin (test after wearing for 10 minutes). The body temperature test will be affected by the environmental temperature difference and only serves as a warning reminder. For details, please refer to the medical professional equipment and the doctor’s diagnosis.

• Heart rate
  Switch to the heart rate interface, you can enter the real-time heart rate monitoring, the data can be synchronized to the APP, connected to the APP, there is an automatic detection function

• ECG
  Press and hold the side electrode key or the ECG test interface to make the bottom two electrode pads and the side electrode key fully contact the skin for testing. The test report needs to be viewed in the APP.

• Blood oxygen
  Switch the watch to the blood oxygen interface to enter blood oxygen monitoring, and the data can be updated to the APP synchronously.

• Blood pressure

  • First connect to the mobile phone App to perform blood pressure calibration. After the calibration is successful, switch to the blood pressure test interface of the bracelet to enter the blood pressure test. The monitoring data can be updated to the APP simultaneously. and there is a test report.
  • Note: The test results are for reference only and cannot be used as medical data.

• Sleep
  You have a deep sleep/light sleep/sleep time all night, calculate your sleep quality, sleep data can be synchronized to the APP.
  Note: Sleep data will only be available when you wear the watch and fall asleep.

• Stopwatch
  Tap the stopwatch to enter the stopwatch function, and swipe right to exit.

• Music
  When connected, tap Music to control the music player on the phone.

• Shortcut function
  Swipe down on the main interface to enter the shortcut function interface, select options such as “Find Phone, Lock Screen, Brightness, About, Settings” “, and click the icon to enter the corresponding function.

• Information
  Click on the message to view the content of the message, slide up to turn the page, slide down to exit.

• About
  Click the about icon to display the machine model and the last four digits of the Bluetooth address.

• Brightness
  Click the brightness icon to freely select the screen brightness.

• Raise your wrist
  Tap the wrist lift icon to enter, you can choose to turn on or off the wrist lift.

• Shut down
  Click the shutdown icon to enter, you can shut down.

• Other function reminders
  After the APP is successfully connected, open the setting permissions and keep the Bluetooth of the phone and the watch in the connection and pairing state. When a message comes, there will be a vibration reminder

Basic parameters

• Connection mode: Bluetooth connection
• Input: 5V,500mA MAX
• Device requirements: Android 4.4or iOS 9.0 and above

Caution

1. Prohibit the use of an adapter with charging voltage greater than 5V, charging current greater than 2A, and charging time of 2-3 hours.
2. Prohibit charging in the presence of water damage.
3. Do not disassemble the case of this product without permission, the product will be damaged and lose warranty eligibility.

Special note

1. This product is not a medical device, the measurement results are for reference only, not for any medical purposes and basis. Please follow your doctor’s instructions and do not rely on the test results for self-diagnosis and treatment.
2. This manual is based on existing information, in the spirit of continuous improvement, the principle of continuous development, the company reserves the right to change product specifications and functions, and any product described in this manual to modify and improve.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>