Enerlites 66212 Straight Blade Plugs and Connectors Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites 66212 Straight Blade Plugs and Connectors
MODELS:
Installation
- WARNING : TO AVOID FIRE, SHOCK, OR DEATH, UNPLUG CORD OR TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
- Loosen assembly screws on plug surface, and separate device into device housing and device cover (P1). Then loosen the terminal screws inside (P2).
- Pass the wires through the cord clamp, remove insulation exposing bare copper wire.
- Insert bare copper wire into inner wire clamp and tighten each terminal screw.
- Assemble device housing with device cover. Align keyed device cover with key on device’s housing, tighten assembly screws and the cord clamp screws (P2).
Wire Diagram
© 2020 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0210200161
Documents / Resources
|
Enerlites 66212 Straight Blade Plugs and
Connectors
[pdf] Installation Guide
66212 Straight Blade Plugs and Connectors, 66212, Straight Blade Plugs and
Connectors, Blade Plugs and Connectors, Plugs and Connectors
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>