Enerlites 66215 15/20 Amp 125VAC Flanged Inlet with Front and Back Cover Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites 66215 15/20 Amp 125VAC Flanged Inlet with Front and Back Cover
INSTALLATION
66215/66205 15/20 Amp 125VAC Flanged Inlet with Front and Back Cover
- Use the template to drill 1-3/4″ diameter hole.
- Feed the cord through the cutout until the flanged inlet is flush with the installation surface.
- Use a 1/8″ drill bit to pre-drill the mounting holes for the screws on hard surfaces.
- Secure the flanged to the surface using provided screws.
- Plug in a live cord and you are ready to use or cover when not in use.
66215/66205 15/20 Amp 125VAC Flanged Inlet with Front and Back Cover
- Use the template to drill 1-3/4″ diameter hole.
- Feed the cord through the cutout until the flanged inlet is flush with the installation surface.
- Use a 1/8″ drill bit to pre-drill the mounting holes for the screws on hard surfaces.
- Secure the flanged to the surface using provided screws.
- Plug in a live cord and you are ready to use or cover when not in use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>