ggmgastro KND700 Cupboard Type Refrigerator Instruction Manual

ggmgastro KND700 Cupboard Type Refrigerator

Specifications:

• Product: Cupboard Type Refrigerator
• Model: [Insert Model Number]
• Dimensions: [Insert Dimensions]
• Capacity: [Insert Capacity]
• Power Supply: [Insert Power Requirements]

Product Usage Instructions:

Installation

1. Locating
   Locate the cupboard type refrigerator in a place that meets the specified requirements for performance.

2. Cleaning
   Before plugging in the refrigerator, ensure that the area is clean and free from any foreign materials that could obstruct ventilation or the cooling system.

3. General
   Verify that the voltage and frequency of the electricity supply match the values indicated on the warning labels of the refrigerator. Use a grounded plug for safety.

4. Labels
   Check the labels on the refrigerator for specific instructions regarding installation and usage.

5. Operation
   Follow the operational instructions provided in the manual for optimal performance.

Using the Refrigerator

• Precautions
  Take necessary precautions while operating the refrigerator to avoid any accidents or damage.

• Limits
  Be aware of the limitations of the refrigerator to prevent overloading or misuse.

• Recommendations
  Follow the manufacturer’s recommendations for efficient use of the refrigerator.

Maintenance

• Inspection
  Regularly inspect the refrigerator for any signs of damage or wear and tear.

• Special Maintenance
  Perform any special maintenance tasks recommended by the manufacturer to ensure longevity of the refrigerator.

• Cleaning which can be performed by the User
  Regularly clean the interior and exterior of the refrigerator as per the instructions provided in the manual.

FAQ :

• Q: Can I extend the cable of the refrigerator for installation?
  A: It is forbidden to extend the cable of the refrigerator for safety reasons. Ensure that the cable meets safety standards and is not damaged.

• Q: Where should I locate my cupboard type refrigerator?
  A: Place your refrigerator on a flat, straight surface away from heat sources and ensure proper ventilation around the unit for optimal performance.

• Q: How should I increase the height of my cupboard type refrigerator?
  A: To increase the height, revolve the refrigerator in a clockwise direction at five o’clock position.

CUPBOARD-TYPE REFRIGERATOR INSTRUCTIONS MANUAL
CUPBOARD-TYPE REFRIGERATOR INSTRUCTIONS MANUAL FOR USERS AND MAINTENANCE

INTRODUCTION

• COOLING MAINTENANCE ENDURANCE TESTS
• The Cupboard type Refrigerator which you have purchased is at your service to provide you all you may need after obtaining approval following special quality control and endurance tests conducted by the specialized personnel.
• Note : The images in the manual are for example purposes only and they not be identical to your model.

INSTALLATION

• LOCATING
• TEAR THE PACKAGING COVERING THE PRODUCT EXCLUDING THE PART UNDER IT AND ABOVE THE PALETTE. In order to make sure that the cupboard type refrigerator is at balance, it should be lifted via a forklift or bearing panel and place it to where it is desired to be located. Make sure that the area where the Cupboard type Refrigerator is to be placed is clean and open to prevent suction of materials by the cooler section of the product and such materials being collected inside the condenser thus diminishing the system performance.
• After locating the Cupboard type Refrigerator, the adjustable Inox feet can be adjusted by turning it inside or outside.
• Remove the protection film of the Cupboard type Refrigerator by a blunt object which is not cutter..
• DISTANCES FOR LOCATING THE CUPBOARD-TYPE REFRIGERATOR

CLEANING

• After locating the Cupboard type Refrigerator as we desire, we need to clean it as we desire. The initial cleaning will be made by water and detergent which does not include chlorine. The accessories
• may be placed as desired after cleaning and drying the product. We recommend you to clean the Cupboard type Refrigerator on a daily basis in the manner suitable to clean stainless steel.
• Abrasive chlorine- Acid based cleaning products should not be used. Avoid from cleaning by cleaning with water directly.

GENERAL

• Before plugging in the vertical type of refrigerator, verify that the voltage and frequency conforms to the values stipulated in the warning labels of the device.
• The electricity system should be plugged to grounding plug so as to ensure protection of the magneto thermal key and differential.
• Check that the electricity partition is suitable for the consumption to be made.
• The cable of the refrigerator should have 4,8mm input and grounded plug and Schuko type or F type (named as EEC 7-4″) plug.
• It is forbidden that the cable should be prohibited and extended due to safety reasons.
• Do not place any foreign materials into the ventilation protection or cooling system area.
• It is obliged that a connecting pipe should be available to the local system or the recycling system accompanied by the condenser Apply for the required regulations for each country.
• The floor where the refrigerator is to be located and installed on should be plain and straight which is an obligation for its performance.
• Make sure that there are no other heat sources around the refrigerator.
• In order for the components which the refrigerator consists of to give full performance, the air inlets inside the refrigerator should prevent air intake.
• Do not install your cupboard type refrigerator in open areas.

CONSUMPTION TABLE FOR THE REFRIGERATOR

POSITIVE CUPBOARDS| POWER VOLTAGE| PHASE| ****

CURRENT (A)

| CONSUMPTION (W)| POWER CORD| FUSE| DIFFERENTIAL

(A) DEVICE

---|---|---|---|---|---|---|---
KND700| TENSION 230V 50/60 Hz| 1+N| 1,6| 368| 3×1.mm2| 10A| 30mA
| | | | | | |

LABELS
The explanation for the labels inside your refrigerator is as follows.

SNACK, GASTRO AND PASTISERIA EXTERIOR DIMENSIONS AND WATER DISCHARGE OUTLETS OF CUPBOARD TYPE OF REFRIGERATORS (MM)

Operating the Cupboard Type Refrigerator

• After completion of interior cleaning of the refrigerator, and placing it to the desired position, connect it to the electrical circuit and immediately after you adjust the power indicator to 1, or cupboards starts working.
• The temperature displayed by the thermostat shows the interior temperature of the cupboard.
• The thermostat is activated within 2 minutes after it is connected to the electrical circuit of the cupboard type refrigerator.
• The temperature displayed by the thermostat after the refrigerator starting its operation is the initial temperature of the cupboard. This number will change into the desired temperature as the door is in closed position.
• The temperature of the cupboard type refrigerator needs to increase to the desired temperature before placing any products into it.

Thermostat and control panel

USING THE CUPBOARD TYPE REFRIGERATOR

• Cupboard type refrigerator was designed with the purpose to preserve the food stuff and beverages in the best way possible.

• We recommend that hot foodstuff and containers, chemical materials or products containing abrasives and medicines not to be put into the refrigerator and to use the refrigerator based on its purpose.

• We may determine the different categories for the use of cupboard type refrigerator based on different temperatures.

• POSITIVE

• Between -2 and +8C

| Designed to protect and preserve the freshness of the foodstuff and beverages
---|---

• NEGATIVE
• Between -18 and -22C

| Designed to protect the products which have previously been shocked

Recommendations

1. Avoid using your refrigerator to cool the extremely hot products to obtain the optimum performance from your refrigerator.
2. Let’s avoid keeping the doors of your refrigerator for long periods of time.
3. Avoid filling the refrigerator in the way to exceed its loading limits.
4. We should open the doors as rarely as you can so as to prevent the foods to reach critical stages after power failures or electricity cut offs for more than 20 minutes..

Precautions

1. Never lean onto the refrigerator when its doors are open; this is strictly prohibited.
2. Do not approach the refrigerator without shoes when the floors are wet or with wet hands.

Limits

MAINTENANCE

• We would like to give you as well as the technical assistance personnel instructions to ensure most efficient and trouble free and life long operating of the cupboard type refrigerator .
• We will mention practical and quick inspection of the machine before contacting the service as well as cleaning issues which we believe that it will be useful.

CLEANING TO BE PERFORMED BY THE USER

• Before any cleaning, the electrical connection of the device must be cut off and the power indicator must be adjusted to OFF or O.
• In cupboard type refrigerators, discharge pipes are available for cleaning and possible flow of liquids. In order to prevent that it is blocked with solid wastes, the cap of the pipe must be removed during  cleaning and it needs to be cleaned. It also prevents the wastes to be transformed into solid state.

INSPECTION OF THE MACHINE
It is possible for you to inspect your cupboard type refrigerator before you contact with your service. The failures which may occur in some cases are simple and they can be solved by the user.

1. The Cooler doesn’t work
   By controlling that the power indicators operates or not, check if the cupboard type refrigerator receives the electricity.

2. Temperature too High

   • Check if there are any sources of heat in the surrounding area.
   • Check if the thermostat was cut off between 0°C and -18°C. Press set button on your thermostat once and release the button.
   • Control if the room temperature is higher than +32°C which is the maximum operating temperature of the device, otherwise you need to select the “tropical heat “option.
   • Make sure that the materials inside were not placed in such a way so as to prevent ventilation of the materials inside and the ventilation is inside and active to ensure cooling.
   • Make sure that the condenser is clean : remember that the cooler especially the grills of the condenser needs to be clean to provide efficient energy saving. The frequency of cleaning depends on the properties of use.

3. If any unusual sounds are heard

   • Check the balance of the unit and ensure that the doors have been properly closed.
   • Make sure that no objects touch the dismountable components of the cooler.

SPECIAL MAINTENANCE

• Cleaning the Condenser: Try not to bend the aluminum grills of the condenser, otherwise air will not be allowed to pass and condensation will be prevented in which case the service guarantee will be rendered null and void.
• Make sure that the condenser temperature is not higher than what is determined inside the refrigerator.
• Insufficient ventilation will render the service guarantee null and void.
• Ensure that the doors are properly closed.
•  Do not dismantle the components unless you turn off the product.
• In order to prevent some components from burning due to high temperature, take the required precautions while you approach the condenser unit.
• If the flexible power cable is damaged, it needs to be replaced with the manufacturer, after sales service or the authorized technical personnel.
• In case of replacement, the grounded cap needs to be relocated.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>