Jabra Elite 2 True Wireless Earbuds User Manual

Elite 2 True Wireless Earbuds
User Manual

Welcome
Thank you for using the Jabra Elite 2. We hope you will enjoy it!

• Customizable music and powerful bass on the go.

• 2-mic technology for clear calls.

• Sleek Danish design & comfortable fit.

• Up to 7 hours battery in the buds, with a total of 21 hours with the case.

• Engineered for noise isolation.

• IP55-rated rainproof protection, plus a 2-year warranty*.

• Alexa** on tap. Tap to ask Alexa, plus one-touch Spotify playback***.

• Against failure from dust and water with the Jabra Sound+ app registration
  ** Alexa voice assistant and features only available for Android devises version 6.0 or higher
  *** Instant Alexa activation and one-touch Spotify playback compatible with Android only

Jabra Elite 2 Overview

Jabra Elite 2 earbuds

Charging case

Included accessories

USB-C charging cable

How to wear

Carefully insert each earbud into your ear.
Position the microphone on the right earbud towards your mouth.

Changing EarGels
For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel light and comfortable in your ear. The medium EarGels are pre-mounted on the earbuds. 

How to charge

The Jabra Elite 2 offers up to 7 hours of battery and up to 21 hours with a charging case and fast charge.

Charging the earbuds

Place the earbuds in the charging case and close the lid. It takes up to 2 hours to fully recharge the earbuds.
When the earbuds are removed from the charging case, the LEDs on the earbuds will light up red, yellow or green to indicate the battery status of the earbuds. The LED on the front of the charging case indicates the battery status of the charging case.

Fast charge the earbuds
Placing the earbuds in the charging case for 10 minutes, when they are at low battery, will fast charge the earbuds, offering up to 60 minutes of battery. Fast charging the earbuds requires that the charging case has a minimum of 30% battery.
You can see the current battery status of the earbuds using the Jabra Sound+ app.

Charging the charging case using USB Plug the supplied USB-C charging cable into the charging case and a USB-A power supply or certified wall charger. It takes up to 3 hours  to fully charge the earbuds and the charging case (depending on the charger used)

It is recommended to use a power supply with 5V +-0.25V and a maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a  power supply with a higher voltage.

What the LEDs mean

EARBUD STATUS

How to pair

Pairing with a mobile device

1. Power on the earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons to power the earbuds on.
2. Press and hold (3 sec) the Left and Right buttons simultaneously until the earbud LED  flashes blue. The earbuds will now be ready to pair with your phone.
3. Go to the Bluetooth settings on your smartphone and select the Jabra Elite 2 from the list of available devices to complete the pairing.

How to use

Power the earbuds off/on
Place the earbuds in the charging case to power off. Remove the earbuds from the charging case to power on.

To manually power off the earbuds, press both the Left and Right buttons simultaneously, or press and hold (5 sec) the Left or Right button when in Mono mode.
To manually power on the left or right earbud, press the Left or Right button.

Music controls

Left or Right button when not on a  call
| Volume up| Press and hold the
Right button
Press and hold the Left button| Volume down|
Double-press the Left button when listening to music| Next track|
Triple-press the Left button when listening to music  Repeat to skip to the previous track| Restart track or previous track|

Call controls

or Right button
Press the Left or Right button| Mute/unmute microphone| Press the Left or Right button
| Volume up| Press and hold the Right button
Press and hold the Left button| Volume down|

Voice assistant controls

Right button| Voice Assistant|
---|---|---
| Activate Voice assistant (Siri, Google Assistant, Alexa*)| Double-press the
Right button when not on a call

• Alexa voice assistant and features only available for Android devices version 6.0 or higher

One-touch Spotify playback
When configured using the Jabra Sound+ app, it is possible to control the one- touch Spotify playback using the right earbud.
One-touch Spotify playback is off by default.

Right button| Spotify|
---|---|---
| Resume last played Spotify song| Double-press the Right button when not listening to music or on a call
Play Spotify recommended song| Double-press the Right button when Spotify is open

Mono earbud use
The right earbud can be used individually for music playback or for calls. To activate mono earbud mode, place the left earbud in the charging case.

button when not on a call
Adjust volume| Use the volume controls on the paired mobile device

The left and right earbuds will automatically relink when both are placed in your ears.

Sleep mode
To conserve battery, the earbuds will automatically power off when they are out of range of your mobile device for 15 minutes and are not in the charging case, or when they have been inactive for 30 minutes.
To power the earbuds on, press the Left and Right buttons. Alternatively, place the earbuds in the charging case and then take them back out.

Multiple call handling
The earbuds can accept and handle multiple calls at the same time.

Multiple call handling

| End current call and answer an incoming call| Press the Left or Right button
---|---|---
Reject incoming calls, when on a call| Double-press the Left or Right button

Update firmware
The Jabra Elite 2 can be updated to the latest firmware version using the Jabra Sound+ app.
If notifications are enabled in Jabra Sound+, you will receive an automatic notification when a firmware update is available. Follow the instuctions in the app to firmware update the earbuds.

Reset the earbuds
Resetting the earbuds clears the list of paired devices and the factory resets all settings.

1. Place both earbuds in the charging case.
2. Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LEDs on the earbuds flash pink.
3. When the LEDs stop flashing pink the earbuds have been reset.

The earbuds will need to be repaired to your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.

Jabra Sound+ app

Support

FAQ
View the FAQs on Jabra.com/help/elite2

How to care for your earbuds

• Always store the earbuds in the charging case and safely protected them.
• To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
• It is recommended to store the earbuds between -20°C and 45°C (-4°F and 113°F).
• Do not store the earbuds for extended periods of time without recharging them (max. three months).
• If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
• It is recommended to use a power supply with 5V +-0.25V and a maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a power supply with a higher voltage.

Replacement accessories
Replacement or additional accessories can be purchased online at jabra.com/accessories.

Left and right earbud set

Using replacement earbuds

1. Pair the replacement earbuds to your phone (see section 6.1)
2. Update the earbud firmware using the Jabra Sound+ app.

Using a replacement charging case
Before using a replacement charging case, it is recommended to charge it for 1 hour.

©2021 GN Audio A/S. All rights reserved. Jabra:f is a trademark of GN Audio A/S. The Bluetooth) word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under License.

Made in China
MODEL: OTE150R/OTE150L/ CPB150

Declaration of Conformity can be found on
www.jabra.com/doc

References

• [FamilyName] | Jabra Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>