VISION FITNESS TM743B Entertainment Console User Guide

VISION FITNESS TM743B Entertainment Console

Console Codes

Press and hold the logo at the top of the screen for 5-7 seconds until the Product Dashboard displays.

• Product Dashboard –
  • This shows the usage stats (miles and time), console software version, Wi-Fi network information, and memory usage.
  • If you notice buffering when using Internet apps, press Bandwidth Test to launch a window that will show your current Internet speed; 3Mbps is required for standard streaming and 5Mbps is needed for high-definition streaming.

• Machine Settings –
  • Press Machine Settings to launch a keypad. Type the code below into the keypad to go into Machine Settings.
  • 3001 Enter (checkmark) – Allows you to view and edit settings.
• Machine Selection –
  • Press Machine Selection to launch a keypad. Use the code below to enter the First Time Setup (Setup Wizard).
  • 3002 Enter (checkmark) – Allows you to pair the console with the frame and set up other initial features.

• Machine Settings (3001) –
  After entering the code 3001 Enter on the keypad, you will be taken to Machine Settings. Once in Machine Settings, navigate to different screens by selecting the menus along the left side of the screen.

• First Time Setup (3002) –

  • After entering the code 3002 Enter on the keypad, you will be taken to a Setup Wizard.
  • Language, Time Zone and Date Format – Select the console’s default language, time zone, and date format. Click on the arrow in the upper right corner to move forward.

  *  **Network –** Select the Internet network to which you want to connect the console. If a password-protected network is selected, a popup will appear so you can enter the password. Click on the arrow in the upper right corner to move forward.

  *  **Machine Selection –** Select the frame to which your console is attached.

Note: If you select Treadmill, you will see the screen below. Select your country’s or region’s voltage requirement.

Connected Consoles – Updating Software

1. You can update software by entering Machine Settings. Press the Update menu on the left side of the screen, then press Check for Updates.

2. If updates are found, they will be displayed, and an Update button will appear. Press Update to download and install the available software update.

Note: You can force the console to always check for software updates by checking the box next to “Automatic Update”.

Not-Connected Consoles – Updating Software

1. Visit https://www.visionfitness.com/us/eng/support/software-updates to check for available software. If you find a different version than what is installed on your console, you can download it by clicking on the version link.

2. Once the link opens, you will see the software files. Click Download in the upper right corner of the screen to begin downloading. Once complete, you will see the software version file (example: 1.0.3.18). Open the file, copy the contents, and paste them in a USB drive.

3. With the software on a USB drive, enter Machine Settings. Select the tab called Update. Insert the USB drive into the USB port on the console. Select Update via USB. The software will display, and an Update button will appear. Select the Update button and console will begin downloading and installing software.

Connecting Compatible Bluetooth Devices

1. Turn on your compatible Bluetooth device. Press the Gear icon in the upper right corner of the screen and then select Device Pairing.

2. Choose either Speakers/Headphones or Heart Rate Monitors depending on what you want to connect. (Select Heart Rate Monitors to connect the heart rate strap that came with the console.)

Important: Vision uses short-range Bluetooth functionality, meaning if you are paired to your console, pause your workout and walk away, when you come back you will need to pair your device again.

Hiding or Rearranging App Icons

You can hide or rearrange apps as they display on your console screen. To do this, enter Machine Settings. Select the Applications menu from the left side of the screen. Touch and hold an app that you want to move, then drag it to Inactive to remove the app, or drag it to a new spot on the screen to rearrange where the app is located.

Volume Control and Screen Brightness

• Volume Control – If you begin using an app, TV (optional), or a Bluetooth device and the volume is too high or too low, enter Machine Settings (3001) and adjust the volume. Press the Hardware menu on the left side of the screen. Find Master Volume and slide the bar to increase or decrease volume.
• Screen Brightness – If your screen is too bright or too dim, enter Machine Settings (3001) and adjust brightness. Press the Hardware menu on the left side of the screen. Find Back light Brightness and slide the bar to increase or decrease brightness.

Error Message 0304

When this message appears on your console, it means your headphone insertion count has made it to a threshold that indicates the earphone board may fail. When this happens, enter Machine Settings. Select Hardware, then reset the insertion count by pressing Reset. This will allow you to continue using your unit. Contact Customer Technical Support to notify them of the error message and order a new earphone board. Please see your Owner’s Manual for warranty terms.

No Belt Movement or Resistance

The console has a setting called Demo Mode. When selected, this will stop communication from the console to the frame. This setting is often used on a sales floor so console features can be shown without the running belt moving or the console pausing. If you have a “no belt movement” or “no resistance” event, check the Demo Mode setting by going into Machine Settings, then select the General menu. The Demo Mode box should NOT be checked. Press the Home icon to return to the home screen, then cycle power from the frame power switch.

Keypad Test

If the handgrip buttons do not respond when pressed, an easy test you can perform is a Keypad Test from the console. Enter Machine Settings, select Calibration from the menu, then select Keypad Test. Press the unresponsive button and it should display on the screen.

• If the key DOES NOT display, the button or button wire harness is bad. Contact Customer Technical Support and let them know that you performed the test, and you need to replace the component.
• If the key DOES display but nothing changes on the unit, check the section called No Belt Movement or Resistance. Follow that instruction. If Demo Mode is off, contact Customer Technical Support and let them know the steps you took. They will help you with next steps based on your warranty terms.

Cleaning the Console

Use a micro-fiber cloth and LCD screen cleaner to clean your touchscreen. How frequently you should clean is based on use, but keeping the screen clean will decrease touch-related issues. If you do not have a screen cleaner, use a damp (with water) micro-fiber cloth to clean the screen.

Useful Resources

• Use the link below to find product registration information, warranty information, additional FAQs, troubleshooting information, setup/connectivity videos, and available software updates for consoles.
• Vision Fitness – https://www.visionfitness.com/us/eng/support

Customer Technical Support – Please refer to your Owner’s Manual for warranty terms

Warranty Product

info@johnsonfit.com

Out of Warranty Product

visionparts@johnsonfit.com

References

• Amazon.com: Screen Cleaner Kit - Best for LED & LCD TV, Computer Monitor, Laptop, and iPad Screens – Contains Over 1,572 Sprays in each Large 16 ounce Bottle – includes Premium Microfiber Cloth : Electronics
• Vision Fitness
• Vision Fitness

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>