microSHIFT FC002-002 SWORD Black Crankset Installation Guide
- July 10, 2024
- microSHIFT
Table of Contents
microSHIFT FC002-002 SWORD Black Crankset
Specifications
- Product: Sword Black Crankset
- Model: FC002-002
- Compatibility: 68x113mm JIS square taper bottom brackets
Product Usage Instructions
Tools Required:
- Torque Wrench
- 8mm Hex Wrench
- 14mm Socket Wrench
- Pedal Wrench
- Grease
Installation Steps:
Step 1: Bottom Bracket Installation
Ensure the bottom bracket is installed according to the manufacturer’s
guidelines.
Step 2: Right Side Assembly
- Slide the chainring and crank arm onto the right side spindle.
- Thread the crank arm fixing bolt into the spindle and torque to 35-50 Nm.
Step 3: Left Side Assembly
- Slide the left crank arm onto the left side spindle.
- Thread the other crank arm fixing bolt into the spindle and torque to 35-50 Nm.
Step 4: Pedal Installation
- Apply grease to the threads of the right pedal and thread the Right pedal into the right crank arm clockwise. Torque to 31-34 Nm.
- Apply grease to the threads of the left pedal and thread the Left pedal into the left crank arm counterclockwise. Torque to 31-34 Nm.
FAQ
-
Q: What bottom bracket size is compatible with the Sword Black Cranks?
A: Sword Black Cranks are compatible with 68x113mm JIS square taper bottom brackets. -
Q: What is the recommended torque for tightening the crank arm fixing bolts?
A: The recommended torque for the crank arm fixing bolts is 35-50 Nm. -
Q: How should I install the pedals on the Sword Black Crankset?
A: Apply grease to the pedal threads and tighten them with a torque of 31-34 Nm, clockwise for the right pedal and counterclockwise for the left pedal.
Sword Black Crankset Installation
- FC002-002
- www.microSHIFT.com
Important Notice
- REMINDER
Before installing the products, please read and understand the installation procedures. Improper installation can lead to premature product failures or even injuries. If you have any questions on how to install, please contact us or consult with a professional bicycle mechanic.
Tools and Supplies
- Torque Wrench
- 8mm Hex Wrench
- 14mm Socket Wrench
- Pedal Wrench
- Grease
Important Notice
- REMINDER
Sword Black Cranks are compatible with 68x113mm JIS square taper bottom brackets. Before installing the Sword Black Cranks, make sure to install the bottom bracket per the manufacturer’s guidelines.
Crank Arm Installation
- Slide the chainring and crank arm onto the right side spindle.
- Thread the crank arm fixing bolt into the spindle and torque to 35-50 Nm.
- Thread the crank arm fixing bolt into the spindle and torque to 35-50 Nm.
- Thread the other crank arm fixing bolt into the spindle and torque to 35-50 Nm.
Pedal Installation
- Apply grease to the threads of the right pedal and thread the Right pedal into the right crank arm clockwise. Torque to 31-34 Nm.
- Apply grease to the threads of the left pedal and thread the Left pedal into the left crank arm counterclockwise. Torque to 31-34 Nm.
- www.microSHIFT.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>