KONCAR UPV7215TM Built in Oven Owner’s Manual

KONCAR UPV7215TM Built in Oven

Specifications

• Product Model: UPV7215TM
• Rated Voltage: 220-240V~, 50Hz-60Hz
• Connection Power: 2.9kW
• Light Power: 25*2W
• Useful Volume: 72L

Product Overview

The Built-In Oven includes features such as a penica, control panel, ventilation openings, handle, and accessories like grilling rack, tray, telescopic guides, air frying basket, and food temperature probe.

Product Usage Instructions

Safety Instructions:
Ensure the appliance and packaging are intact upon arrival to guarantee safe operation. Refer to the symbols in the manual to understand potential risks. Follow all guidelines to prevent hazards.

Accessory Usage:
Place the grilling rack and tray between the first and fifth levels for proper operation. When using them together, position the tray below the grilling rack.

Quick Start Guide:
The control panel of the oven allows for various functions like AIRFRY. Follow these steps for quick setup and use:

1. Press function 1 to reset the oven.
2. Press shortly to enter function reminder setup. Hold for 3 seconds to lock/unlock child safety mode.
3. This function ensures even heat distribution for crispy frying by removing moisture from the food’s surface.
4. Preheat the oven before use for better food flavor.

FAQ

• Can I use the telescopic guides with all models?
  Telescopic guides are compatible with specific models only. Refer to your user manual for compatibility.

• How should I clean the oven after use?
  Allow the oven to cool, then wipe down the interior with a damp cloth. Remove accessories for separate cleaning if needed.

SAFETY INSTRUCTIONS

Intended use
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer. Please note modifications or alterations to the appliance are not allowed for your safety concern. Unintended use may cause hazards and loss of warranty claims.

Explanation of symbols

Read these operating instructions carefully and attentively before using /commis-sioning the unit and keep them in the immediate vicinity of the installation site or unit for later use!

WARNING

• The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa-bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appli-ance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• If the surface is cracked, switch off the appliance to avoid the pos-sibility of electric shock.

PROHIBIT

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
• A steam cleaner is not to be used.
• The appliance is not intended to be operated by means of an external timer or a separate remote control system.
• Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet. When the door or drawer of oven is open do not leave anything on it, or you may unbalance your appliance or break the door.
• Do not allow children to go near the oven when it is operating, especially when the grill is on.

CAUTION

• Please use the product under an open environment.
• During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.
• Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.
• The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring specifications.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including chil-dren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given super-vision or instruction concerning use of the appliance by person responsible for their safety.
• Accessible parts may become hot during use. Young children should be kept away.
• An all-pole disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufac-turer, its service agent or similarly qualified persons in order to avoid a hazard.

ATTENTION

• When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run the new empty product with the conventional cooking function, 250°C, 30 minutes to clean oil impurities inside the cavity.
• During the first use, it is completely normal that there will be slight smoke. If it does occur, you should wait for the smell to be cleared before putting food into the oven.
• Only use the temperature probe recommended for this oven. Oven door should not be opened often during the cooking period. The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unau-thorized personnel.
• When the door or drawer of oven is open do not leave anything on it, or you may unbalance your appliance or break the door.
• Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before touching onto the points that are exposed to the heat directly.
• If you will not use the appliance for a long time, it is advised to plug it off.

SPECIFICATIONS

• Product Model UPV7215TM
• Power Supply 220-240V~ , 50Hz-60Hz
• Electric Power 2.9kW
• Lamp Power 25*2W
• Product Size 72L

PRODUCT OVERVIEW

Oven
When taking out food, please wear heat-insulating gloves to prevent burns!Pay attention to the hot air when opening the oven door.

Accessories

Accessories Use
For the oven to work properly, the grill rack and grill tray should only be placed between the first and fifth levels. When used together, place the grill tray under the grill rack.

QUICK START GUIDE

Oven Control Panel

PRODUCT INSTALLATION

Cupboard Diagram (Standing Cupboard)

1. The thickness of the cupboard board is 20 mm.

2. If the power socket is installed on the back of the appliance, the depth of the cupboard opening shall be increased from a minimum of 590 mm to 620 mm.

3. The dimensions in the figures are in mm.

4. Reserve 5 mm for the door panel at the top and bottom respectively.

5. Reserve 20 mm for the door panel on the left and right respectively.

6. Reserve 20 mm for the door panel in thickness.

Cupboard Diagram (Ground Cupboard)

1. Reserve 5 mm for the door panel at the top and bottom respectively.
2. Reserve 20 mm for the door panel on the left and right respectively.
3. Reserve 20 mm for the door panel in thickness.

If the appliance is installed under the hob, the minimum thickness of worktop A is shown below:

1. The thickness of the cupboard board is 20 mm.
2. If the power socket is installed on the back of the appliance, the depth of the cupboard opening shall be increased from a minimum of 590 mm to 620 mm.
3. The dimensions in the figures are in mm.

Installation Important Instructions

• Content that means [mandatory]
  • The safe operation of this appliance can only be guaranteed if it has been installed to a professional standard in accordance with these installation instructions. The installer shall be liable for any damage resulting from incorrect installation.
  • The entire installation process requires two professional installers. Wear dry protective gloves during installation to avoid scratch or electric shock.
  • Fitted units must be heat-resistant up to 90°C, and adjacent unit fronts up to 70°C.
  • Please use a 16A socket.
• Content that means [prohibit ]
  • Do not install the appliance behind a decorative door or the door of a kitchen unit, as this may cause the appliance to overheat.
  • Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transit.
  • Do not block the vent of the appliance and the gap between the cupboard and the appliance.
  • Use extreme caution when moving or installing the appliance. It is very heavy, do not lift the appliance by the door handle.
  • If the power cord or power plug is damaged, stop using the appliance immediately, to avoid fire, electric shock or other injuries.
• Content that means [note]
  • Be very careful when moving or installing the appliance to avoid damage to the appliance or damage to the cupboards.
  • Before starting up the appliance, remove all packaging materials and accessories from the cavity.
  • The power socket shall be accessible to users (such as next to the cupboard) for easy power-off.
  • After installation is complete, make sure that the power plug is firmly inserted into the socket.
  • Please refer to the “Cupboard Diagram” for the requirements of net depth of the cupboard. The clearance between the cupboard bottom board and the rear board (or wall) shall not be less than 50 mm.

Installation steps

1. Please customize the cupboard according to the “Cupboard Diagram”.
2. Before installation, please check for normal power socket and appropriate grounding, and check whether the cupboard dimension meets the installation requirements.
3. Place the appliance in designated locations in the kitchen, install it in a vertical cupboard, and connect the power supply.
4. To locate the mounting fixing holes, open the appliance door and look at the side frame of the appliance (position shown above).
5. Fix the appliance to the cupboard with two rubber plugs A and screws B provided with the appliance.

Accessory installation

Accessory installation (Only for some models)

OPERATION INSTRUCTIONS

First Use

1. Before using it for the first time, please clean the oven and accessories to a certain extent. Remove the oven packaging shipping protection parts. Remove all acces-sories (eg: baking trays, grills, foam, etc.) from the cavity.
2. Thoroughly clean the attachment with soapy water and a rag or soft brush.
3. Wipe cavity and oven surfaces with a soft damp cloth.
4. To avoid fire, please make sure that the cavity is free of any remaining packingma-terials and accessories when using it for the first time.
5. When using it for the firsttime, keep the kitchen highly ventilated (open the hood and windows). During this time, keep children and pets out of the kitchen and keep the doors ofadjacent rooms closed.
6. In order to remove the smell of new products, run the following：

Setting the clock
Before using your oven, set the clock.
If you want to modify the clock again, please follow steps 1 .

1. In the standby state, Press the key.
2. Press the key to adjust the hour digit.
3. Press the key to confirm.
4. Press the key to adjust the minute digits.
5. Press the key to complete the clock setting.

Baking function

1. In standby or reminder state, press key to select the function.

Press the  key or slide the left and right to adjust the temperature.

1. Press to enter the time setting.
2. Press the key or slide the left and right to adjust the time.
3. Press the key to preheat the cavity (can be skipped).
4. Press the key to start cooking.

NOTE

1. Press to change the function during the cooking process or in the state of suspension, and the change will be automatically confirmed in 6 seconds.
2. During cooking, after pressing the key or key, you can adjust the time or temperature by pressing the key.
3. Do not put the ingredients in the oven for cooking before preheating is completed.
4. After preheating is completed, the progress bar is always on. At this time, put the ingredients in the oven for cooking.

Reminder function

1. In standby state or during cooking, press key to access the reminder Settings.
2. Press the key to adjust the hour digit.
3. Press the key to confirm.
4. Press the key to adjust the minute digits.
5. Press the key to complete the reminder setting.
   NOTE
   In the reminder state, press the key to view the reminder time.

baking function table

Probe function (Only for some models)

1. Insert the short end of the probe into the probe hole in the upper right corner of the cavity.
2. Insert the long end of the probe into the center of the food.
3. Press to select a function (Only the following functions: ).
4. Press the key to adjust the temperature.
5. Press the button to start cooking.

Air fry function

1. In standby or reminder state, press key.
2. Press the key or slide the left and right to adjust the temperature (150-250℃).
3. Press to enter the time setting.
4. Press the key or slide the left and right to adjust the time.
5. Press the key to start cooking.
   NOTE
   During cooking, after pressing the key or key, you can adjust the time or temperature by pressing the key.

Automatic menu

1. In standby state, press and hold the key for 3 seconds to enter the automatic menu setting.
2. Press the key to select the menu.
3. Start cooking:
   • For the menu with preheating function, when the preheating temperature is reached, the buzzer will give a reminder and display the time. At this time, put the ingredients into the oven for cooking.
   • For the menu without preheating function, put the ingredients directly into the oven and press the ” ” key to start working.

Automatic menu table

Demo mode
Demonstration mode, with power-off saving data function. Power off saving function: for example, when the demo mode is set to on, power off and then on is still on. After the demonstration mode is turned on, the heating pipe does not work.

1. In standby mode, press and hold the key to enter the demonstration mode and display “off “.
2. Slide the slider to the right to open the demonstration mode and display “off “; slide the slider to the left to close the demonstration mode and display ” on “.
   NOTE
   You can press the cancel key to exit the setting, or wait for 3 seconds to automatically exit the demo mode setting state and return to the standby state.

Sabbath mode
Sabbath mode has the function of power-off saving data. Save cooking data every 25 minutes. If the power is cut off during operation, after power on again, the Sabbath mode will continue to run until the cooking time is 0, or press the key to return to standby mode.

• In standby mode, press and hold the fast preheating key for 3 seconds to enter sabbath mode. The screen displays 5A8. The time adjustment range is 24-80 hours.

• The cooking time can be adjusted by sliding the slider. Press start key or start Ramadan mode automatically after 8 seconds.
  NOTE

  1. During operation, only the key is valid, and other keys are invalid.
  2. During the operation of sabbath mode, the furnace door is opened or closed, and the furnace light is not on.

Suggested menu table

CLEANING AND MAINTENANCE

Cleaning
Disconnect the power supply before cleaning and maintenance.
In order to ensure the life of the oven, it should be thoroughly cleaned frequently. Cleaning steps are as follows:

1. After cooking, wait for the oven to cool completely.

2. Remove oven accessories, rinse with warm water and dry.

3. Clean up food debris from the oven chamber.

4. Wipe the oven with a soft cloth stained with detergent, then dry with a dry soft cloth.
   NOTE

5. Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as not to damage the oven and its accessories.

6. Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.

Lamp Replacement

1. To prevent the lamp from being damaged, put a towel in the cavity.
2. Turn counterclockwise to remove the glass cover (corner lamp);
3. Gently pry open the glass cover with a flat-head tool (side lamp).
4. Pull out the wick and replace it (don’t turn it).
   Install the glass cover back and take out the towel.

Warning
To avoid electric shocks-please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold. before removing the lamp lens.

Door Cleaning
With good care and cleaning, your appliance will retain its appearance and remain fully functional for a long time to come.
For cleaning purposes and to remove the door panels, you can detach the appliance door. There is a lock lever on the left and right hinges of the appliance door. When the locking levers are closed, the appliance door is secured in place. It cannot be detached. When the locking levers are open in order to detach the appliance door, the hinges are locked. They cannot snap shut.
Warning

1. The hinges on the appliance door move when opening and closing the door, and you may be trapped. Keep your hands away from the hinges.
2. If the hinges are not locked, they can snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the appliance door, fully open.

Removal and installation of oven door

1. Open the appliance door fully.
2. Fold open the two locking levers on the left and right.
3. Close the appliance door as far as the limit stop.
4. With both hands, grip the door on the left- and right-hand side, and pull it out upwards.
5. The plastic inlay in the door cover may become discolored. To carry out thorough cleaning, you can remove the cover. Press the left and right switches of the cover.
6. After removing the door cover , that rest parts of the appliance door can be easily taken off so that you can go on with the cleaning . When the cleaning of the appliance door has finished , put the cover back in place and press on it until it clicks audibly into place

NOTE
Reattach the appliance door in the opposite sequence to removal.

TROUBLESHOOTING

If the problem cannot be solved or other problems occur, please contact the after-sales service.

Unable to start

| Power is not connected| connect power supply
The main power switch is not turned on| Turn on the power switch
Oven door not closed| Close the oven door
lamp does not come on| It’s broken| Contact after-sales service
Has a pungent odor or smoke| first use| No processing required

Food is not cooked

| Temperature is too low| Use a higher temperature
Food portion is too large| Cook food in smaller pieces or extend the cooking time.

Burnt or uneven food

| The temperature is set too high or the heating time is too long| Adjust the cooking temperature or time
The food is too close to the heating tube| Adjust the placement layers of accessories
The fan did not stop working after stopping the heating| Fan delays blowing for heat dissipation| No processing required

DISPOSAL AND RECYCLING

Important instructions for environment

• Compliance with the WEEE Directive and Disposing of the Waster Product:
• This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE).
• This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. 0Used device must be returned to official collection point for recycling of electrical electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environ- ment and human health.

Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

ABOUT COMPANY

• KONČAR – KUĆANSKI APARATI d.d.
• Slavonska avenija 16 , 10001 Zagreb , Hrvatska
• tel : ++ 385 1/2484 555
• fax : ++ 385 1/2404 102
• www.koncar-ka.hr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>