BEA Eagle Artek Unidirectional Opening Sensor for Automatic Doors User Guide

BEA Eagle Artek Unidirectional Opening Sensor for Automatic Doors

FAQ

Frequently Asked Questions

• Q: What should I do if the sensor is not detecting properly?
  • A: Check the wiring connections, adjust the antenna angles, and ensure there are no obstructions blocking the sensor’s view.
• Q: Can I use this sensor for automatic sliding doors?
  • A: Yes, you can mount the sensor above sliding doors for automatic operation.
• Q: How do I reset the sensor to factory values?
  • A: Refer to the user manual for instructions on resetting the sensor to its default settings.

DESCRIPTION

1. main connector
2. antenna
3. LEDs
4. push buttons
5. cover

TECHNICAL SPECIFICATIONS

Specifications are subject to changes without prior notice.
Measured in specific conditions.

• Other use of the device outside of the permitted purpose can not be guaranteed by the manufacturer.
  ** External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages.

OPENING THE SENSOR

• Insert the screwdriver on the left or the right notch of the sensor and twist it to remove the cover.

MOUNTING & WIRING

TIPS

• Avoid vibrations.
• Do not cover the sensor.
• Avoid proximity to neon lamps or moving objects.

APPLICATIONS

• Mounting on door axis (swing doors).
• Wall mounting above sliding or revolving door.
• Ceiling mounting in front of door (sliding, revolving or swing doors).

1. Apply the mounting template. Drill 1 hole (Ø 5 – 7 mm Ø 1/4’’) for the cable and pull it through. Drill 2 holes (Ø 3 mm Ø 1/8’’) for the screws.
2. Plug the connector accordingly.
3. First, position the cable according to the hole in the wall. To avoid crushing it, you can use the dedicated cable path. Next, fix the sensor firmly.
4. Connect to the door controller:
5. RED – POWER SUPPLY
6. BLACK – POWER SUPPLY
7. YELLOW – OPENING
8. YELLOW – OPENING.

Pin: Mount the sensor securely.

FIELD ANGLE ADJUSTMENTS

SETTINGS

Choose one of the following presettings:

• STANDARD: standard in- and outdoor installations
• CRITICAL ENVIRONMENT: critical installations due to surroundings or weather
• OPTIMIZED CROSS-TRAFFIC REJECTION: installations with a lot of parallel pedestrian traffic (e.g. shopping street)

PUSH BUTTONS

FIELD SIZE

FIELD SHAPE

IMMUNITY

REMOTE CONTROL

ACCESS CODE

The access code (1 to 4 digits) is recommended to set sensors installed close to each other.

• SAVING AN ACCESS CODE:
• DELETING AN ACCESS CODE:

Once you have saved an access code, you always need to enter this code to unlock the sensor. If you forget the access code, cut and restore the power supply. During 1 minute, you can access the sensor without introducing any access code.

RESETTING TO FACTORY VALUES:

TROUBLESHOOTING

For more information, please visit www.devancocanada.com or call toll free at 855-931-3334

CE: BEA hereby declares that this product is in compliance with European Directives :

• 2014/53/EU (RED), 2011/65/EU (RoHS).
• The complete declaration of conformity is available on our website.

This product should be disposed of separately from unsorted municipal waste.

JOIN OUR COMMUNITY!

Documents / Resources

| BEA Eagle Artek Unidirectional Opening Sensor for Automatic Doors [pdf] User Guide
Eagle Artek Unidirectional Opening Sensor for Automatic Doors, Eagle Artek, Unidirectional Opening Sensor for Automatic Doors, Opening Sensor for Automatic Doors, Automatic Doors, Doors
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>