tp-link TL-SF1005LP Unmanaged/Easy Smart PoE Switch Instructions
- July 9, 2024
- tp-link
Table of Contents
tp-link TL-SF1005LP Unmanaged/Easy Smart PoE Switch
Product Information
Specifications
- Manufacturer: TP-LINK CORPORATION PTE. LTD.
- Address: 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
- Product Type: Unmanaged/Easy Smart PoE Switch
- Product Model: TL-SF1005LP
- Product Version: V2, V3
Product Usage Instructions
Installation
- Choose a suitable location for the switch with proper ventilation.
- Connect the power adapter to the switch and plug it into a power outlet.
- Connect Ethernet cables from your devices to the switch ports.
- If applicable, connect devices that require power over Ethernet (PoE) to the PoE ports.
Configuration
- Access the switch’s web-based management interface using a web browser.
- Enter the default username and password (found in the user manual) to log in.
- Configure network settings, VLANs, QoS, and other parameters as needed.
- Save your configurations before exiting the management interface.
Troubleshooting
If you encounter any issues with the switch, refer to the user manual for troubleshooting steps or contact TP-LINK support for assistance.
STATEMENT OF COMPLIANCE
Manufacturer: TP-LINK CORPORATION PTE. LTD.
Address: 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
Product Type: Unmanaged/Easy Smart PoE Switch
Product Model: TL-SF1005LP
Product Version: V2, V3
We, TP-LINK CORPORATION PTE. LTD. hereby declares that the device complies with the applicable security requirements in Schedule 1 of the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 (the “Regulations”).
We will provide security updates for this product during the support period. The defined support period will end in 3 years after the product’s last end- of-life date. Up-to-date information concerning the defined support periods for the entire TP-Link product range and the products that have entered End of Life, please visit https://www.tp-link.com/uk/psti.
The person responsible for making this declaration:
Address:
TP-LINK CORPORATION PTE. LTD.
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
www.tp-link.com
Frequently Asked Questions
Q: How do I reset the switch to factory defaults?
A: To reset the switch, locate the reset button on the device, press and hold it for about 10 seconds until the LEDs flash, indicating a successful reset.
Q: Can I use this switch for home networking?
A: Yes, this switch is suitable for both home and small office networking environments.