DONGGUAN YC-JZTD Detachable ARM Desk Lamp Instruction Manual

DONGGUAN YC-JZTD Detachable ARM Desk Lamp

Specifications

• Power Input: DC 24V
• Output: USB-A 5V 2A, Type-C 5V 2A
• Power Adapter Input: AC Voltage 100V~240V, Frequency 50Hz/60Hz
• Power Adapter Output: DC Voltage 24V, Maximum Output Power 48W

Product Usage Instructions

Key Functions

• Power Switch: Short press to turn on/off the power. Memory function retains brightness and color temperature settings.
• Brightness Adjustment: Short press for brightness switching. Long press for automatic switching.
• Color Temperature Switching: Short press for color temperature switching. Long press for automatic switching.
• Timer: Short press for a 30-minute timer mode.
• Intelligent Light Sensor: Short press to open/close the intelligent light sensor mode for automatic brightness adjustment.

Tip : The illustrations of products, accessories, user interface, etc. inthe instruction manual are schematic illustrations in the manual are for reference only. Due to product updates and upgrades, there may be slight differences between the actual product and the illustrations. Please refer to the actual product.

Products

Instructions for Use

1. Key Function Definition
2. Power Switch: Short press to turn on the power, the default mode is always on, and the indicator light is always on, short press to turn off the power, the indicator light is off. When the power is not turned on with the memory function, the brightness and color temperature remain the same as the last time before the power is turned off, and the default mode is always on after the power is turned off).
3. Brightness Adjustment: In normal mode, short press the brightness adjustment for brightness switching, the indicator light flashes, the default 100% brightness, switching cycle (100%, 20%, 40%, 60%, 80%), long press the automatic switching, let go to stop.
4. Color Temperature Switching: In the normal mode, short press the color temperature adjustment for color temperature switching, the indicator light flashes, the default color temperature of 4500K, switching cycle (4500K/5000K/5500K/6500K/3000K/3500K/4000K) long press the automatic switching, let go to stop.
5. Timer: Short press the timer mode, time 30 minutes, and the indicator light is always on.
6. Intelligent Light Sensor : Short press to open the intelligent light sensor mode, the light will be intelligently adjusted with the environmental brightness, and the indicator light is always on; short press again to close the intelligent light sensor mode. (Maintain the original setting after power on/off)

Basic Parameters

Power Input and Output
Power is Input from An AC/DC Power Adapter

INPUT
Power Adapter Input Specifications:

• AC Voltage: 100V~240V
• Frequency: 50Hz/60Hz

Power Adapter Output Specification:

• DC Voltage: 24V
• Maximum Output Power: 48W

Power Input and Output

OUT PUT
The lamp can supply power to other USB-A or TYPE-C devices, maximum supply voltage = 5V, maximum supply current = 2A, and can supply power to USB-A and Type-c devices at the same time without affecting the other functions of the lamp.

Installation and Use

Installation Procedure

1. Firstly, connect the quick-connect power connector correctly and fasten it well, insert the connected power connector into the gap of the profile of the tablelamp bracket, and connect the table lamp bracket and fixed base
2. Install the screws to fix the table lamp bracket and fixed base. Fixed base, then put the sticker on and cover the screw mounting holes.
3. Attach the main control module to the short arm of the table lamp bracket by magnetic connection. Rotate the main control module to adjust the light direction by 360°. Table Lamp Bracket
4. Attach the magnetic suction type luminous assembly magnetically to the circular recess of the main control module, and rotate the magnetic suction type luminous assembly to adjust the direction of illumination.
5. Rotate the screw to tighten the clamps of the main control module and fix it to the edge of a square table.
6. MAGNETIC ARM DESK LAMP installation is complete, turn the horizontal rotary joint, adjust the table lamp bracket facing to a suitable angle, twist the flexibility adjustment knob counterclockwise, adjust the angle of the table lamp bracket, adjust the main control module to a suitable operating position, clockwise twist the flexibility adjusting knob to reduce the flexibility of the table lamp brake, keep the angle of the adjusted table lamp bracket. Unscrew the magnetic 360° rotating joint to orient the light to the right angle. Connect the power supply, short press the power switch to turn on the light, and you can start to use it.

Precautions for Use

1. Before use, please make sure the voltage is by the working voltage of the product, the use of improper voltage may damage the product and bring safety hazards. The use of inappropriate voltage may damage the product and bring potential safety hazards;
2. The product should be installed and used away from heat sources, such as hoods, heating outlets, direct sunlight;
3. The induction area on the surface of the product should not be covered by other items. When cleaning the surface of the product, you need to use a soft cotton cloth to wipe, can not use solvents containing corrosive cleaning;
4. This product has not done a waterproof test, please do not get wet or soak in water, so as not to bring potential safety hazards; |
5. Do not use this product as a child’s toy to avoid accidents;
6. The LED module can not be replaced, please do not disassemble the product.

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

• Q: Can the lamp supply power to other devices?
  • A: Yes, the lamp can supply power to USB-A or Type-C devices with a maximum voltage of 5V and a current of 2A simultaneously without affecting its other functions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>