TESLONG WF200 WiFi Endoscope Camera User Manual
- June 4, 2024
- TESLONG
Table of Contents
Wi-Fi Endoscope Camera
User Manual
General Information
Manual:
This operation manual allows you to work safely with the Wi-Fi Endoscope.
Please keep this manual for your Information.
Liability is void for any damage caused by not following this manual.
Notes:
Warning!
Failure to follow the warnings and instructions may result in electric shock,
fire, and/or serious injury.
Attention!
Not following this note can cause permanent damage to the device.
Tips!
Useful information.
Storage and transport:
Improper transport can harm the device.
Always transport this device in the provided box in order to prevent damage.
Information on disposal:
Electronic equipment does not belong to domestic waste, but must be disposed
of in accordance with the applicable statutory provisions.
Description
This new Wi-Fi Endoscope camera is a portable, hand-held, multifunctional
inspection camera system featuring an ultra-small size of 8.5mm diameter
camera, and a high-quality digital sensor offering crystal clear output. The
powerful wireless module provides a stable Wi-Fi connection. Users can view
the videos on iPhones, iPads, Android devices, and PCs, as well as capture
images (JPG)and record 720p HD videos (AVI) with the bundled application.
Applications
This premier tool is an economical solution for:
- Automotive / Diesel Repair and Maintenance
- Inspection of hard-to-reach or hard-to-see areas or equipment
- Plumbing, construction, restoration applications
- Science Education
- Outdoor Exploration
This appliance is not intended for medical use or personal inspection.
Safety
- Keep the tool dry, clean, and free from oil, water, gas, or other materials capable of causing corrosion.
- This appliance is not intended for use by persons with limited physical, sensory or mental capabilities.
- Keep bystanders, and children, away while operating the tool.
- Do not overreach, keep proper footing and balance at all times.
Technical Data
| Description | Data |
|---|---|
| Network Standard | IEEE 802.11 b/g/n |
| Antenna | Built-in IPEX antenna |
| Operating Frequency | 2.4GHZ |
| Data Rate | 802.11 b/g/n: up to 150Mbps |
| Camera Diameter | 8.5mm |
| Shaft Diameter | 7.0 mm |
| Image Sensor | 2.0 Megapixel CMOS |
| Video Resolution | 800×600,1024×768,1280×720 |
| Viewing angle | 60° |
| Depth of Field | 60mm—100mm |
| Camera Light Source | 6 adjustable high-intensity LEDs |
| ZIP Code | IP67 |
| LED Flashlight | 1W CREE LED |
| Operating Temperature | 32°to 113°F (0 °to 45°C) |
| Power Source | 4 x AA battery |
| Max battery life | 2-3 hours |
| Certifications | CE RoHS |
Product Information
- Phone Holder
- LED Adjust wheel
- Battery compartment
- Camera
- Flashlight
- Flashlight On/Off
- String
- Probe connector
- Support for a Phone holder
- Reset button (press and hold for 10 seconds to reset the device)
- Power On/Off (LED Indicator: the LED will shine BLUE when the device is On, or shine RED when the battery voltage is low)
Prepare to use
- Open the battery compartment
- Insert 4 AA batteries
Please ensure correct polarity
Please use an Alkaline or rechargeable Ni-MH battery for a long working time.
- Press the Power On/Off button to turn on the device
- Fit the phone holder to the support if you want to use the device with a smartphone attached.
Now the Wi-Fi Endoscope is ready to use, you can connect your PC, iPhone, iPad, or Android smartphone to this device to view, capture photos, or record videos.
PC users
-
Search the Wi-Fi signal on your PC SSID is “ WiFi_Endoscope”
-
Connect your PC to the Wi-Fi Endoscope.
Password is 00000000 -
Copy the software: ”Smart Camera.exe” from the bundled CD to your PC and run.
-
Enter the “Settings” menu and Select ” IP Camera: Wifi Endoscope” in the device menu, then you can see the live video in the Preview area.
iPhone and iPad users
- Search” WiFi Endoscope” on iTunes Store and install the app.
- Enter “Settings”-” Wi-Fi settings” and search the SSID:” WiFi_Endoscope”, connect to it with password:00000000
- Run the app and click on the play button, then you can see the live video.
Android smartphone users
Search ”WiFi Endoscope” On Google Play Store and install the app.
- Enter “Settings”-” Wi-Fi settings” and search the SSID ”WiFi_Endoscope”, connect to it with password:00000000
- Run the app and select” Wifi Endoscope”, then you can see the live video in the Preview area.
Please do not select the check box” Check for Internet service” in the advanced Wi-Fi settings menu.
Another platform
Users with devices running other platforms can watch the video with an
Internet browser (HTML5 support required).
After connecting to this Wi-Fi Endoscope, open the Internet Browser and go to:
http://192.168.1.1, you can see the web page below, press the button”
Preview Camera” to enter the video page to watch the live video.
You can also enter this URL directly to watch the video:
http://192.168.1.1:8080/stream_simple.html
Wi-Fi Bridge function
Users can connect to the internet with the” Wi-Fi Bridge” function.
You can connect to other Wi-Fi access point which has internet access and use
Wi-Fi Endoscope at the same time.
- Connect your PC or Smartphone to this Wi-Fi Endoscope
- Open an internet browser and go to: http://192.168.1.1
- Enter: Network—WiFi Bridge menu, you will see a webpage below.
- Click the” Scan” button to search for another Wi-Fi signal in your area, then click the” Join” button to establish a connection with the access point(a Wi-Fi password may be required). Click the “Save & Apply” button to save the setting.
- Now you can use the Wi-Fi Endoscope with internet access.
Troubleshooting
- No image or defects, noise in the image
-Check whether the probe is connected to the handle body correctly or reconnect the probe.
-Check the battery polarity to make sure it’s correct.
-If batteries are exhausted, replace the batteries. - LED lights are dim or blink
-Batteries are Low - Shut down the device and turn it on again when it’s not functioning normally.
- Forgot password
-Use a pin to press the reset key for 7 seconds to reset the settings of the device.
The default password is 00000000
If you have two or more Wi-Fi Endoscope devices and want to use them at the same time, you need to make sure that all the devices have different SSID, otherwise, you’ll need to change them manually.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
©NT/Nov 2015 WF200 V3.1-EN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>