TESLONG MS450-NTC Inspection Camera User Manual
- June 4, 2024
- TESLONG
Table of Contents
Inspection Camera
User Manual
Model: MS450-NTC
Product Manual
MS460-NTC is a high-performance industrial endoscope with a 4.6-inch high-
definition color screen. It is ergonomically designed so that users can
control the main buttons with just 1 hand. The snapshot and recording
functions are supported; photos and videos can be saved on TF memory card (
Micro-SD card). This product is equipped with LED-assisted illumination and a
small-diameter HD camera. The camera uses a high-sensitivity chip to help this
product perform in the dark. The camera probe is interchangeable, it can
connect to different probes with different sizes, dimensions, angles, or focal
lengths.
Warning: This product is an industrial endoscope camera and is not
intended for medical use or human examination.
Safety and Maintenance
- DO NOT violently hit the camera probe, DO Not imprudently pull the cable. When used in an environment with sharp objects, be extra careful to prevent the probe’s waterproof protective layer from being scratched during usage.
- The camera probe materials are not resistant to high temperatures. When checking the vehicle engine, please ensure that the temperature inside the engine is at the normal temperature.
- This product is not suitable for people with limited physical, sensory or mental capabilities.
- DO NOT allow children to touch or operate this device.
- In case the device is damaged, DO NOT disassemble it by yourself. Please contact the seller or the agent where you bought it to get a repair service.
Battery Description
- Please use 6V household charger that meets safety regulations to charge this device.
- If you do not use the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
-
Camera probe connector.
-
Snap: Take photos/start or end video recording.
-
Light control: To adjust the LEDs brightness of the camera.
-
Down:1.5X Zoom
Up: Image rotates 180° -
Mode: Take Photos, video recording & playback.
-
Enter: Confirm selection/freeze screen.
-
Settings: Enter or exit the settings menu.
-
Power: Press and hold for a few seconds to turn ON/OFF.
-
TF card slot
-
Charging port .
-
Camera probe lock (Press this button to unlock and pull out the camera probe)
-
Speaker
-
Installation hole of Screen bracke
-
Reset
-
Microphone
Press M
to switch to the take photos, and press to take a photo.| Press
**M**
to switch to video recording mode, press to start recording.
Instructions
Press & hold the Power button for a few seconds to turn ON/OFF device.|
Notice: Press this button to switch the front and side lenses. When connecting
a dual lens camera probe.
Press this button then pull out the Type-C plug of the probe from the
monitor.| The device is equipped with a TF memory card(inserted). Gently press
to eject the card.
Note: Connect the camera probe then turn on the device. Restart the device if replacing the camera probe.
How to insert TF card:
- Power off the device first before inserting the TF card.
- Make sure the direction and the front and back sides are correct when inserting the TF card.
- Do not use excessive pressure when inserting or removing the TF card to prevent damage to the card slot structure.
- You can only take photos or record videos when a TF card is inserted into the device.
Language Settings
The default language is English, and the system supports English, Chinese,
German, French, Spanish, Italian, Russian, and Japanese.
Setting path: Press the button twice to enter the setting page. Select the
second item (Language). Press up and down to select the language you need.
press OK to save your choice.
Copy photo and video files to computer
You can use a TF card reader to copy data directly or use a type—C cable to connect to a computer for copying.
Specification Parameters
Screen
Screen: 4.5-inch HD Display
Screen resolution(Pixels): 854×480
Support probe resolution(Pixels): 1.0 Megapixel HD
Image Capturing resolution(Pixels): 1920×1080
Video Recording Resolution(Pixels): 1280×720
Port: Type-C charging port, TF memory card slot
Camera
Diameter: 5.5mm or optional
Probe Length: optional
Resolution: 1.0 Megapixel HD
Viewing angle: 70°
Depth of Field: 30mm-100mm
Light Source: 6 adjustable high-intensity LEDs
Others
Operating Temperature: 32°F to 113°F (0°C to 45°C)
Power Source: 2500mAh Lithium Battery
Working Time: 3-4 hours
Charging Time:3-4 hours
Packaging
Monitor, camera probe, Type-C charging cable, user manual, screen bracket
Accessories-pick up hock, magnet, mirror (Note: 3.9mm NO accessories)
Customer Service
Please contact us if you have any product quality problems, we would love to
hear from you.
Manufacturer Service
support@teslong.com I
info@teslong.com
1-877-899-8809 (US) (Mon-Fri 8:00
AM-5:00 PM PST)
© TESLONG MS450-NTC 202109 V3 3.06.02.000216
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>