TESLONG NTS500B Inspection Camera User Manual
- June 6, 2024
- TESLONG
Table of Contents
Inspection Camara User Manual
Model No: NTS500B
Product manual
The NTS500B is a high-performance industrial endoscope with a 5.0—inch high def—nition color IPS screen. It is ergonomically designed so that the main function buttons can be controlled with one hand. The snapshot and recording functions are supported, photos and videos can be saved on a TF memory card (Micro—SD card). This product integrates high—brightness illumination, backlight on buttons and auxiliary LED lights for camera probe so that the product can be used normally and even in dark environments. The built-in 3500mAh rechargeable lithium battery allows about 4 hours of continuous operation. The camera-tipped probe is interchangeable, it can connect to different probes with different lengths, diameters, view angels, and focal lengths for different uses.
Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.
Safety
WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these may result in electric shock, fire, or serious injury.
- Keep the tool dry, clean, free from oil, water, gas, or other materials that may cause corrosion.
- This appliance is not intended to use for people with limited physical, sensory, or mental capabilities.
- This appliance is not intended for medical use or personal inspection.
- Keep bystanders or children away while operating the tool.
Battery description
- Please use a 5V household charger that meets the safety regulations to charge this device.
- This device can work while charging.
- If you do not use the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
- Camera probe connector
- Light control button: To adjust the LED’s brightness of the camera
- Snap: Take photos/start or end video recording
- Enter: Confirm selection/freeze screen
- Up and down selection button/rotate180°
- Mode: Take photos, video recording & playback
- Settings: Enter or exit settings menu
- Power button: long press to turn on/off
- Auxiliary light switch
- Charging port
- TF card slot
- 12 LED flashlight
- Speaker
- Microphone
- Reset button
- Screw-fixing hole
- Fixing bracket hole
Instructions
Press & hold the Power button for a few seconds to turn ON/OFF the device.
The device is equipped with a TF memory card(inserted). Gently press to eject the card
Insert the hose connector into the host interface, align it with the screw
hole, and then tighten the screw to fix it.
Note: Connect the camera probe before turning on the device. Restart the
device after replacing the camera probe.
How to insert TF card
- Power off the device first before inserting the TF card.
- Make sure the direction and the front and back sides are correct when inserting the TF card.
- Do not use excessive pressure when inserting or removing the TF card to prevent damages to the card slot structure.
Language Settings
The default language is English, and the system supports English, Chinese, German, Frech, Spanish, Italian, Russian, and Japanese.
Setting path:
Press the button twice to enter the setting page
Select second item (Language) on the settings page
Press up and down keys to select the language you need
Press to save your choice
Photo taking/Video Recording/Playback
Press M to switch the photo taking or video recording mode, and press to take a photo or start recording.
Press M to switch to playback mode, press to select photo or video to view, and press C3 to delete photo or video.
Copy photo and video files to computer
- Uses a TF card reader to copy data directly.
- Uses USB cable to connect to a computer for copying.
Pull out the probe camera first before using a USB cable.
Specification
Monitor
| Screen Type| 5.0-inch IPS HD display
---|---|---
Resolution| 854×480 pixels
Video Recording Resolution| 1280×720
Image Capturing Resolution| 1920×1080
Rotation| 180°
Port| Micro USB, TF Card Slot
camera
| Diameter| Optional
---|---|---
Cable Length| Optional
Resolution| 1.0 Megapixel-ID
Viewing Angle| 70°
Depth of Field| 1.2-4.0 inch (3cm-10cm)
Light Source| 6 adjustable high-intensity LEDs
Waterproof| IP67
Others
| LED Flashlight| 1W CREE LED
---|---|---
Operating Temperature| 32°F to 113°F (0°C to 45°C)
Power Source| 3500mAh Lithium Battery
Runtime| About 3-4 h
Charging Time| About 2-3 h
Input| 5V use charger
Certif actions Charge| CE FCC ROHS
Packaging
| NTS5008 inspection camera, gooseneck cable, USB cable, user manual,
Accessories-pick up hook, magnet & mirror
---|---
(Notice: Diameter 3.9mm cable NO accessories)
Should you need replacement(s) of any other components, please contact our customer service for help.
Customer Service
Please contact us if you have any questions
We love to hear from you.
12-month Limited Warranty
Lifetime Technical Support
support@teslong.com I
info@teslong.com to
1-877-899-8809(US) (Mon.-Fri. 8:00
AM-5:00 PM PST)
©TESLONG NTS500B 202104V3.
1 30600-0003-06
Documents / Resources
|
TESLONG NTS500B Inspection
Camera
[pdf] User Manual
NTS500B, Inspection Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>