boAt Nirvana Zenith TWS Earbuds User Manual

User Manual

Nirvana Zenith TWS Earbuds

NIRVANA ZENITH
Thank you for choosing boAt NIRVANA ZENITH. Please consider this manual as your guiding map to the unparatieled shores of musical bliss, Knowledge of Bluetooth and device connectivity is essential for steering this boAt. Therefore, we strongly recommend
thoroughly reading this manual. Also, you can refer to this if you face difficulties.

PACKAGE CONTENTS

1. 1 Pair of TWS Earbuds
2. 1 Charging Case
3. 1x Type-C Charging Cabe
4. 1x User Manual
5. 1x Warranty Card
6. 1x Catalogue
7. 3xPairs of Addtional Earmuffs
8. 1xFAG Card

OVERVIEW

1. CTC (Capacitive Touch Control)/ Power Button

POWER ON (FIRST TIME USER):
Step 1: To switch the earbuds on (Smart Power On), simply open the lid of the charging case when the earbuds are inside, Our IWP™ (insta Wake N Pair) technology enables the earbuds to power on automatically, indicated by the blue LED flashing for 1 second.
Step 2: Both the earbuds will automatically pair with each other and enter into the Connection Mode with alternate biue and red LED flashes,
CONNECTION MODE
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan,
Step 4: Search for NIRVANA ZENITH’ and pair accordingly.
Congratulations! Your earbuds are now successfully connected via Bluetooth.
Note:

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
• NIRVANA ZENITH remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices within the working range.

MONO (SINGLE EARBUD) MODE:
Step 1: Please note that both the earbuds can be used in Mono mode. Use Smart Power On for switching on the desired earbud.
Step 2 : The selected earbud will automatically enter the connection mode.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘NIRVANA ZENITH’ to connect.
Notes

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
• Please note that you cannot activate Dolby Audio, ANC, and Ambient modes during single earbud usage.
• Wear detection features for calls and ANC is applicable only in Stereo Mode.

QUICK GLANCE AT THE FUNCTIONALITIES:

2 Seconds| Long touch the right earbud CTC for 2 seconds to toggle between Normal/ Ambient/ ANC modes manually.
---|---
2 Seconds| Long touch the left earbud CTC for 2 seconds to switch between Dolby Audio and boAt Signature Sound modes.
10 Seconds| Long touch the charging case reset button for 10 seconds to perform factory reset.
4 Times| Tap the left earbud CTC for 4 times to trigger the voice assistant.

BASIC FUNCTIONS:

• Answer Calls: Plug both earbuds into your ears to answer incoming calls ANC mode is activated automatically. Once the call ends, the earbuds switch from ANC mode back to the previous operational mode.
  or

• Single tap the CTC on either earbud to answer incoming calls.

• Hang Up/ Reject Calls: Double tap the CTC on either earbud to reject incoming calls or end an ongoing call,

• Play/Pause Music: Simply plug in the earbuds insice your ears to start playback and remove them to pause music
  or

• Single tap the CTC on either earbud to play or pause a track

• Next Track: When playing music, double tap the right earbud CTC to skip to the next song

• Previous Track: When playing music, double tap the left earbud CTC to retum to the previous song.

• Dual EQ Modes: Long press the left earbud CTC for 2 seconds to switch between boAt Signature Sound & Dolby Audio modes. By default, the Dolby Audio mode remains active.

• In-Ear Detection in ANC Mode: Insert both earbuds inside your ears and remove them to switch between ANC and Normal modes respectively.

Note: Playback in the earbuds is automatically paused after accepting an incoming call.

CHARGING THE CASE:

Step: To charge the case. plug one end of the provided cable into the case and connect the other end to a computer, wall adapter. power bank etc.

seconds and then powers off

Case LED indication when the earbuds are charging within the case:

Note: Earbuds charging status will be shown after the case charge status.

VOICE ASSISTANT:

Step 1: Tap the left earbud CTC for 4 times to activate the smart voice assistant.
Step 2: The respective voice assistant screen pops up and you can speak your commands easly.
Tips: You can try out the following commands:
– What is the weather?
– Play a song
– Set a reminder
Note: If the voice assistant is not triggered, then the functionality needs to
be first enabled via your media device settings.

AMBIENT, ANC, AND NORMAL

(AMBIENT AND ANC OFF) MODES:
Long press the CTC on the right earbud for 2 seconds to toggle between Normal, Ambient and ANC modes of music. Ambient mode is for transparency towards the audible surroundings; while ANC mode cancels out the external noise up to 50 4B 50 that you can immerse fully in your playlists.
Note:
– By default, the Normal mode stays active.
– The operational cycle is Normal Mode (Ambient and ANC OFF) –> Ambient Mode —> ANC Mode
DOLBY AUDIO AND boAt SIGNATURE SOUND:
Long press the left earbud CTC for 2 seconds to switch between Dolby Audio and boAt Signature Sound. By default, Dolby Audio remains active.

boAt Adaptive EQ:
Adaptive EQ in these earbuds generates custom profiles tailored to your hearing level. A5 a result, you can hear uninteligible dialogue and sound elements witricut siraining as the audio adapts to your profile automatically.
The EQ level can be set up on the boAt Hearables app, attuned to your listening comfort.
BEAST™ MODE:
Triple tap the left CTC to switch to low-latency gaming mode, also known as the BEAST™ Mode. Tap the left CTC 3 times once again, to tun it off and return to standard music mode.
Made for the Gamers – By Gamers, BEAST” Mode reduces the latency significantly and improves the overall gaming experience.
Al ENX™ TECH:
Our Al-powered ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear on voice calls. You don’t have to activate AIENX™ as the 6x mics are equipped with the same and activated by default.
Deliver your voice without interruptions everywhere – traffic, railway stations, airports, workspace; literally wherever you are!
SMART POWER OFF:
Step 1: After usage, remove both the earbuds from your ears.
Step 2 : Place the earbuds back into the charging case in correct orientation and close the lid,
Step 3: The earbuds wil automatically switch off (and enter into charging mode)

FACTORY RESET:

Perform the Factory Reset in case you face any difficulty while operating your NIRVANA ZENITH.
Note: Before performing reset, clear “NIRVANA ZENITH” from pairing device history by forgetting the device.
Step 1: Open the case lid and place the earbuds inside in the correct orientation.
Step 2: Long press the charging case reset button for 10 seconds to perform factory reset. Green LED blinks 5 times rapidly on the charging case and red LED blinks 5 times rapidly on the earbuds to indicate successful factory reset.
Step 3: Close the lid and re-open it again after 5 seconds.
Step 4: Take out the earbuds from the charging case and perform a fresh connection.
Congratulations! Your NIRVANA ZENITH earbuds have been reset.

TROUBLESHOOTING:

Factory Reset
If there are other exceptions in usage| Place the earbuds back into the charging case and try using them again or perform the Factory Reset
If the touch controls don’t seem to respond| After long usage, residual stains and perspiration can affect the touch control area, please use
a clean cloth to wipe softly
If the left and right earbuds unpair with each other due to any anomaly| Perform the Factory Reset,

SPECIFICATIONS

(Non-ANC mode) at 60% volume;
Up to 7 hrs 45 minutes per charge. Up to 42 hrs additional Case playtime (ANC mode) at 60% volume
Charging Technology| ASAP™ Charge(5-min charge = 60 mins playtime)
Transmission Range| 10 m
Driver Size| 11 mm*2
Codec Support| SBC and AAC
Frequency| 20 Hz-20 kHz
Battery| 600 mAh (Case): 45 mAh’2 (Earbuds)
Charging Time| 1.5 hours (Case); 60 mins (Earbuds)
Charging Interface| USB Type-C

Charging norms & Precautionary Guidelines: –

1)Charger/Brick/Adapter
2)Cable/Wire| 5V 2A
: Standard Cable (35 strands ,@10mm diameter/ strand)
---|---

Note: Any other accessory can be used to charge the product as long as the above-mentioned norms are followed.
Note: Any other accessory can be used to charge the product as long as the above-mentioned norms are followed.

SAFETY CAUTION:

• Please follow the instructions to operate the earbuds smoothly.
• Please don’t use the earbuds in extreme temperatures.
• Please don’t use the product in water.
• Please keep the product away from heat sources, as the heat may damage it.
• Please don’t jam the ports, such as the charger port, LED port. etc.
• It is recommended to utilize the product below the maximum volume to protect your hearing and extend the service life of the earbuds.

RECOMMENDATION:

• The earbuds may start at 100% volume level when first switched on. You can adjust the volume to your preferred level using the volume controls on your phone/media device.

HEARABLES APPLICATION:

1.  boAt Adaptive EQ
2. Self Diagnostics: One tap fix for any errors
3. Over-the-Air Updates
4. Connection & disconnection status
5. Battery Level Monitor
6. Button Customization Control

Exciting features coming soon, stay tuned
*Compatible with Android and iOS devices

https://l.ead.me/bdAX6k

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>