SOLTECH 25w Orinda Pro Solar Decorative Area Light Instructions
- July 9, 2024
- SOLTECH
Table of Contents
SOLTECH 25w Orinda Pro Solar Decorative Area Light
- Easy installation and operation
- Cold-weather battery withstands frigid climates up to -40°C/-40°F
- Remote control included with one-button mode setting
- An efficient decorative bell-style fixture
INTRODUCING SOLTECH ORINDA PRO
ORINDA PRO solar light efficiently illuminates outdoor spaces like parking
lots, pathways, and parks. This solar light fixture provides 360-degree glare-
free, beam-styled lighting. Powered by renewable solar energy, ORINDA is a
stand-alone, off-grid pathway light with zero operational costs. ORINDA’s
elegant design makes it ideal for decorative commercial lighting. The ORINDA
high-powered LED solar lighting system comes complete with solar power
assembly, fixture, bracket, and all mounting hardware to attach to a pole.
SOLTECH can also provide a pole to meet wind load specifications.
- Easy installation and operation
- Cold-weather battery withstands frigid climates up to -40°C/-40°F
- Remote control included with one-button mode setting
- 180lm/W—highest efficiency in the industry
- Built-in MPPT controller with microwave motion sensor
- Adjustable angle for the solar panel allows maximum solar collection
- Zero Electric Bills. No trenching or disturbing surrounding Areas
- Marine grade aluminum & stainless steel fasteners for harsh environments
- Full self-charging time less than 11 hrs
APPLICATIONS
The ORINDA is a complete solar system used for areas such as pathways, parking lots, landscaping, parks, schools, trails, or any remote locations that have no access to conventional power. The ORINDA fixture is an efficient decorative bell-style fixture and provides great light output. This fixture works best for applications with a mounting height of 15’ to 25’.
LIGHT FIXTURES
LED Nominal Power| 25W
Lumen| 4,500LM
Color Temperature| 3,000K I 4,000K
Optic Type| Type II I Type III
Efficiency@5,000K| 180LM/W
Material| Die-Cast Aluminum
BATTERY
Operating Temperature| -40°C/-40°F to 140°F
Charging Temperature| -40°C/-40°F to 140°F
Capacity| 640WH
Operating Voltage| 12.8V
Charging Time| 11 Hrs
Run Time @ Full Power| 12–14 Hrs
SOLAR PANEL
Power| 115W
Operating Voltage| 18V
EPA @ 45°| 9.5
MAXIMUM AUTONOMY
Motion Sensor Mode| 40%–100% 64hrs
20%–80% 110hrs
Time Control Mode| Night Owl 56hrs Early Bird 50hrs
Constant Mode| 100% 26hrs
70% 38hrs
40% 68hrs
- The temperature can impact the battery’s charging and normal operation. If your place’s temperature is under 32°F, we advise you to use the SUNLIKE PRO version to achieve better lighting results.
- The solar charge time data is base on 77 degree F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2.
IES/ BEAM ORINDA PRO 25W TYPE III [ MOUNTING HETGHT 20FT ]
ORINDA PRO 25W TYPE II [ MOUNTING HETGHT 20FT ]
ORINDA PRO 50W
Weight Information
- Battery and Solar Panel: 48lbs
- Solar Lamp : 12lbs
- Mounting Bracket : 6lbs
INSTALLATION ACCESSORIES
SOLAR PANEL SLIP FITTER
POLE TENON ADAPTER DIAMENTION
Tenon adapter IS NOT included in the package, please contact the pole
manufacturer for the details.
ORDERING INFORMATION
SERIES| WATTAGE| OPTIC TYPE| COLOR
TEMPERATURE
| MOUNTING OPTIONS| FINISH
---|---|---|---|---|---
STLORNPRO = ORINDA PRO| 25 =25W
4,500 LUMENS
| T3 =TYPE III| 3 =3000K
4 =4000K
| SF =SLIP FITTER| GR =GREEN (RAL 6012)
| | | | | BK =BLACK (RAL 9004)
WARRANTY
ORINDA PRO products are covered by a 5-year limited warranty. SOLTECH Urban Light warrants to the original purchaser that this product is free from defects in materials and workmanship for 5 years from the date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instructions.
PANEL ANGLE GUIDE
The solar charge in a battery pack won’t last forever. The off-grid system
relies on stored solar energy for autonomy. Angling your solar panels properly
can boost the power intake of your solar lighting system. You want to angle
your solar panels at a tilt based on the area’s latitude.
Key
DETECTION ZONE
BEST FACING DIRECTION OF SOLAR PANEL
The area will dictate the installation of the fixtures and will sometimes
prevent the lights from facing south. But that’s okay! Panels facing West &
East won’t get as much light as Southern facing panels, but will still collect
a good amount of sunlight. A North facing panel also works, but it will take
longer to charge than any other direction. This would mean that the solar
charge will be less optimal if installations are facing North.
REMOTE CONTROLS
The range of the remote control to the indicator is 16ft (Day time) to 33ft (Night time). Because the sunlight will impact the signal of the remote control, we suggest our users to setup the mode before they install the light.
On/Off
When off is selected, the light will stop working. The solar panel will not
charge the battery and the battery will not supply electricity to the light.
Connect/Test
Remote control device can be connected with any lighting fixture, one at a
time. To connect, press the button once. It also functions as a test button.
To test, press the “Test” button once, the red light will indicate the fixture
is charging, green light indicates that the fixture is operating. Testing
lasts for 10 seconds, and then it goes back to the mode previously in use.
REMOTE CONTROLS
3. 40%~100% Motion Sensor Mode
Constant 40% brightness (turns on at dusk, turns off at dawn); 100%
brightness turns on for 2 minutes when motion is detected.
On/Off
When off is selected, the light will stop working. Solar panels will not
charge the battery, battery does not supply electricity to the light
.
Connect/Test
Remote control device can be connected with any lighting fixture, one at a
time. To connect, press once. It also functions as a test button. To test,
press the “Test” button once, the red light will indicate the fixture is
charging, green light indicates discharging. Testing lasts for 10 seconds
,
then goes back to the mode previously in use.
40%~100% Motion Sensor Mode
Constant 40% brightness (turn on at dusk, turn off at dawn); 100%brightness
turns on for 2 minutes when motion detected.
20%~80% Motion Sensor Mode (Default)
(IAP) Intelligent Adaptive Program Battery Control Technology
To extend the off-grid autonomy of the ORINDA under shady trees, heavy rain,
and thick clouds, our controllers now integrate an adaptive smart control
feature to actively track battery capacity and adjust light output
accordingly. Before integrating this feature, selecting a light output
percentage on the remote would yield an accurate percentage of max LED
brightness. Now with (IAP), the controller actively monitors the battery and
regulates the electrical current to the LEDs. The controller makes light
output of the selected percentage on the remote relative to battery capacity
rather than max LED output. This smart-control feature can increase our off-
grid performance by up to 40%.
Important
Dusk and dawn time may be different in other locations and seasons. The
sensors of our products will follow the light patterns of where it is
installed. The period shown in the chart above is just an example to help you
understand the different lighting modes only.
REMOTE CONTROLS
100% Constant Mode
100% brightness from dusk to dawn.
70% Constant Mode
70% brightness from dusk to dawn.
40% Constant Mode
40% brightness from dusk to dawn.
Timer Mode Disabled
Press this button to turn off Timer Mode; settings revert back to before Timer
Mode was last activated.
Time Mode 8 Hours
This is an additional mode that can work with any other mode. For example:
press this button at any time after you turn on 70%Constant Mode. If the light
turns on at 7pm at dusk, it will turn off at 3am. It will repeat the same
schedule hereafter until it is canceled by pressing Timer Mode Disabled
.
Timer Mode 4 Hours
This is an additional mode that can work with any other mode. For example:
press this button at any time after you turn on 70%Constant Mode. If the light
turns on at 7pm at dusk, it will turn off at 11pm. It will repeat the same
schedule hereafter until it is canceled by pressing Timer Mode Disabled
.
Important
Dusk and dawn time can vary for different locations and seasons. The sensors
in our products will monitor the light levels where it is installed. The
period shown in the chart above is just an example to help you understand the
different lighting modes. SOLTECH LLC reserves the right to update all product
data sheets at any time. Consult SOLTECH marketing specialists for publication
updates at hello@soltechlighting.com
- Copyright©2018–2024 SOLTECH LLC, All Rights Reserved.
- soltechlighting.com
- hello@soltechlighting.com
- I 510-891-1056 I 1460 Park Avenue. Emeryville, CA 94608 I