LEXIN LX-S4 Motorcycle Waterproof Bluetooth Speaker User Manual
- July 20, 2024
- LEXIN
Table of Contents
LEXIN LX-S4 Motorcycle Waterproof Bluetooth Speaker User Manual
Introduction
The LX-S4 is a waterproof 4” motorcycle speaker with v4.0 Bluetooth A2DP stereo, 50W with 100W peak per channel power amplifier built in 1’’tweeter with a 4’’ main speaker. You can stream stereo music wirelessly from a Bluetooth mobile phone, Aux-in audio source, or USB audio source.
Package Contents
- Speaker (Main Unit and Slave Unit) with completely integrated wiring harness
- Inside-hexagonal spanner M6
- Inside-hexagonal spanner M3
- Stand non-slip matting 1 inch
- Stand non-slip matting 1.5 inch
- Cable tie
- User Manual
Installation Instructions
Step 1: Use a clean soft cloth to cover the tank and the front wing,
during the installation of audio to prevent scratching of the wing or tank.
Step 2: Make sure the location of the installation of the sound, to
ensure that there is sufficient clearance to install the sound. Figure 1 shows
a variety of install options.
Step 3: Use the inner hexagon spanner m3 split under the host machine and
the auxiliary machine bracket B (see Figure 2) on the screw and the sound into
the handlebars, and measure the handlebar tube diameter, choose the
appropriate anti-skid pad (the product accessories to provide 1 inch and
1.5-inch options), M6 hexagon wrench is then used to adjust the direction of
the adjustment screw, adjust the sound installation direction, the speaker of
the direction toward the rider’s head to get the best results.
Step 4: Make sure that there is no extrusion line, then put on the
bracket B, and tighten the screws, the attention must be tightened to prevent
the unit from rotating. Figure 3
Step 5 : Sitting on a motorcycle, and then a slight adjustment of the
direction of the speaker, because the speaker is a direction, then need to get
the best effect of the head of the rider.
Step 6: Turn the handlebar to the full stop position, to ensure that the
audio box and fuel tank, the instrument panel, and other accessories have
enough clearance, according to the need to adjust the audio and support to
ensure that there is sufficient clearance. (Warning: To ensure that the
handlebar has enough clearance at all points, the gap may cause damage to the
motorcycle or out of control, resulting in serious injury or death.)
Step 7: The output wire of the sound output is arranged along the handle
of the car, and a fixed wire is used to fix the connecting box (Fig.4) with a
fixed wire.
Step 8: The power cord is connected to the positive and negative pols of
the battery(Fig.5), and the wiring harness of the power line is arranged along
the frame and is fixed with the fixing band, so that the wire is far away from
the position of the torsion point, the extremely high temperature and the
movement.
(Note: Secure the wire harness, which is far away from the moving parts,
the twist, and the extremely high temperature. The company does not undertake
any warranty for the failure of the electrical components caused by the
extrusion, curling, cracking, wear, melting, or wearing of electrical wires.)
Step 9: The red line is the positive power supply line, connected to the
positive terminals of the battery, and the black line is the negative terminal
of the power supply line, connected to the negative terminal of the battery,
after the completion of the junction, the redundant wires bundled together and
placed in the position of the battery box voids.
General Operation Instructions
Powering On
- Press & hold the knob to power on the Bluetooth speaker. 4.2 Powering Off
- Press & hold the knob to power on the Bluetooth speaker. 4.3 Charge
- Plug in the USB Charging cable to the USB port to charge a mobile phone or any DC5V electronics devices.
- The power output is DC 5V 1A. 4.3 Pairing a Stereo Bluetooth Adaptor
- Turn on the audio source and prepare the Stereo Bluetooth Adaptor for pairing
- Power on the LX-S4 to Bluetooth pairing mode (see above)
- Turn on or plug in the Stereo Bluetooth Adaptor
- The audio source will automatically start playing through the LX-S4 unit when pairing is complete
Note: Please turn off the other Bluetooth device when pairing, make sure that there is only one device is under pairing mode with the S4.
Pairing a Mobile Phone
- Power on the LX-S4, and there will be a voice prompt “Bluetooth Mode”, and the light on the speaker will blink blue to enter pairing mode
- Search for Bluetooth devices on your mobile phone. The speaker will be listed on your mobile phone as “LX-S4”; – It may ask for a PIN, if yes, enter 0000 for the PIN
- Your mobile phone will confirm that pairing is complete, and then the light on the speaker will stay on blue.
Note: This pairing operation is only required once for each mobile phone, and the speaker will remain paired with the mobile phone and automatically connect to the paired mobile phone again when they are within range of 30 feet. 5. Controls and Functions
Volume and Music Control
You can easily adjust the volume by Rotate the knob clockwise or anticlockwise. You will hear a tone when the volume reaches maximum or minimum level. Short press the knob to play and pause the music.
Bluetooth/USB/AUX IN Mode
Double-click the knob quickly to switch mode between Bluetooth/USB/AUXIN. When
in the music stream, press the knob to enter track control mode, and you will
see both green and blue lights flashing simultaneously, then you can rotate
the knob clockwise for the next track, and rotate the knob counterclockwise
for the previous track. It will exit track control after 8 seconds, or you can
press the knob to exit immediately to resume volume control.
Aux-In Music Playback
Turn on the speaker, and double click it again to switch into AUX IN mode, the
LED indicator will turn to green when it is in AUX IN mode. Plug in the
external audio source to the male 3.5mm jack to play.
USB Music Playback
Turn on the speaker, double-click it again to switch into USB mode, and the
LED indicator will turn to green flashing when it is in USB mode. Plug in the
U-disk audio source to the black USB port to play.
Download PDF:LEXIN LX-S4 Motorcycle Waterproof Bluetooth Speaker User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>