LEXIN B0C992FZD7 Portable Speaker Bluetooth With Motorcycle Helmet User Guide

HOW TO USE
MODEL S ？
User Guide

V 1.0
World #1
Helmet Bluetooth Speaker

Function Introduction

• Unique motorcycle helmet concept design
  Design patent number: ZL 2022 3 0552526.6

• Support 1+1 two devices music sharing

• Bluetooth 5.0

• 5W maximum power output

• Premium stereo sound system

• Build-in 5W high-quality full-frequency loudspeaker, dual extra bass diaphragm

• Support hands-free phone call

• Portable lanyard design, free to attach

Product Packaging

• Model S Mini Bluetooth Speaker*1
• USB-C CHARGING CABLE*1
• User Guide*1
• LINE-IN CABLE*1

Button Operation

Power Button: Power on/off
Previous Button： Previous track, volume down
Next Button： Next Track, battery life prompt, volume up
Play/Pause Button： Play/pause music, answer/hang up/reject incoming call, disconnect Bluetooth, sharing mode on/off

Basic Operation

Power On/Off
Power On： Press and hold the Power Button for 2 seconds until the startup chime ring and the voice reports current battery life.
Power Off： Press and hold the Power Button until the voice reports “Power Off”.
Note： The device will automatically shut down in 30 minutes if no device connects.

Battery Life Prompt
While in standby mode, double-click the Next Button, the Model S will report the current battery life.
The Battery Power is reported by 5 Levels： 100%/80%/50%/30% /low battery.
Note: When the battery capacity is low, it will notify you every minute, and it will automatically shut down until the battery reaches the minimum voltage setting.
Battery charge
Battery charging takes approximately 2.5 hours with 5V/1A ordinary charger.
Charging indicator light
During charging: Red light on.
Charging complete: Red light off.

Reset
If the system is stuck for some reason and the button function is invalid, you can click the 3.5mm LINE-IN input headphone jack with a small sharp object (Non-metallic object, such as toothpick, etc.) to reset the system. (As is shown in the picture below)

Bluetooth Mode
Phone Pairing
Step l: When powered on, the light flashes blue quickly and enters Bluetooth pairing mode.
Step 2: Go to Bluetooth settings on your phone, find the device named “Model S”.
Step 3: Click the device “Model S” to connect, the device will report “pairing successful” and the light will blink blue slowly, which indicates the connection is complete.
Note： For the slave speaker in Music Sharing Mode, you cannot pair it with mobile phone. You need to double click the Play/Pause button to switch back to Bluetooth mode first.
Disconnect the Bluetooth Connection
With Bluetooth connected, press and hold the Play/Pause Button to disconnect an existing Bluetooth connection, and will be able to reconnect with another Bluetooth device.
Bluetooth Automatic Connection
With Bluetooth on in your mobile phone, the Model S will automatically re- connect to the last two successfully connected phones.
Clear Bluetooth Pairing History
Press and hold the Previous and Next Buttons for 3 seconds to clear all Bluetooth pairing history and enter new Bluetooth pairing mode at the same time, the indicator light will flash blue quickly.

Phone Call Control
Answer Phone Call： Click the Play/Pause Button to answer the phone call.
End Phone Call: Click the Play/Pause Button to end the phone call.
Reject Phone Call: Double click the Play/Pause Button to reject an incoming phone call.
Disconnect Bluetooth connection: with the Bluetooth connected, press and hold the Play/Pause Button to disconnect the Bluetooth connection and enter the Bluetooth pairing mode.
Music Control
Play/Pause： Click the Power Button to play/pause a track.
Previous Track: Click the Previous Button to switch previous track.
Next Track: Click the Next Button to switch next track.

Volume Control
with the Bluetooth connected / During the phone call
Volume Up: Press and hold the Next Button to increase the volume, and the volume will be maximum by keeping press and hold the button;
Volume Down: Press and hold the Previous Button to decrease the volume, and the volume will be minimum by keeping press and hold the button.
Note： When the volume is set to maximum, there will be a tone prompt.
LINE-IN Mode
Use the LINE-IN cable connect to Model S, Model S can be used as an audio output device, and the indicator light will be green.
With LINE-IN cable connected, the device will automatically enter the LINE-IN mode after it is turned on. If the LINE-IN cable is unplugged, the device will automatically enter Bluetooth mode.

Music Sharing Mode
Note： Music sharing mode can only be used for two Model S devices.
When music sharing mode is activated, there is one and only one Model S device that remains connected to the mobile phone, which is the host device; the another Model S device needs to disconnect with the mobile phone then connect to the host device as a  slave device.
If the host device does not connect successfully with the slave device for 60 seconds, the host device will exit the music sharing mode and will be back to Bluetooth pairing mode.
Once the connection between the host speaker and the slave speaker complete, the speaker which connected to the mobile phone is the host speaker (left channel), and the other one is the slave speaker (right channel). Double click the Play/Pause Button of the  host speaker or the slave speaker to disconnect the sharing mode. After re-starting the speaker, the host speaker and slave speaker cannot be connected automatically.

Host and Slave Device Pairing
Step 1: Device A with mobile phone connected, double-click Play/Pause Button, the green Light flashes quickly, and the voice prompt “Sharing mode on”;
With device B turned on and without mobile phone connected.

Step 2: After device A and device B are successfully paired, the indicator light of device A flashes blue slowly;
After device B and device A are successfully paired, device B prompt “Slave speaker connected”, and the indicator light flashes slowly in blue.

|
---|---
Device A(Connected) LED Light flashes blue slowly| Device B(Connected) Indicator Light shows solid blue, voice prompt “Slave  speaker connected”

With host device in music sharing mode and music playing, user can add another one Model S device to play the same audio with the host device.

Device Control in Music Sharing Mode
Host Device：Operate music play/pause/track/volume on the host unit, and synchronize to the slave unit at the same time. If the host device is shut down, the slave device will be back to sharing mode and enter pairing state.
Slave Device：The slave device can only control the volume. Operations such as exiting the music sharing mode and power off will not be synced to the host device.

Automatic Reconnect in Music Sharing Mode
The host and slave speaker will be disconnected beyond the effective range, they will automatically reconnect again when they return to the effective range.
Re-starting the speaker, the host speaker and slave speaker can connect automatically.
Exit Music Sharing Mode
Operation on host speaker： Double-click the Play/Pause Button on the host speaker to exit the sharing mode and change to the Bluetooth Paring Mode. The slave device will enter pairing status of sharing mode.
Operation on slave Speaker：Double-click the Play/Pause Button on the slave speaker to exit the slave speaker status and change to the Bluetooth Paring Mode. The LED indicator flashes blue quickly.

Firmware Upgrade
The firmware of Model S device can be upgraded through the USB-C port by using a dedicated USB-C cable.

Technical Information

• Bluetooth Version: 5.0
• Effective Connection Range: ≥ 10 meters
• Rated Power Output: 5W
• Audio System: Mono Audio System
• SNR: ≥85dB
• Sound Input: Bluetooth, Line-in
• Class D Digital Amplifier: 1 X 5W
• Frequency Response Range: 100 Hz~ 15000 Hz
• Input Power: DC 5V/1A
• Input Power Interface: USB-C
• Battery Capacity: 2000mAh/3.7V
• Product Net Weight: 0.26KG
• Product Dimension (WHD): 12.2 X 8X 9.1 CM

Troubleshooting

sufficient.
2.The battery may be in protection mode or the battery is completely discharged, please charge the device.
3.Please make sure that the power on operation is completely correct.
No Sound| 1.Please check whether the speaker device has been connected to the mobile phone  correctly;
2. Please check if the speaker volume is set to the lowest, please try to increase the volume;
3. Please try to connect with another device.
Unable To Connect Or Pair With Bluetooth Device| 1.Please check if the speaker device is in Bluetooth pairing mode.
2.Please check whether the Bluetooth option of the mobile phone has been turned on.
Sound Distorted Or Cut In And Out| 1.Please confirm whether the audio file is damaged and try to switch to another music source.
2.Keep away from high-power electronic interference sources.
3.Whether the distance between the speaker and the mobile phone is more than 10 meters.

Maintenance and Care

Please read and follow all safety and usage instructions
For more information on Model S Bluetooth speaker, please refer to the user guide.

Important Safety Instructions

1. Do not place the speaker device near any heat sources, such as radiators, heat regulators, stoves, or other devices (including amplifiers) that generate heat.
2. Only use attachments/accessories specified by the manufacturer.
3. Please cut off the power of this device in thunderstorm days or when it is not used for a longtime.
4. For any maintenance matters, please consult the after-sales customer service of the merchant. It should be repaired in time if there is any damage to the speaker device, such as a damaged power cord or damaged plug, objects felling into the device, unable  to function properly, or being dropped.

Warning/Caution

| This symbol indicates that there is hazardous uninsulated voltage within the product shell, which may present a  risk of electric shock.
---|---
| This symbol indicates that there are important operating and maintenance instructions in the product guide.
| This product contains magnetic material. If this product is suspected to effect the operation of implanted medical devices, please consult your doctor.

Please place this product away from fire and heat sources. Do not place flame sources (such as lighted candles) on this product or near this product.
Do not modify this product without authorization.
Do not use this product with a power inverter.
This product uses only the included power supply.
Do not overheat the battery provided in this product, (eg: avoid sun exposure and keep away from fire, etc.)
Please dispose the used batteries correctly and follow the local regulations.
Do not incinerate it.

**** This symbol indicates that this product must not be discarded as household waste and must be sent to the relevant recycling department for recycling.
Proper disposal land recycling of waste helps protect natural resources, human health and the natural environment. For more information of disposing and recycling of this product, please contact your local civil affairs department, waste disposal service agent,  or the store sold this product. Removal of the rechargeable lithium-ion battery in this product must be done by a professional.

Warranty

LEXIN warrants that this product shall conform to and perform in accordance with published technical specifications and the accompanying written materials and shall be free of defects in materials and workmanship for a period of two years from the date of  purchase by the first consumer purchaser of the product.
The limited warranty extends only to the original consumer purchaser of the product and is not assignable or transferable to any subsequent purchaser/end- user.
This warranty is limited to repair or  replace under LEXIN’s discretion  of defective or unqualified  product, and LEXIN shall not be  responsible for the failure of the product to function properly or for any other condition not covered by the LEXIN warranty due  to:
(a)Any incorrect using or misuse of the product.
(b)Not adhering to LEXIN’s specifical specifications or instructions.
(c)Man-made damage caused by neglect, misuse or accident of the product
(d)Damage by using any auxiliary equipment or software not furnished by LEXIN.
Please return the product to LEXIN or to the LEXIN international distributor where it was purchased, provide the proof of purchase and receipt date to obtain the warranty during validity period.

www.quefairedemesdechets.fr

Lexin Electronics Inc.
1(800) 380 – 8248
www.lexin-moto.com
Backed by 2-Year Warranty
For technical support :
tech@lexinmotorcycle.com
@lexinmoto

References

• Lexin Motorcycle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>