LEXIN LOUDLID Bluetooth Speaker User Guide

LOUDLY Bluetooth Speaker
User Guide

LOUDLY Bluetooth Speaker

– For Online User Manual in English, Spanish, German, Italian, French, and Japanese. Visit www.lexin-moto.com, Go to Support – User Manual, and select “LOUDLID”.

Function Introduction

• Integrated motorcycle helmet concept audio system
  – Unique design patent number: ZL 2021 3 0536302.1

• Support 1+N multiple devices music sharing

• Bluetooth 5.0

• 20W maximum power output

• Premium stereo sound system

• Built-in 2.5-inch full-range speakers, dual extra bass diaphragm

• Support two mobile phones connection

• support hands-free phone call

• Supports 15W quick charge

• Built-in multi-color LED trim light

• Touch volume control

Lexin Electronics Inc.
Product Name: Bluetooth Speaker
Model: LOUDLY
Battery Capacity: 5000mAh/7.4V
Power:2*10W
Input: 5V==3A
CMIIT:XXXXXXXXXXX
IC: 24401-LOUDLY
FCC ID: 2ARGO-LOUDLY
Xxx 2000X

Product Contents

• LOUDLY Bluetooth Speaker*1
• User Guide*1
• USB-C Charging Cable*1
• Line-In Cable*1
• Pack Bag*1
• Packaging*1

Button Operation

Volume Touchpad: Adjust the volume.
Power Button: Power on/off, play/pause music, answer/hang up/reject an incoming call, disconnect Bluetooth.
LED Light Button: Switch lighting mode, and sharing mode on/off.
Previous Button: Previous track.
Next Button: Next track, battery life prompt.

Basic Operation
Power On: Press and hold the Power Button for 3 seconds until the LED flash blue and the voice reports the current battery life. Power Off: Press and hold the Power Button until the voice reports “Power Off”. Note: The device will automatically shut down in 30 minutes if no device connects. While in standby mode, double-click the Next Button, and the LOUDLID will report the current battery life. The Battery Power is reported by 4 Levels: 100%/ 80%/ 50%/ 30%.
Note: When the battery capacity is low, it will notify you every 15 seconds, and it will automatically shut down after 3 prompts, or it will automatically shut down after two consecutive prompts.
Battery Charge
Supports PD fast charge 5V/2A, 5V/3A, maximum power input 15W. PD high voltage fast charge is not supported. Supports regular charge 5V/1A, 5V/2A, 5V/3A. It takes about 4 hours for a full charge.

Reset
If the system is stuck for some reason and the button function is invalid, you can click the 3.5mm LINE-IN input headphone jack with a small sharp object (Non-metallic object, such as a toothpick, etc.) to reset the system. (As is shown in the picture below)

Bluetooth Mode
Phone Pairing
Step 1: When powered on, the light flashes blue quickly and enters Bluetooth pairing mode.
Step 2: Go to Bluetooth settings on your phone, find the Bluetooth named “LOUDLID”.
Step 3: Click the Bluetooth “LOUDLID” to connect, the device will report “pairing successful” and the light will blink blue slowly which indicates the connection is complete.
Note: For a slave speaker in Audio Sharing mode, you cannot pair it with a mobile phone, you need to double-click the light button to switch back to Bluetooth mode first.
Mobile Phone Bluetooth Connection
With Bluetooth on in your mobile phone, the LOUDLID will automatically connect to the last two successfully connected phones.
Clear Bluetooth Pairing
Press and hold the Previous and Next Buttons for 3 seconds to clear all Bluetooth pairing history and enter new Bluetooth pairing mode at the same time, the indicator light will flash blue quickly.
Step 1: Mobile phone A- Connect the LOUDLID using the steps shown above (Phone pairing).
Step 2: Double-click the Power Button on LOUDLID to enter a new pairing mode and it will disconnect with the last connected mobile phone(A). Use Mobile phone B to connect to LOUDLID as the above steps (Phone pairing).
Step 3: LOUDLID is on the Bluetooth list of Mobile phone A, just click it to reconnect.
Step 4: After the two mobile phones are both paired and connected successfully, the LOUDLID will automatically reconnect to both phones after powering on again.
Note: The mobile phone which opens the player first would be given priority to play audio when the two mobile phones connect LOUDLID at the same time. To play the audio of another phone, pause the first phone’s music.
Host and Slave Device Pairing
Step 1; Device A with the mobile phone connected, double-click the LED Light Button, the green light flashes quickly, and the voice prompt “Sharing mode on”; With device B turned on and without the mobile phone connected, double- click the LED Light Button, the green light flashes quickly, and the voice prompt “Sharing mode on”;

Device A (With the phone connected) Device B (Without the phone connected )Double-click the LED Light Button,
Double-click theLED Light Button, green light flashes
quickly, voice green light flashes  uickly, voice prompt
“Sharing mode on”| Device B (Without phone connected)
Double-click the LED Light Button, Double-click the LED Light Button
,green light flashes quickly, voice  reen light flashes quickly, voice prompt ”
Sharing mode on” prompt “Sharing mode on” Step 2: After device A and device B are successfully paired, the indicator light of

Step 2: After device A and device B are successfully paired, the indicator light of device A flashes blue slowly;
After device B and device A are successfully paired, device B prompt “Slave speaker connected”, and the indicator light flashes slowly in blue.

Device A(Connected) Device B(Connected)
LED Light flashes blue slowly| LED Light flashes blue slowly, voice prompt “Slave
speaker connected”

With the host device in music-sharing mode and music playing, the user can add unlimited LOUDLID devices to play the same audio from the host device.
Note: If the device shuts down in music-sharing mode, the device will remember this setting. When the device is turned on again, the host device will prompt “Main speaker mode”, the LED flashes green quickly; the slave device will prompt “Slave speaker mode”, the LED flashes green quickly. After power on, the host and slave device will be connected automatically. To resume individual Bluetooth pairing mode, you need to manually double-click the LED Light Button.
Device Control in Music Sharing Mode
Host Device: You can control music play/pause/track/volume on the host device, it will sync to all the connected slave devices simultaneously. If the host device is shut down, and all other slave devices will enter sharing mode pairing state.
Slave Device: The slave device can only control the volume, exit the music-sharing mode, and shut down. These operations will not be synced to the host device. Automatic Reconnect in Music Sharing Mode The host and slave device will be disconnected beyond the effective range, they will automatically reconnect again when they return to the effective range. Exit Music Sharing Mode Double-click the LED Light Button on the host or slave device to exit. Firmware Upgrade The LOUDLID device firmware can be  upgraded through the USB C port by using a dedicated USB C data cable.

Technical Information

• Bluetooth Version: 5.0
• Effective Connection Range: 2 10 meters
• Rated power output: 20W
• SNR: 285dB
• Sound Input: Bluetooth, Line_in
• Class D Digital Amplifier: 2 X 10W
• Frequency Response Range: 70 Hz ~ 18000 Hz
• Input Power: DC 5V/3A
• Input Power Interface: USB-C
• Battery Capacity: 5000mAh/7.4V
• Product Net Weight: 0.97KG
• Product Size (WHD): 22 X 15 X16CM

Troubleshooting

sufficient.
2. The battery may be in protection mode or the battery is completely discharged, please charge the device.
3. Please make sure that the power on the operation is completely correct.
No Sound| 1. Please check whether the power of the speaker device is sufficient;
2. The battery may be in protection mode or the battery is completely discharged, please charge the device in time;
3. Please make sure that the power on the operation is completely correct.
Unable To Connect Or Pair With Bluetooth  evice| 1. Please check if the speaker device is in Bluetooth pairing mode.
2. Please check whether the Bluetooth option of the mobile phone has been turned on.
Sound Distorted Or Cut In And Out| 1. Please confirm whether the audio file is damaged and try to switch to another music source.
2. Keep away from high-power electronic interference sources.
3. Whether the distance between the speaker and the mobile phone is more than 10 meters.

Maintenance and Care

Please read and follow all safety and usage instructions For more information on the LOUDLID Bluetooth speakers, please refer to the user guide. Important Safety Instructions

1. Do not place the speaker device near any heat sources, such as radiators, heat regulators, stoves, or other devices (including amplifiers) that generate heat.
2. Only use attachments/accessories specified by the manufacturer.
3. Please cut off the power of this device in thunderstorm days or when it is not used for a long time. 4. For any maintenance matters, please consult the after-sales customer service of the merchant. It should be repaired in time if there is any damage to the speaker device, such as a damaged power cord or damaged plug, objects falling into the device, unable to function properly, or being dropped.

Warning/Caution

This symbol indicates that there is hazardous uninsulated A voltage within the product shell, which may present a risk of electric shock.
This symbol indicates that there are important operating and maintenance instructions in the product guide.
This product contains magnetic material. If this product is suspected to affect the operation of implanted medical devices, please consult your doctor.
Please place this product away from fire and heat sources.
Do not place flame sources (such as lighted candles) on this product or near this product. Do not modify this product without authorization.
 Do not use this product with a power inverter. & This product uses only the included power supply.
Do not overheat the battery provided in this product. (eg: avoid sun exposure and keep away from fire, etc.)
Please dispose the used batteries correctly and follow the local regulations. Do not incinerate it.
This symbol indicates that this product must not be discarded as household waste and must be sent to the relevant recycling department for recycling. mam §=Proper disposal and recycling of waste helps protect natural resources, human health and the natural environment. For more information of disposing and recycling of this product, please contact your local civil affairs department, waste disposal service agent, or the store that sold this product. Removal of the rechargeable lithium-ion battery in this product must be done by a professional.

**Warranty

**

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Lexin Electronics Inc.
Company name: Lexin Electronics Inc.
Address : 3303 Harbor Blvd Suite E6,Costa,Mesa,CA 92626,USA
BRIA (C00) ess YZ] E-mail : tech@lexinmotorcycle.com
2-year warranty:www.lexin-moto.com
support:  tech@lexinmotorcycle.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>