LEXIN P5 Tire Inflator Portable Air Compressor User Guide
- June 14, 2024
- LEXIN
Table of Contents
LEXIN P5 Tire Inflator Portable Air Compressor
LX-SMART PUMP P5 USER GUIDE
Product Information
- Product Model: PS Smart Air Pump
- Battery Capacity: 3.7V/5000mAh
- USB-C Input : 5V/2A
- USB-A Output: 5V/2A
- Battery Power: 18.5Wh/7.4V
- Pressure: 2 ~ 150PSI / 0.1 ~ 10.3BAR
- Working Temperature:- 10 – 45°C
- Product Net Weight : 500
- G Product Size : 162.5’68″38MM
Product Packaging
- Smart Air Pump
- Presta Valve Adapter
- Packaging
- Valve Needle for Balls
- USB-C Charging Cable
- American Style Quick Connect Trachea
- Storage Bag
- User Guide
Function Introduction
Basic Operation
Power On/Off
- Power On : Press and hold the power button for 3 seconds to turn on the air pump.
- Power Off : Press and hold the power button for 3 seconds to turn off the air pump.
Method of Pumping
In the power-on state, short press the power button to start inflate, and it
will automatically stop inflating when the preset air pressure value is
reached.
Battery Indicator
Different colors of the battery indicator show different battery levels
- Green : 65%~ 100%;
- Yellow: 25%~65%;
- Red: 10%~25%
- Red Flash : below 10% (Low battery alert, please charge it to use again.)
Charging Method
USB-C charging input 5V/2A, please use a charging cable and connect it with
the power adapter to charge the air pump.
Battery indicator when charging
- FLashe green light: Charging
- Keep green light on : Fully charged
Note : The air pump cannot be used during
Air Pressure Unit Switching
Short press the U icon, the air pressure display unit can be switched.
- Unit conversion formula: lBAR = 14.SPSI
LED Light
Press and hold the button until the LED light turn on, and long press it again
to turn off.
Preset Air Pressure
- Short press the+/-button : Adjust the preset air pressure value O.SPSI per press.
- Long press+/-button : You can quickly adjust the preset air pressure value.
- The device will automatically save the scene mode and the preset air
- Note : pressure value. The next time you use it, you only need to switch the scene, and the preset air pressure value wlll be automatically set.
Check The Air Pressure
With air pump in standby status, after the trachea is connected to the air
pressure detection object, the upper half of the air pump display screen is
the present measured air pressure value.
Pressure Reset
After power on, the trachea is not connected to the inflatable object. When
the measured pressure value is not 0.0, press the+ and- button at the same
time for 2 seconds, and it will return to normal after all lights of the
display screen are on.
Note: The default air pressure value of this product has been reset into zero. Due to the difference in altitude or sensor, when the measured air pressure value is not zero, manual reset can improve the air pressure accuracy. Calibration is not recommended at high temperatures.
Application Scene Switching
Short press the button to select 5 inflatable scene modes, they are
Verify Inflating Pressure
To ensure safety, please check the inflation pressure required by the inflated
item according to their instruction manual before inflating, to avoid personal
injury from explosion caused by excessive inflation.
Car Tires
The pressure range of the car’s tires is marked on one side of the tire. The
inflation pressure will be related to the load weight, for more detailed air
pressure recommendations, please refer to the manual of the relevant vehicle.
Motorcycle Tires
The pressure range of motorcycle tires is marked on the side of the tire. The
inflation pressure is related to the load weight, for more detailed air
pressure recommendations, please refer to the manual of the relevant vehicle.
Bicycle Tires
The pressure range of a bicycle tires is marked on the side of the tire. The
inflation pressure is related to the load weight, for more detailed air
pressure recommendations, please refer to the manual of the relevant vehicle.
Balls
The inflation pressure of football, basketball, volleyball and other kinds of
balls is marked around the gas-filled pore. The inflation pressure is related
to the load weight. For more detailed air pressure recommendations, please
refer to the manual of the relevant ball.
Connect The Air Trachea to The Air Valve
Schrader Valves
Mountain bikes, electric bikes, motorcycles, and motor vehicles will be
equipped with schrader valves.
Inflation
Connect the schrader valves to the American-style quick-connect trachea to
inflate.
Presta Valves
When inflating road bikes and some of mountain bikes, it will need a presta
valve adapter
- Connect the presta valve adapter to the schrader valves of the high pressure air trachea
- Unscrew the cap of the presta valve.
- Connect the presta valve to the adapter to inflate.
Ball Valves
Ball valves are needed when inflating balls such as basketballs and soccer
balls.
- Inflation: After connect the ball valve with the schrader valves of the air trachea, insert the ball valve into the gas-filled pore on the ball to inflate.
Power Bank
The battery capacity of the smart air pump is 5000mAh, and the 5V/2A USB-A
output interface can be used to charge electronic devices such as mobile
phones.
Note: Inflation and charging cannot be performed at the same time.
Air Pressure Values of Common Articles
Attentive
- Do not leave during inflation.
- Please do not place the air pump near inflammable and explosive materials.
- Try to avoid sand invasion and falling.
- Do not place the product in a place that is too cold, too hot, or humid.
- This product equipped with built-in lithium battery, it is forbidden to throw it into the fire or discard it at will.
- Keep this product out of the reach of children.
High Temperature Safety Precautions
When the trachea is unscrewed, the trachea and the trachea joint will generate
high temperature due to long-time works, so please do not touch it with your
hands for a long time.
Troubleshooting
- 1L(e8x0in0 )E 3le8c0t ro- 8n2i4c8s Inc.
- WVWJ.lexin-moto.com
- Backed by 2-YearWarranty
- For technical support [email protected]