tp-link tapo C425 KIT Solar Powered Security Camera Kit User Guide

: July 9, 2024
: tp-link

Table of Contents

tp-link tapo C425 KIT Solar Powered Security Camera Kit
Product Information
Product Usage Instructions
Safety Information
Charge the Battery
Set-Up
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link tapo C425 KIT Solar Powered Security Camera Kit

Product Information

Specifications

Solar-Powered Security Camera Kit
5V/2A charging
Full charge time: 5.5 hours
For more details, visit FAQ page

Product Usage Instructions

Charging the Battery

Ensure the battery is fully charged before use.
Use a 5V/2A charger for charging.
Check the battery status in the Tapo app after setup.

Setting Up the Camera Kit

Download the Tapo app from the App Store or Google Play.
Press and hold the power button on the camera for about 3 seconds to turn it on.
In the app, select your camera model and follow the app instructions to complete setup.

Connecting Solar Panel to Camera
For detailed instructions on connecting the solar panel to the camera, please refer to this link.

FAQ

Q: How long does it take to fully charge the battery?
A: The battery takes approximately 5.5 hours to fully charge.
Q: Where can I check the battery status after setup?
A: You can check the battery status in the Tapo app after completing the setup process.

Safety Information

For Camera:

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
Adapter shall be easily accessible.

CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

For Solar Panel

Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Avoid scratching and hitting the surface of the solar panel during use.
Avoid contact with highly corrosive substances during use.
The suitable temperature for Tapo A201 and accessories is -20°C~45°C. The working temperature range for battery charging should be maintained at 0°C~45°C.
Make sure the USB connector is fully plugged into your Tapo device.
Make sure you follow the user manual to install the solar panel correctly.
Make sure the waterproof gasket and other accessories can protect the connectors on your Tapo device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Note: Images may differ from the actual products.

Charge the Battery

Fully charge the battery before use.

Connect Solar Panel to Camera
For detailed instructions, please refer to https://www.tp- link.com/support/faq/3800/

Set-Up

Get the Tapo app from the App Store or Google Play.
Press and hold the power button on your camera for about 3 seconds to turn it on.
Tap the button in the app and select your camera model. Follow app instructions to complete setup.

Setup Video
Scan QR code or visit: https://www.tp-link.com/support/setup-video/#cloud- cameras

Mount the Camera Kit After Setup

For Camera:
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations

The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.

For Solar Panel:
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations