Kramer 2900-301771QS KC Virtual Brain 5 User Guide

Kramer 2900-301771QS KC Virtual Brain 5

Product Information

Specifications

• Model: KC-Virtual Brain5
• Power Supply: 12V DC
• Connectivity: HDMI, RJ-45, USB 3.0, USB 2.0, Micro SD Card Slot
• Mounting: VESA mounting bracket
• Locking Mechanism: Lock Anchor

Product Usage Instructions

Step 1: Check what’s in the box
Ensure you have received the following items:

• KC-Virtual Brain5 Control Server
• Power supply (12V DC) with adapters for US, UK, and EU
• VESA mounting bracket and screw set
• Quick start guide

Step 2: Get to know your KC-Virtual Brain5
Get familiar with the various features and functions of your device as listed in the user manual.

Step 3: Mount KC-Virtual Brain5
Install the KC-Virtual Brain5 using the provided VESA mounting bracket or other suitable methods.

Step 4: Connect inputs and outputs
Connect your input and output devices to the corresponding ports on the KC- Virtual Brain5. Use recommended Kramer cables for optimal performance.

Step 5: Connect the power
Plug the power cord into the KC-Virtual Brain5 and then connect it to a power source.

Step 6: Operate KC-Virtual Brain5

1. Open the KC/Brain UI and follow the on-screen instructions.
2. Navigate to the Services tab and click Install to update the brain version and start the services.
3. Configure network settings under Settings > Network.
4. Provision a Brain to a space by selecting a brain instance and configuring it accordingly.

FAQ

• Q: Where can I find the latest user manual for KC-Virtual Brain5?
  A: You can download the latest user manual from https://www.kramerav.com/product/KCVirtualBrain5.

• Q: What should I do if I encounter difficulties during the initial setup?
  A: If you face any issues during setup, refer to the user manual or contact customer support for assistance.

This guide helps you install and use your KC-Virtual Brain5 for the first time.
Go to http://www.kramerav.com/downloads/KC-VirtualBrain5 to download the latest user manual and check if firmware upgrades are available.

What’s in the box

• KC-Virtual Brain5 Control Server
• 1 VESA mounting bracket
• 1 Quick start guide
• 1 Power supply (12V DC) with adapters for US, UK, and EU
• 1 VESA screw set

Get to know your KC-Virtual Brain5

and a mouse.
7| USB 2.0 Connector| Connect to a USB device, for example, a keyboard or mouse.
8| Micro SD Card Slot| Not in use.
9| N/A|
10| Lock Anchor| Use to lock the device to the desk.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Mount KC-Virtual Brain5

Install KC-Virtual Brain5 using one of the following methods:

• Place KC-Virtual Brain5 on a flat surface.
• When mounting on a wall, install the VESA mounting plate with 4 screws, insert the 2 hand-tightened screws into the bottom of the device, and mount the device on the mounting plate using the 2 screws.
  • Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible with the device.
  • Avoid uneven mechanical loading.
  • Appropriate consideration of equipment nameplate ratings should be used to avoid circuit overloading.
  • Reliable earthing of rack-mounted equipment should be maintained.
  • The maximum mounting height for the device is 2 meters.

Connect inputs and outputs

If direct connectivity to KC-Virtual Brain5 is required, connect the device as shown below.
Always switch off each device’s power before connecting it to your KC-Virtual Brain5.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/KC- VirtualBrain5. Using third- party cables may cause damage!

Connect the power

Connect the power cord to KC-Virtual Brain5 and plug it into the mains electricity. Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
• There are no operator-serviceable parts inside the unit.

Warning:

• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing it.

Knowledge of IP networking is required to perform the following procedure. Inaccurate IP calculation could damage your IP network when you start KC- Virtual Brain5.
DHCP server is recommended. You may need to contact your IT manager to get the IP of your brain.

Operate KC-Virtual Brain5

To operate KC-Virtual Brain5:

1. Open a browser and enter Brain in the URL.

2. Login in using the username and password (Default kramer/kramer – the password can be changed).

3. When opening a KC/Brain UI for the first time you will see this screen showing 0/0 docker services.

4. Navigate to the Services tab on the left.

5. Click Install, this will download and install the latest brain version on the unit and start the Brain services based on the number of licenses on the device (5 for KC-Virtual Brain5).

6. Table data regarding the Brains, shows that the Brains have been succesfully installed.
   The buttons on the right allows you to manage individual services independently of each other and the host, please refer to the user manual for more information.

7. Network configuration can be found under Settings > Network.

8. To provision one of the five Brains to a space, navigate to Brain Info, select a brain instance and then click Configuration. For more information, please refer to the User Manual for KC-Virtual Brain5 at https://www.kramerav.com/product/KC-VirtualBrain5.

kramerav.com

References

• Kramer | Audio-Visual Solutions and Experiences
• Kramer | Audio-Visual Solutions and Experiences
• No resources found

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>