ikan SE65Z-CW Stryder Mini Zoom 65W Ellipsoidal LED Light User Guide
- July 7, 2024
- ikan
Table of Contents
ikan SE65Z-CW Stryder Mini Zoom 65W Ellipsoidal LED Light
What’s Included:
- 1x Ellipsoidal Zoom
- 1x Gobo Frame
- 1x Gel Holder
- 1x Power Cord
- 1x Power Plug
- 1x User Manual
Introduction
Designed with energy saving and environmental protection in mind, this device features low power consumption and highly efficient LEDs. The housing is made from new high-strength, heat-resistant engineering plastics, offering a sleek and elegant appearance. Both the design and manufacturing processes adhere to IEC standards. This device is ideal for use in exhibition halls, museums, theaters, and performance venues. It fully complies with the international DMX512 standard, allowing for both individual and multi-unitcontrol.
Specifications
- Power Supply: AC100V-240V,50HZ/60HZ
- Power Consumption: 65W
- Lamp: LED SOW white
- Color temperature: 5600K
- CRI: 95
- LED life: >50000H
- Environmental Temperature: -68~113°F (-20~45°C) Adjustable Beam Angle: 19-36
- Weight: 4 lbs (1.8 kg)
- Dimensions: 15×7.7×7.7 in (380x195x195 mm)
Photometrics
Safety
- User must follow the instructions of this manual
- Make sure the power switch is off, the power plug, outlet and the earth conection is in well condiction before connecting the device with the mains.
- Always disconnect from the mains, when the device is on installation and dismantled.
- The minimum distance between light-output and the illuminated surface should be 50cm (20in.)
- In order to safeguard sufficient ventilation, leave 50 cm of free space around the device. Please note that heat -sensitive objects may be deformed or damaged by the emitted heat.
- During the operation the housing may become hot to touch. Ensure light cools down before handling.
- For indoors use.
Daisy Chain Power
AC100V-240V, 50Hz/60Hz
For daisy-chaining power between lights, use a power line with the
specification 3G0.75 and a maximum current of 5A. When the power supply is
200V-240V, use the grey plug for power interconnection on the device, ensuring
that each group does not exceed 14 connected devices. For power supplies of
100V-120V, limit each interconnection to a maximum of 7 connected devices.
Additionally, when using the included adapter plug, be sure to connect each
pin correctly to ensure proper functionality and safety.
Pin Connections for Dairy Chain
- Pin 1 of power plug connects the “L” of power-cord
- Pin 2 of power plug connects the “N” of power-cord
- Pin 3 of power plug connects the “GN” of the power-cord
Using the Gel Frame
Using the Gobo Frame
Focus and Zoom Control Knobs
DMX Control Box
DMX Protocol
DMX Priority
The light fixutruing dimming has DMX512 signal priority. When DMX512 signal is
detected the light can only be controlled by DMX. To restore manual control
disconnect DMX.
Control Settings
DMX Address:
- The default DMX address is 001 indicated on screen by [A 001]
- To adjust DMX address press the Enter button on DMX address [A 001]. Use the Up or Down buttons to change DMX address. Press Enter to confirm or Esc to cancel.
Master/Follow Mode
- Each light is set default Master [NAST] [ON] to allow for individual controls. To turn a light to follow mode select [NAST] press Enter button and use the Up or Down buttons to select [OFF] and press Enter.
- DMX cable needs to link the master and follow light.
Scenes
- Available scenes: Strobe[Sc00], Fade In[Sc01], Fade Out[Sc02], Random To change scenes select [DENO] press enter button to navigate between [Sc00-02].
- Different scenes can be also be controlled by DMX (see DMX Protocol).
Manual Controls
- This function is only available when DMX512 signal is not present.
- Select [U000] press Enter button and use Up or Down to select the intensity from 1 – 255.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>