Ikan M19W 19 High Bright Teleprompter LED Widescreen Monitor User Guide

Ikan M19W 19 High Bright Teleprompter LED Widescreen Monitor

Specifications

• Model: M19W
• Aspect Ratio: Widescreen
• Brightness: High-bright LED
• Diagonal: 19 inches
• Input Signal: SDI, HDMI
• Input Voltage: [Provide voltage range]
• Power Consumption: [Provide power consumption]
• Product Weight: [Provide weight]
• Product Dimensions: [Provide dimensions]
• Native Resolution: [Provide resolution]
• Shipping Weight: [Provide weight]
• Shipping Dimensions: [Provide dimensions]
• Viewing Angle: [Provide angle]
• Build Material: [Provide material]
• TallyInterface: [Provide interface]
• UPC: [Provide UPC]

Product Usage Instructions

Monitor Ports
The monitor comes with HDMI port for connectivity.

Monitor Menu Settings
You can access the menu settings by pressing the MENU button on the monitor.

Setting up FLIP Button Feature:

1. Press the MENU button.
2. Navigate to SYSTEM CONFIG.
3. Navigate to FLIP-V or FLIP-H.
4. Change FLIP-V and/or FLIP-H to ON.
5. Exit MENU.
6. The FLIP button should now be activated and can be pressed to mirror the image Horizontally or Vertically.
7. When FLIP-H is ON, the image will flip Horizontally.
8. When FLIP-V is ON, the image will flip Vertically.
9. If both are ON, the FLIP button will toggle both Horizontal and Vertical flip.

FAQ

Q: What video signals are supported by the monitor?
A: The monitor supports SDI and HDMI video signals with various resolutions and refresh rates.

Q: How do I connect the tally light pins?
A: Connect the GND pin to the ground, R to red tally light, G to green tally light, Y to yellow tally light, and disregard NC pins.

Q: Where can I find more information and support for the product?
A: You can visit the official website at www.ikancorp.com for dynamic information or contact support@ikancorp.com for assistance.

What’s Included

• 1 x SDI Widescreen Teleprompter Monitor w/ Built-in Tally Light
• 1 x Power Adapter with Cable

Monitor Ports

• 3G-SDI – Serial Digital Interface Connection

• VGA – Video Graphics Array DE15 Connection

• HDMI – High-Definition Multimedia Interface Input Connection

• Power Port – 12-24v Input

• HDMI – Switch HDMI input

• VGA – Switch to VGA input

• SDI – Switch to 3G-SDI input

• Flip – Toggle image flip

• (Can be set to horizontal, vertical, or both via menu)

• Up Arrow – Toggle up to adjust setting

• Menu – Access to monitor settings

• Down Arrow – Toggle down to adjust setting

Monitor Menu Settings

• Video Config
  • Contrast (White Level)
  • Brightness (Black Level)
  • Tint (Chroma Hue)
  • Chroma (Chroma Saturation)
  • Sharpness (Detail)
  • RGB Setup – Manually configure RGB
  • Return
• System Config
  • Menu Duration – Set duration of how long menu stays on screen
  • Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is native resolution, 16:9 will create black bars)
  • Flip-H – Assign toggle button to flip image horizontally
  • Flip-V – Assign toggle button to flip image vertically
  • Reset – Factory reset
  • Return
• PC Setup (Only available for VGA)
  • H-Position – Adjust horizontal position
  • V-Position – Adjust vertical position
  • Auto – Monitor automatically adjust position
  • Return
• Exit

How to set-up FLIP button feature

1. Press MENU button
2. Navigate to SYSTEM CONFIG.
3. Navigate to FLIP-V or FLIP-H
4. Change FLIP-V and/or FLIP-H to “ON”
5. Exit MENU
6. The FLIP button should now be activated and can be pressed to mirror the image Horizontally or Vertically
7. When FLIP-H is ON, the image will flip Horizontally
8. When FLIP-V is ON, the image will flip Vertically
9. If both are ON, the FLIP button will toggle both Horizontal and Vertical flip

 Specifications

M19W
19″ High-bright Teleprompter LED Widescreen Monitor w/ Tally

Supported Video Signals

SDI

• 720x480i @ 59.94, 60 Hz
• 720x576i @ 50 Hz
• 1280x720p @ 50, 60 Hz
• 1920x1080i @ 50, 59.94, 60 Hz
• 1920x1080psf @ 24, 25, 29.97, 30 Hz
• 1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz

HDMI

• 720x480i & 720x480p @ 59.94, 60 Hz
• 720x576i & 720x576p @ 50 Hz
• 1280x720p @ 50, 59.94, 60 Hz
• 1920x1080i @ 50, 59.94, 60 Hz
• 1920x1080psf @ 24, 25, 29.97, 30 Hz
• 1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz

Pinout Diagram for Tally Light

Tally Light Pinout:

• GND: Connects to the ground of the device or system.
• R: Connects the red tally light
• G: Connects the green tally light
• Y: Connects the yellow tally light
• NC: Stands for “Not Connected” Disregard these pins.

Learn More
More dynamic information at official website: www.ikancorp.com

Support
Contact email: support@ikancorp.com

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.

Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.

©2021 Ikan International. All rights reserved.

www.ikancorp.com
1.713.272.8822

sales@ikancorp.com

because we’re filmmakers too

References

• Professional Video Production Equipment for Sale | Ikan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>