ikan HS-PT700-UGK HomeStream Teleprompter Upgrade Kit wirth 7-Inch Monitor User Guide
- June 6, 2024
- ikan
Table of Contents
Quick Start Guide
HS-PT700-UK
HomeStream Teleprompter Upgrade Kit w/ 7” Monitor, Elite Remote, and
PrompterPro 4
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
What’s Included
1 x 7” Monitor
1 x Mini-HDMI to HDMI Cable
1 x Micro-USB Cable with Power Adapter
1 x Elite Remote
1 x PrompterPro4
Installation Steps (DSLR or Mirrorless Camera)
1. Remove the rear cover of the teleprompter
2. If using a phone, attach a clamp small side up. If using a monitor, use a
larger adjustment side. 
3. Install the lens adapter by screwing it into your lens. Make sure the
adapter is screwed on completely.
4. Install the teleprompter by
sliding it over the ring adapter
5. Place either monitor or smartphone on the clamp
Installation Steps (Smartphone as Camera)
1. Remove the front and rear cover of the teleprompter
2. Install the adapter ring with foam on the adapter
3. If using a phone, attach a clamp small side up. If using a monitor, use a larger adjustment side.
4. Unscrew the knob from the smartphone holder. A smartphone holder can be installed on either side depending on your preference. To record horizontal footage install the smartphone holder vertically. To record vertical footage install the smartphone holder horizontally.
5. Remove the protective cover of the teleprompter
6. Based on the camera of your smartphone place one of the two foam rings into the adapter ring
7. Attach the phone to the smartphone holder. Foam the ring may need to be rotated and adjusted for various smartphone camera locations
8. Place either monitor or smartphone on the clamp
HOME STREAM Bluetooth Remote Controller
(For HomeStream Teleprompter App Only)
Instructions
- Power On: Hold down the power button for 2 seconds LED light will come on.
- Power Off: Hold down the power button for 5 seconds LED light will turn off.
- Pairing Remote: Once the remote is turned on it will be placed in auto pair mode. In your phone’s Bluetooth settings locate the HOME STREAM remote to pair. If you want to pair to a different/new device turn off the remote. Hold down the power button for 8 seconds and the LED light should blink indicating the remote is in pairing mode.
- Power Saving Feature: If the remote is not paired to a device, it will turn off after being idle for 5 minutes. If the remote is connected to a device, it will turn off after being idle for 30 minutes.
DISCLAIMER
HomeStream remote only works with iOS or Android; Does not work with Windows
or macOS.
ELITE-REMOTE
For PrompterPro4 compatible with Windows or macOS
Pairing Instructions
- Turn on the remote by inserting 2 AAA batteries in the battery compartment.
- Press and hold the “Slow Down Prompt & Speed Up Prompt” buttons for 3 seconds. The LED indicator should rapidly blink blue.
- Select Elite RC on your computer to pair.
HOME STREAM Telepromper App
The Home stream teleprompter app can be found by searching in either the iOS App Store or the Android Play Store for “HomeStream Teleprompter”
Learn More
More dynamic information at the official website: www.ikancorp.com
Support
Contact email: support@ikancorp.com
CONDITIONS OF WARRANTY SERVICE
-
Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
-
The components and maintenance service fee will be charged if the warranty period is expired.
*Free Service will not be provided in the Following Situations: (Even if the product is still within the warranty period.)** -
Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
-
Damage caused by natural disasters, abnormal voltage, and environmental factors, etc.
©2021 Ikan International. All rights reserved.
www.ikancorp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>