ikan PT-ELITE-PRO2-CVK Conversion Kit from Tablet to Traditional Teleprompter User Guide
- June 6, 2024
- ikan
Table of Contents
ikan PT-ELITE-PRO2-CVK Conversion Kit from Tablet to Traditional
Teleprompter
Teleprompter Assembly
Step 1
Unscrew and remove the tablet holder and tablet adapter of your PT-ELITE-PRO2.
Step 2
Attach the two 15mm rod monitor adapters to back of the monitor’s VESA mounts
with the 4 screws using the smaller hex key.
Step 3
Using the larger hex key loosen the rod clamps.
Step 4
On the teleprompter, base loosen the top 4 screws holding the rods in place.
Step 5
After loosening the following two screws on the base pull the rods out to
accommodate the monitor. Tighten all 6 screws after rods are extended.
Step 6
After tightening the rods, slide the monitor into the teleprompter base. Leave
slight room for the teleprompter bracket and glass to slide in.
Monitor Ports
- BNC – AV Composite Input
- VGA – Video Graphics Array DE15 Connection
- HDMI – High-Definition Multimedia Interface Input Connection Power Port – 12-24v Input
HDMI – Switch HDMI input VGA – Switch to VGA input
AV – Switch to composite BNC input
Flip – Toggle image flip
(Can be set to horizontal, vertical, or both via menu) Up Arrow – Toggle up to
adjust setting
Menu – Access to monitor settings
Down Arrow – Toggle down to adjust setting
Monitor Menu Settings
Video Config
- Contrast (White Level)
- Brightness (Black Level)
- Tint (Chroma Hue)
- Chroma (Chroma Saturation) Sharpness (Detail)
- RGB Setup – Manually configure RGB Return
System Config
- Menu Duration – Set duration of how long menu stays on screen
- Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is native resolution, 16:9 will create black bars)
- Flip-H – Assign toggle button to flip image horizontally Flip-V – Assign toggle button to flip image vertically
- Reset – Factory reset Return PC Setup (Only available for VGA)
- H-Position – Adjust horizontal position
- V-Position – Adjust vertical position
- Auto – Monitor automatically adjust position Return Exit
How to set up FLIP button feature:
- Press MENU button
- Navigate to SYSTEM CONFIG.
- Navigate to FLIP-V or FLIP-H
- Change FLIP-V and/or FLIP-H to “ON”
- Exit MENU
- The FLIP button should now be activated and can be pressed to mirror the image Horizontally or Vertically
- When FLIP-H is ON, the image will flip Horizontally
- When FLIP-V is ON, the image will flip Vertically
- If both are ON, the FLIP button will toggle both Horizontal and Vertical flip
Specifications
| Aspect Ratio | 4:3 |
|---|---|
| Brightness | 350 cd/m2 |
| Build Material | Aluminum / Steel |
| Contrast Ratio | 500:1 |
| Input Signal | Composite BNC, VGA, HDMI |
| Reading Range | 13 ft. |
| Resolution | 1024 x 768 |
| Screen Size | 12 in. |
| Viewing Angle | 160 degrees (horizontal/vertical) |
Features
- Includes 12” monitor that supports image flip (vertical and horizontal)
- High-quality American made 70/30 beam splitter glass
- Screen readable from up to 13’
- Works with many different sized camera
- Easy balancing with adjustable base
- Perfect size for portability and view-ability
- Ships in Reusable Foam for Easy Transport
- Includes MAC and PC Software
- HDMI, VGA, and Composite BNC
Learn More
More dynamic information at official website:
www.ikancorp.com
Support
Contact email: support@ikancorp.com
CONDITIONS OF WARRANTY SERVICE
- Free service for one year from the day of purchase if the problem is caused by manu-facturing errors.
- The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(Even if the product is still within the warranty period.)
- Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
- Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2020 Ikan International. All rights reserved.