Synology RS1619xs+ RackStation Hardware User Manual

: July 6, 2024
: Synology

Table of Contents

Synology RS1619xs+ RackStation Hardware User Manual
Before You Start
System Fans
Hardware Setup
Chapter 2: Hardware Setup
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Synology RS1619xs+ RackStation Hardware User Manual

Before You Start

Thank you for purchasing this Synology product! Before setting up your new RackStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your RackStation.
Note: All images below are for illustrative purposes only, and may differ from the actual product.

Package Contents

Synology RackStation at a Glance

No.	Article Name	Location	Description
1	Power Indicator	****

Front

| Displays power status of the RackStation. For more information, see “Appendix B: LED Indicator Table“.

| ****

Power Button

| 1. Press to power on the RackStation.

2. To power off the RackStation, press and hold until you hear a beep

sound and the Power LED starts blinking.

Back

| ****

RESET Button

| 1. Press and hold until you hear a beep sound to restore the default IP address, DNS server, and password for the admin account.1

2. Press and hold until you hear a beep sound, then press and hold again until you hear three beep sounds to return the RackStation to “Not Installed” status so that DiskStation Manager (DSM) can be reinstalled.

You can keep the current admin password unchanged by ticking the “Keep current admin password unchanged” checkbox in DSM Control Panel > Update & Restore > Reset.
For more information about the Synology Expansion Unit supported by your RackStation, please visit www.synology.com.

System Fans

If any fan failure occurs, please refer to the images below to locate the failed fan(s) indicated in DSM. The fans are numbered as below:
To replace the failed fan(s), please contact Synology Technical Support at www.synology.com/support for technical assistance.

Safety Instructions

Hardware Setup

Tools and Parts for Drive Installation

A screwdriver.
At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning
If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up important data before installation.

Install Rack mounts
Fix the two rack mount kits on both sides with the screws provided.

install Drives

Pull the drive tray handle outwards to remove the tray.
Load drives into the drive trays.
- For 3.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten the screws into the four spots indicated below to secure the drive.
- For 2.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten the screws into the four spots indicated below to secure the drive.
Insert the loaded drive tray into the empty drive bay.
Important: Make sure the drive tray is pushed in or the drive may not function properly.
Push the handle inward to secure the drive tray.
Insert the drive tray key into the drive tray lock, turn the key clockwise to lock the handle of the drive tray, and remove the key.
Repeat the steps above to install all prepared drives.
Drives are numbered as shown below.
Note: If you want to create a RAID volume, we recommend installing drives of the same size. This would optimize drive capacity usage.

Add RAM Modules to RackStation
The optional Synology RAM module is designed for RackStation memory expansion. Follow the steps below to install, check, or remove a RAM module on your RackStation

To install a RAM module

Shut down your RackStation and disconnect all cables to prevent any possible damage.
Remove the top cover:
- Loosen the four screws of the top cover of your RackStation with a screwdriver. The respective screw position is indicated above.
- Push the top cover towards the front of your RackStation and lift it.
  Note: When you remove the top cover, you expose sensitive internal components.
Avoid touching anything other than the memory assembly when you remove or add memory.

White Slots

Black Slots
Note

For normal operations, you must insert your RAM modules into the white slots first.
Synology will not provide a complete product warranty or technical support if non-Synology RAM modules are used for memory upgrades.

Chapter 2: Hardware Setup

Insert the new memory module

Push the retaining clips on the slot outwards.
Align the gold edge of the module with the memory slot.
Firmly push the memory module down. The retaining clips will snap into position if the module is correctly inserted.
Important: Hold the memory module by its edges. Do not touch the golden connectors.

To make sure RackStation recognizes the new memory capacity

Install DiskStation Manager (DSM). (See Install DSM with Web Assistant for more information.)
Log in to DSM as an admin or a user in the administrator’s group.
Check Total Physical Memory in Control Panel > Info Center.
If your RackStation does not recognize the memory or does not start up successfully, confirm that the memory is installed correctly.

To remove a RAM Module

Follow steps 1 and 2 of Add RAM Modules to RackStation to shut down your RackStation. Disconnect all cables and remove the top cover.
Disengage the memory-retaining clips by pushing them outwards. The module will pop out of the slot.
Follow To return the top cover to put back the top cover.

Attach SSDs to RackStation
Your RackStation supports optional M.2 2280 NVMe / SATA SSDs. Follow the steps below to add them to your RackStation.

Follow steps 1 and 2 of Add RAM Modules to RackStation to shut down your RackStation. Disconnect all cables and remove the top cover.
Insert an M.2 SATA SSD into SLOT1 (as shown below). Insert a second SSD in SLOT 2 if needed.
Tighten the SSD(s) with a screw

Important: Hold the SSD module by its edges and do not touch the golden connectors.

Attach A Network Interface Card to RackStation
Your RackStation supports one PCIe x8 add-on network interface card.1

To install a network interface card

Follow steps 1 and 2 of Add RAM Modules to RackStation to shut down your RackStation.
Disconnect all cables and remove the top cover.
Insert your network interface card.
- Lift the black latch from the expansion slot cover. Remove the cover from the expansion slot.
- Align the gold connectors of the network interface card to the expansion slot and firmly insert the card.
- Put the black latch back into the expansion slot to fasten the network interface card.

Note: Make sure the connector is fully inserted or the network interface card may not function properly.

To return the top cover

Align the round dots on the side of the top cover with the slots on the chassis edge, then push the top cover back into position.
Fasten the four removed screws in step 2 To install a RAM module

Replace Redundant Power Supplies on RackStation

Turn to the back of your RackStation and push the lever of the redundant power supply.
Pull the redundant power supply out.
Prepare a new power supply and push it into the slot until you hear a click.

Start-Up RackStation

Turn to the back of your RackStation. Connect one end of each power cord to the power ports and the other end to a power outlet.
Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.
Press the power button to turn on the RackStation.
Congratulations! Your RackStation is now online and detectable from a network computer.

Install DSM on RackStation
after the hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your RackStation.

Install DSM with Web Assistant
Your RackStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your RackStation. To use Web Assistant, please follow the steps below.

Power on your RackStation.
Open a web browser on a computer connected to the same network as the RackStation.
Enter either of the following into the address bar of your browser:
- find.synology.com
- rackstation:5000
Web Assistant will be launched in your web browser. It will search for and find the RackStation within the local network. The status of the RackStation should be Not Installed.
Click Connect to start the setup process and follow the onscreen instructions.

Note

The RackStation must be connected to the Internet to install DSM with Web Assistant.
Suggested browsers: Chrome, Firefox.
Your RackStation and computer must be in the same local network.
If you accidentally leave the installation process before it is finished, log in to the DSM as admin (default administrative account name) with the password left blank.

Learn More
Congratulations! Your RackStation is now ready for action. For more information or online resources about yourRackStation, please visit www.synology.com.

Specifications

Item	RS1619xs+
Compatible Drive Type	•

3.5″/2.5″ SATA x 4

• M.2 2280 NVMe/SATA SSD x 2

Maximum Internal Raw Capacity| • 48 TB (4 x 12 TB HDD)

• 192 TB with RX1217 / RX1217RP (expansion unit) x 1

External Device Port| • USB 3.0 x 2

• Expansion port x 1

• Mac OS x 10.11 onward

File System| • Internal: Btrfs, ext4

• External: Btrfs, ext4, ext3, FAT, NTFS, HFS+, exFAT1

Supported RAID Type

| • Basic • JBOD • RAID 0 • RAID 1

• RAID 5 • RAID 6 • RAID 10• RAID F1

• Synology Hybrid RAID (Up to 2-Disk Fault Tolerance)

Agency Certification| • FCC Class A • CE Class B • BSMI Class A

• EAC • VCCI • RCM• RoHS Compliant

HDD Hibernation| Yes
Scheduled Power On/Off| Yes
Wake on LAN| Yes

Language Localization

| ****

Environment Requirement

| • Line voltage: 100V to 240V AC

• Frequency: 50/60Hz

• Operating Temperature: 40 to 95˚F (5 to 35˚C)

• Storage Temperature: -5 to 140°F (-20 to 60°C)

• Relative Humidity: 5% to 95% RH

Note
Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information.

LED Indicator Table

LED Indicator	Color	Status	Description

Power

| ****

Green

| Static| Powered on
Blinking| Booting up / Shutting down
Off| Powered off

STATUS

| Green| Static| Volume normal

Orange

| ****

Blinking

| Volume degraded / Volume crashed
Volume not created
DSM not installed
Off| HDD hibernation

ALERT

| Orange| Blinking| Fan failure / Over temperature
Off| System normal

Redundant Power

| Green| Static| Power supply is ready
Off| No power supply

Drive Status 1-4

| ****

Green

Rear LAN

(on right side of jack)

Rear LAN

(on left side of jack)

| ****

Green

| Static| Network connected
Blinking| Network active
Off| No network

Note: This table applies to Synology NAS running DSM 6.2.3 and earlier. For DSM 6.2.4 and above, please refer to this article for the latest information.

LED Indicator Table B
Appendix
Please try to restart your RackStation or re-insert the drive(s), and then run the HDD/SSD manufacturer’s diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology Technical Support for help.

SYNOLOGY, INC. END USER LICENSE AGREEMENT
IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT (“EULA”) IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. (“SYNOLOGY”) FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PURCHASED BY YOU (THE “PRODUCT”), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( “SOFTWARE”).

YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY USING THE PRODUCTS CONTAINING THE SOFTWARE AND INSTALLING THE SOFTWARE ONTO THE PRODUCTS OR DEVICE CONNECTED TO THE PRODUCTS. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT USE THE PRODUCTS CONTAINING THE SOFTWARE DOWNLOAD THE SOFTWARE FROM WWW.SYNOLOGY.COM OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY.INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND BY THE RESELLER’S APPLICABLE RETURN POLICY.

Section 1. Limited Software License. Subject to the terms and conditions of this EULA, Synology grants you a limited, nonexclusive, non-transferable, personal license to install, run, and use one copy of the Software loaded on the Product or on your device connected to the Product solely relating to your authorized use of the Product.
Section 2. Documentation. You may make and use a reasonable number of copies of any documentation provided with the Software; provided that such copies will only be used for internal business purposes and are not to be republished or redistributed (either in hard copy or electronic form) to any third party.
Section 3. Backup. You may make a reasonable number of copies of the Software for backup and archival purposes only.
Section 4. Updates. Any software provided to you by Synology or made available on the Synology website at www.synology.com (“Website”) or any other channel provided by Synology that updates or supplements the original Software is governed by this EULA unless separate license terms are provided with such updates or supplements, in which case, such separate terms will govern.
Section 5. License Limitations. The license outlined in Sections 1, 2, and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights concerning the Software. Synology reserves all rights not expressly granted to you in this EULA. Without limiting the foregoing, you shall not authorize or permit any third party to (a) use the Software for any purpose other than that in connection with the Product; (b) license, distribute, lease, rent, lend, transfer, assign, or otherwise dispose of the Software; (c) reverse engineer, decompile, disassemble, or attempt to discover the source code of or any trade secrets related to the Software, except and only to the extent that such conduct is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate, or create any derivative works of the Software; (e) remove, alter, or obscure any copyright notice or other proprietary rights notice on the software or Product; or (f) circumvent or attempt to circumvent any methods employed by Synology to control access to the components, features, or functions of the e Product or Software. Subject to the limitations specified in Section 5, you are not prohibited from providing any services hosted by Synology NAS server to any third party for commercial purposes.
Section 6. Open Source. The Software may contain components licensed to Synology under the GNU General Public License (“GPL Components”), currently available at http://www.gnu.org/licenses/gpl.html. The terms of the GPL will control solely concerning the GPL Components to the extent that this EULA conflicts with the requirements of the GPL concerning your use of the GPL Components, and, in such event, you agree to be bound by the GPL concerning your use of such components.
Section 7. Audit. Synology will have the right to audit your compliance with the terms of this EULA. You agree to grant Synology a right to access your facilities, equipment, books, records, and documents and to otherwise reasonably cooperate with Synology to facilitate any such audit by Synology or its agent authorized by Synology.
Section 8. Ownership. The Software is a valuable property of Synology and its licensors, protected by copyright and other intellectual property laws and treaties. Synology or its licensors own all rights, titles, and interests in and to the Software, including but not limited to copyright and any other intellectual property rights.
Section 9. Limited Warranty. Synology provides a limited warrant that the Software will substantially conform to Synology’s published specifications for the Software, if any, or otherwise set forth on the Website, for a period required by your local law. Synology will use commercially reasonable efforts to, in Synology’s sole discretion, either correct any such nonconformity in the Software or replace any Software that fails to comply with the foregoing warranty provided that you give Synology written notice of such noncompliance within the warranty period. The foregoing warranty does not apply to any noncompliance resulting from any: (w) use, reproduction, distribution, or disclosure not by this EULA; (x) any customization, modification, or other alteration of the Software by anyone other than Synology; (y) a combination of the Software with any product, services, or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA.
Section 10. Support. During the period specified in Section 9, Synology will make available to you the support services. Following the expiration of the applicable period, support for Software may be available from Synology upon written request.
Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED “AS IS” AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, ABOUT THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.
Section 12. Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL, OR SIMILAR DAMAGES OR LIABILITY WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Section 13. Limitation of Liability. SYNOLOGY’S AND ITS SUPPLIERS’ LIABILITY ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT REGARDLESS OF THE NUMBER OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties, disclaimer of certain damages, and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to you.
Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations.
Section 15. Termination. Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the Software and all of its parts.
Section 16. Assignment. You may not transfer or assign your rights under this EULA to any third party, except for that preinstalled in the Products. Any such transfer or assignment in violation of the foregoing restriction will be void.
Section 17. Applicable Law. Unless expressly prohibited by local law, this EULA is governed by and construed by the laws of the country, by which Synology Inc. was organized without regard to any conflict of law principles to the contrary.
Section 18. Dispute Resolution. Any dispute, controversy, or claim arising out of or relating to this EULA will be resolved exclusively and finally by arbitration conducted by three neutral arbitrators by the procedures of the Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class-action basis. The arbitration shall take place in Taipei and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute, controversy, or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and you expressly and knowingly waive those rights and agrees to resolve any disputes through binding arbitration by the provisions of this Section 18. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology’s intellectual property rights.
Section 19. Attorneys’ Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys’ fees.
Section 20. Severability. If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this EULA will remain in full force and effect.
Section 21. Entire Agreement. This EULA sets forth the entire agreement of Synology and you concerning the Software and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether written or oral. No amendment, modification, or waiver of any of the provisions of this EULA will be valid unless outlined in a written instrument signed by the party to be bound thereby.

SYNOLOGY, INC.
LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY (“WARRANTY”) APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, “SYNOLOGY”). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT. INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE YOU PURCHASED IT FOR A REFUND BY THE RESELLER’S APPLICABLE RETURN POLICY.

Section 1. Products

“Products” refer to New Products or Refurbished Products.
“New Product”, includes: (1) “Category I Product” means Synology product models RS810+, RS810RP+, RX410, all FSseries models, all DS/RS NAS models with the XS+/XS suffix (except RS3413xs+) in or after 13-series, all DX/RX/RXD expansion units with 12 or more drive bays in or after 13-series, 10GbE NIC, ECC DDR4 and ECC DDR3 memory modules. (2) “Category II Product” means Synology product models RS3413xs+, RS3412xs, RS3412RPxs, RS3411xs, RS3411RPxs, RS2211+, RS2211RP+, RS411, RS409RP+, RS409+, RS409, RS408-RP, RS408, RS407, DS3612xs, DS3611xs, DS2411+, DS1511+, DS1010+, DS509+, DS508, EDS14, RX1211, RX1211RP, RX4, DX1211, DX510, DX5, NVR1218, NVR216, VS960HD, VS360HD, VS240HD, M2D17, and all other non-ECC memory modules not included in Category I. (3) “Category III Product” means Synology product models that match the following requirements: all DS NASmodels without the XS+/XS suffix and with 5 or more drive bays in or after 12-series, all RS NAS models without the XS+/XS suffix in or after 12 series, and all DX/RX expansion units with 4 or 5 drive bays in or after 12 series. (4) “Category IV Product” means all other Synology product models purchased by Customer after March 1, 2008. (5) “Category V Product” means all other Synology product models purchased by Customer before February 29, 2008, and any “spare parts” purchased directly from Synology.
“Refurbished Product” means all Synology products that have been refurbished and sold directly by Synology through the Online Store, not including those sold by an authorized Synology distributor or reseller.
Other definitions: “Customer” means the original person or entity purchasing the Product from Synology or an authorized Synology distributor or reseller; “Online Store” means an online shop operated by Synology or Synology’s affiliate; “Software” means the Synology proprietary software that accompanies the Product when purchased by the Customer, which is downloaded by Customer from the Web Site, or is pre-installed on the Product by Synology, and includes any firmware, associated media, images, animations, video, audio, text, and applets incorporated into the software or Product and any updates or upgrades to such software.

Section 2. Warranty Period

“Warranty Period”: The warranty period commences on the date the Product is purchased by the customer and ends (1) five years after such date for Category I Products; (2) three years after such date for Category II & all Products; (3) two years after such date for Category IV Products; (4) one year after such date for Category V Products; or (5) 90 days after such date for Refurbished Products, except for those sold as “as is” or with “no warranty” on the Online Store.
“Extended Warranty Period”: For Customers purchasing EW201 optional service for applicable Products specified in Section 1 (b), the Warranty Period specified in Section 2 (a) of the applicable Product registered with EW201 optional service will be extended by two years.

Section 3. Limited Warranty and Remedies

Limited Warranty. Subject to Section 3.6, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially by Synology’s published specifications for the Product during the Warranty Period. Such limited warranty does not apply to the Software which shall be subject to the accompanying end user license agreement provided with the Product, if any. Synology provides no warranty to Refurbished Products sold as “as is” or with “no warranty” on the Online Store.
Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties outlined in Section 3.1 within the applicable Warranty Period in the manner set forth below, then, upon verification of the noncompliance by Synology, Synology will, at Synology’s option: (a) use commercially reasonable efforts to repair the Product, or (b) replace the noncomplying Product or part thereof upon return of the complete Product by Section 3.3 The foregoing sets forth Synology’s entire liability and Customer’s sole and exclusive remedy for any breach of warranty under Section 3.1 or any other defect or deficiency in the Product. The customer will reasonably assist Synology in diagnosing and validating any non-conformity with the Product. The warranty outlined in Section 3.1 does not include: (1) any warranty relating to the Software; (2) physical installation or removal of the Product from the Customer’s site; (3) visits to the Customer’s site; (4) labor necessary to effect repairs or replace defective parts other than during Synology’s or its contracted service providers normal local business hours, exclusive of weekends and service providers’ holidays; (5) any work with any third party equipment or software; (6) any warranty of the hard disk if installed by Customer or any other third party; or (7) any warranty of compatibility with the hard disk.
Return. Any Product returned by Customer under Section 3.2 must be assigned a Return Merchandise Authorization (“RMA”) number by Synology before shipment and must be returned by Synology’s then-current RMA procedures. Customers may contact any authorized Synology distributor or reseller or Synology Support to obtain assistance in obtaining an RMA and must provide proof of purchase and product serial number when asking for such
assistance. For warranty claims, the Customer must return the complete Product to Synology by Section 3.3 to be eligible for coverage under this Warranty. Any Product returned without an RMA number, or any Product that has been disassembled (except under the direction of Synology) will be refused and returned to the Customer at the Customer’s expense. Any Product that has been assigned an RMA number must be returned in the same condition as it was received from Synology to the address designated by Synology, freight pre- paid, in packaging sufficient to protect the contents thereof and with the RMA number prominently displayed on the outside of the box. The customer is responsible for insurance and risk of loss concerning returned items until they are properly received by Synology. A Product with an RMA number must be returned within fifteen (15) days after issuance of the applicable RMA number.
Replacement by Synology. If Synology elects to replace any Product under this Warranty outlined in Section 3.1, then Synology will ship a replacement Product at Synology’s expense via the shipping method selected by Synology after receipt of the nonconforming Product returned by Section 3.3 and validation by Synology that the Product does not conform to the warranty. In some countries, Synology may at its discretion apply the Synology Replacement Service to certain Products, through which Synology will ship a replacement Product to the Customer before its receipt of the nonconforming Product returned by the Customer (“Synology Replacement Service”).
Support. During the Warranty Period, Synology will make available to Customer the support services. Following the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request.
Exclusions. The foregoing warranties and warranty obligations do not apply to any Product that (a) has been installed or used in a manner not specified or described in the Product specifications; (b) has been repaired, modified, or altered by anyone other than Synology or its agent or designee; (c) has been in any way misused, abused, or damaged; (d) has been used with items not provided by Synology other than the hardware or software for which the Product is designed; or (e) otherwise fails to conform to the Product specifications and such failure is attributable to causes not within or under Synology’s control. Further, the foregoing warranties will be void if (1) Customer disassembles the Product except as authorized by Synology; (2) Customer fails to implement any correction, modification, enhancement, improvement, or other update made available to Customer by Synology; or (3) Customer implements, installs, or uses any correction, modification, enhancement, improvement, or other updates made available by any third party. The warranty outlined in Section 3 will terminate upon the Customer’s sale or transfer of the Product to a third party.
Disclaimer of Warranties. THE WARRANTIES, OBLIGATIONS, AND LIABILITIES OF SYNOLOGY AND THE REMEDIES OF THE CUSTOMER OUTLINED IN THIS WARRANTY ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND CUSTOMER HEREBY WAIVES, RELEASES, AND DISCLAIMS ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF SYNOLOGY AND ALL OTHER RIGHTS, CLAIMS, AND REMEDIES OF THE CUSTOMER AGAINST SYNOLOGY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, CONCERNING THE PRODUCT, ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES DELIVERED UNDER THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY: (A) IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE; (B) IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE; (C) CLAIM OF INFRINGEMENT OR MISAPPROPRIATION; OR (D) CLAIM IN TORT (WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY OR OTHER THEORY). SYNOLOGY MAKES NO GUARANTEE AND SPECIFICALLY DISCLAIMS ANY WARRANTY THAT THE DATA OR INFORMATION STORED ON ANY SYNOLOGY PRODUCT WILL BE SECURE AND WITHOUT RISK OF DATA LOSS. SYNOLOGY RECOMMENDS THAT THE CUSTOMER TAKE APPROPRIATE MEASURES TO BACK UP THE DATA STORED ON THE PRODUCT. SOME STATES/JURISDICTIONS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO CUSTOMER.

Section 4. Limitations of Liability

Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its
reasonable control (including, without limitation, any act or failure to act by Customer).
Disclaimer of Certain Damages. IN NO EVENT WILL SYNOLOGY OR ITS SUPPLIERS BE LIABLE FOR THE COST OF COVER OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL, OR SIMILAR DAMAGES OR LIABILITIES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Limitation of Liability. SYNOLOGY’S AND ITS SUPPLIERS’ LIABILITY ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT REGARDLESS OF THE NUMBER OF DAMAGES THE CUSTOMER MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The laws of some states/jurisdictions do not allow exclusion or limitation of certain damages. To the extent that those laws apply to the Product, the exclusions and limitations set forth above may not apply to the Customer.

Section 5. Miscellaneous

Proprietary Rights. The Product and any accompanying Software and documentation provided with the Product include proprietary and intellectual property rights of Synology and its third-party suppliers and licensors. Synology retains and reserves all rights, titles, and interests in the intellectual property rights of the Product, and no title to or ownership of any intellectual property rights in or to the Product, any accompanying Software or documentation, and any other goods provided under this Warranty is transferred to Customer under this Warranty. The customer will (a) comply with the terms and conditions of the Synology end-user license agreement accompanying any Software furnished by Synology or an authorized Synology distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or otherwise misappropriate, circumvent, or violate any of Synology’s intellectual property rights.
Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise, without the prior written consent of Synology.
No Additional Terms. Except as expressly permitted by this Warranty, neither party will be bound by, and each party specifically, objects to, any term, condition, or other provision that conflicts with the provisions of this Warranty that are made by the other party in any purchase order, receipt, acceptance, confirmation, correspondence, or otherwise, unless each the party specifically agrees to such provision in writing. Further, if this Warranty conflicts with any terms or conditions of any other agreement entered into by the parties concerning the Product, this Warranty will prevail unless the other agreement specifically references the sections of this Warranty that it supersedes.
Applicable Law. Unless explicitly prohibited by local law, this Warranty is governed by the laws of the State of Washington, U.S.A. for the Customers residing within the United States; and by the laws of the Republic of China (Taiwan) for Customers not residing within the United States, without regard to any conflict of law principles to the contrary. The 1980 U.N. Convention on Contracts for the International Sale of Goods or any successor thereto does not apply.
Dispute Resolution. Any dispute, controversy, or claim arising out of or relating to this Warranty, the Product, or services provided by Synology concerning the Product, or the relationship between Customers residing within the United States and Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class-action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online, or in person as determined by the arbitrator at the request of the parties. The prevailing party in any arbitration or legal action occurring within the United States or otherwise shall receive all costs and reasonable attorneys’ fees, including any arbitration fee paid by the prevailing party. Any decision rendered in such arbitration proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. Customer understands that, in the absence of this provision, Customer would have had a right to litigate any such dispute, controversy, or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and Customer expressly and knowingly waives those rights and agrees to resolve any disputes through binding arbitration by the provisions of this Section 5.5.
For Customers not residing within the United States, any dispute, controversy, or claim described in this section shall be finally resolved by arbitration conducted by three neutral arbitrators by the procedures of the R.O.C. Arbitration Law and related enforcement rules. The arbitration shall take place in Taipei, Taiwan, R.O.C., and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having jurisdiction. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any provision of this Warranty relating to Synology’s intellectual property rights.
Attorneys’ Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys’ fees. Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with
all applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration Regulations.
Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this Warranty will remain in full force and effect.
Entire Agreement. This Warranty constitutes the entire agreement and supersedes any prior agreements, between Synology and Customer related to the subject matter hereof. No amendment, modification, or waiver of any of the provisions of this Warranty will be valid unless outlined in a written instrument signed by the party to be bound thereby.

Synology RS1619xs+ RackStation Hardware User Manual

Synology RS1619xs+ RackStation Hardware User Manual

Before You Start

System Fans

Hardware Setup

Chapter 2: Hardware Setup

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Synology User Manuals

Related Manuals