KOHLER K-P28304-KS Rite-Temp Thermostatic Valve Kit with Stops Instructions

July 8, 2024
Kohler

KOHLER K-P28304-KS Rite-Temp Thermostatic Valve Kit with Stops

KOHLER K-P28304-KS Rite-Temp Thermostatic Valve Kit with
Stops

INSTRUCTION MANUAL

MODEL: K-P28304-KS

Thermostatic valve kit with stops, project pack

Codes/Standards

  • ASME A112.18.1/CSA B125.1
    SSE 1016/ASME A112.1016/CSA B125.16
    APMO Certification

KOHLER® Faucet Lifetime Limited Warranty

  • See website for detailed warranty information.

Features

  • Project pack: Supplied six per case
  • Includes valve body, thermostatic cartridge, rough-in guide and mud guard
  • 1/2″ Universal NPT and direct sweat inlets and outlets with stops (installed)
  • Service stops include integral check valves
  • 9 gpm (34 l/min) maximum flow rate at 45 psi
  • Single lever design cycles from off through cold to hot
  • One-piece cartridge design simplifies installation and maintenance
  • Adjustable high-temperature limit stop to control maximum water temperature
  • Requires valve trim to complete installation (sold separately)

Material

  • Forged dezincification-resistant brass body provides long term reliability and resistance to aggressive water conditions Technology
  • Thermostatic technology automatically maintains outlet temperature within +/- 3.6°F (+/- 2°C) during water pressure fluctuations

Installation

  • Designed for use in standard, back-to-back and thin wall installations
  • Valve body features integral mounting locations and symmetrical valve inlets to simplify installation
  • Cartridge is reversible for installations where hot and cold supplies are reversed
  • Rough-in guide designed for both standard and thin wall installations
  • Installed valve rough-in can be flushed and pressure-tested to 150 psi max (air or water) without cartridge by using included test cap

Optional Products/Accessories

  • K-10350 Deep rough-in kit
  • K-10351 Test cap for K-8300 Series valve bodies

Rite-Temp

Technical Information

All product dimensions are nominal.

  • Shower Valve: Flow Rate (Max) @ 45 psi 9 gal/min (34.1 l/min)
  • Manufacturer’s minimum rated flow: 1.5 gal/min (5.7 l/min)
  • Pressure: 45 psi (3.1 bar)
  • Maximum (Static) Pressure: 125 psi (8.6 bar)
  • Minimum (Operating) Pressure: 20 psi (1.4 bar)

Notes

  • Install this product according to the installation instructions.
  • For use with showerheads or handsprays rated at 1.5 gal/min (5.7 l/min) or higher.
  • Avoid cross-flow conditions. Do not install shutoff device on either valve outlet.
  • Cap the shower outlet if deck-mount spout, diverter, or handshower is connected to the spout outlet.

1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
6-15-2024 20:26 – US

Specifications:

  • Model: K-P28304-KS

  • Material: High-quality material for long-term reliability and resistance to aggressive water conditions

  • Codes/Standards: ASME A112.18.1/CSA B125.1, ASSE 1016/ASME A112.1016/CSA B125.16, IAPMO Certification

  • Technology: Visit website for detailed warranty information

  • Max Finished Wall: 1-15/16″ (49 mm)

  • Min Finished Wall: 1-15/16″ (49 mm)

  • Outlet Port: 1/2 NPT and 5/8 ID for 1/2 Nominal Copper Tubing

FAQ:

Q: What is the maximum flow rate of the shower valve?

A: The maximum flow rate of the shower valve is 9 gallons per minute (34.1 liters per minute) at 45 psi.

Q: Can I use showerheads or handsprays rated below 1.5 gal/min?

A: For optimal performance, use showerheads or handsprays rated at 1.5 gal/min (5.7 l/min) or higher.

Q: What is the recommended operating pressure for this product?

A: The minimum operating pressure is 20 psi (1.4 bar), and the maximum static pressure is 125 psi (8.6 bar).

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals