NEXX X.WED3 Carbon Motocross Helmet Installation Guide

July 8, 2024
NEXX

NEXX X.WED3 Carbon Motocross Helmet

NEXX-X-WED3-Carbon-Motocross-Helmet-PRODUCT

Specifications

  • Model: X.WED3
  • Usage: Dual Sport Helmet
  • Features: Enduro, Off-Road, Street modes
  • Material: Carbon Version
  • Special Features: X-PRO, X-LOCK MAGNETIC, SIDE BUMPER, X-HIDRO

Product Usage Instructions

Helmet Adjustment and Configuration

  1. Adjusting the Peak: Follow instructions in section 12 for adjusting the peak to your preference.
  2. Changing Helmet Modes: Switch between Street and Off-Road modes as per sections 16 and 17.
  3. Visor Maintenance:
  4. Remove, clean, and place the visor according to sections 19, 20, and 21.
  5. Utilize the inner sun visor with instructions from sections 22, 23, and 24.
  6. For Pinlock and Ergo-Padding placement, refer to sections 25 and 26.
  7. Liner Care: Use the Fast Release System to remove and place the inner lining (sections 32, 35).
  8. Additional Accessories: Explore fitting the hydration tube, dust filter, and action camera supports (sections 40, 41, 27-29).

Helmet Safety and Care Prioritize helmet safety by ensuring no alterations or non-homologated accessories are used. Replace helmets post- impact or severe blows for continued protection.

Sizing and Homologation Refer to the size chart (section 45) for correct helmet sizing. Familiarize yourself with the homologation tag (section 50) for certification details.

Frequently Asked Questions

Q: How often should I clean my helmet visor?

 **A:** It is recommended to clean the visor regularly, especially if dirt or debris obstruct visibility.

Q: Can I use aftermarket accessories with the X.WED3 helmet?

 **A:** Only homologated accessories should be used to maintain helmet safety standards.

Q: What should I do if my helmet suffers an impact?

 **A:** Replace the helmet even if no visible damage is present to ensure continued protection.

Q: How do I know if a specific accessory is compatible with the helmet?

 **A:** Check for matching symbols on both the accessory and the helmet’s homologation label for compatibility.

EN CN
X.WED3

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the
moment they wear NEXX.
NEXX “”
NEXX

Please read this manual very carefully before wearing your helmet and keep it in a safe place. For a correct

EN

use and for your safety, please pay attention to following instructions. The main function of the helmet is

to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by

partial destruction of its component parts and, even though damage may not be apparent, any helmet

which has suffered an impact in an accident or received a similarly severe blow or other abuse should be

replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or

it´s component parts, without the approval of the Type Approval Authority, that may decrease safety for

the user. Only homologated accessories will maintain the helmet safety.
No component or device may be fitted to or incorporated in the protective helmet unless it is designed in such a way that it will not cause injury and that, when it is fitted to or incorporated in the protective helmet,

the helmet still complies with the requirements of the homologation. No accessory shall be mounted on the helmet if some of the symbols, other than location fitting symbols,

marked in the accessory homologation is not marked in the helmet homologation label.

CN

5

X.WED 3
DUAL SPORT
ENDURO
OFF-ROAD
STREET
6

PARTS DESCRIPTION

5 7 2

3

4

9

8
13 12 1

6

10

11

1 – Shell /

10 – X.COM 3 cover / X-COM 3

2 – Visor / Shield / / 3 – Top Center Air Intake ventilation
4 – Top side Air Intake ventilation 5 – Peak /

11- FRS – Fast Release System Button 12 – Visor Mechanism / / 13 – Gog gle Strap Holder /

6 – Chin Air Intake Ventilation / 7 – Frontal Air Intake Ventilation / 8 – Spoiler /

9 – Sun Visor Lever /

7

CARBON VERSION EXCLUSIVES

X-PRO

X-LOCK MAGNETIC

8

SIDE BUMPER

X-HIDRO
X-

VENTILATIONS

TOP INTAKE VENTILATIONS OPEN

AIRFLOW CIRCUIT

TOP INTAKE VENTILATIONS CLOSE

9

VENTILATIONS

FRONTAL INTAKE VENTILATIONS CLOSE
FRONTAL INTAKE VENTILATIONS OPEN

AIRFLOW CIRCUIT

LATERAL INTAKE VENTILATIONS CLOSE

LATERAL INTAKE VENTILATIONS OPEN

10

VENTILATIONS

AIRFLOW CIRCUIT

CHIN INTAKE VENTILATIONS OPEN
CHIN INTAKE VENTILATIONS CLOSE

11

HOW TO ADJUST THE PEAK

1 SLIGHTLY LOOSE THE SCREW

2 CHOOSE ONE OF THE THREE POSITIONS
AND MOVE THE PEAK

3 TIGHTEN THE SCREW TO THE CHOSEN POSITION
12

HOW TO PLACE THE PEAK EXTENSOR

1 REMOVE THE COVERS, BOTH SIDES

2 PLACE THE EXTENSOR AND SLIDE

2 PLACE THE EXTENSOR AND SLIDE

3 FIX THE EXTENSOR AT THE HOLDER HOLE
BOTH SIDES

13

HOW TO ADJUST THE PEAK EXTENSOR

1 EXTENSOR HOLDER WITH 3 POSITIONS 3

2 ADJUST THE PEAK TO YOUR FAVORITE
POSITION

14

HOW TO REMOVE THE PEAK

1 UNSCREW TOP SHELL HOLDER

2 REMOVE THE SCREW

3 REMOVE THE SCREWS BOTH SIDES

4 REMOVE THE PEAK

15

HOW TO CHANGE HELMET TO STREET MODE
1 REMOVE THE PEAK (SEE DETAILS PREVIOUS PAGE) STREET COVERS x3
2 INSERT THE “STREET COVERS” IN THE HOLES “”
16

HOW TO CHANGE HELMET TO OFF ROAD MODE

FRONT

VISOR MECHANISM COVERS
BACK

1 REMOVE THE VISOR (SEE PAGE 20) 20

2 ALIGN THE COVER PINS WITH THE VISOR
MECHANISM HOLES

3 PRESS TO LOCK

4 PUSH DOWN TO THE FINAL POSITION 17

HOW TO REMOVE THE VISOR MECHANISM COVER

1 PUSH UP THE COVER UP

2 PUSH THE BUTTON – BOTH SIDES

3 REMOVE THE COVER
18

HOW TO CLEAN THE VISOR

To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled)

EN

and a soft cloth. If the helmet is deeply dirty (ex.Insect remains) can add a little liquid from the dish to water.

Remove the visor from the helmet before carrying a deeper cleaning. Never use objects to clean the helmet

that may damage/scratch the visor. Always store the helmet in a dry place and protected from light,

preferably in the bag provided by NEXX HELMETS.

CN / NEXX HELMETS

19

HOW TO REMOVE THE VISOR

1 OPEN THE VISOR ALL THE WAY UP

2 PUSH THE BUTTON – BOTH SIDES
20

3 REMOVE THE VISOR

HOW TO PLACE THE VISOR

1 ALIGN THE VISOR PINS WITH THE
MECHANISM HOLES

2 PRESS TO LOCK 21

HOW TO USE THE INNER SUN VISOR

1 CLOSE

2 FULL CLOSE POSITION

3 OPEN
22

4 FULL OPEN POSITION

HOW TO REMOVE DE INNER SUN VISOR

1 OPEN THE SUNVISOR

2 PULL FROM BOTH SIDES

3 PULL FROM BOTH SIDES

4 REMOVE THE VISOR
23

HOW TO PLACE THE INNER SUN VISOR

1 INSERT BOTH SIDES

2 PULL UP
24

3 READY TO USE

PINLOCK
4
4- Remove the film 25

ERGO PADDING *

  • Not included / 26

CAMERA SIDE SUPPORT

1

Use Tork screwdriver T10 or Hex screwdriver H2.5

3

5

2
4
6 27

HOW TO PLACE THE CHIN ACTION CAMERA SUPPORT

1 PUSH THE BUTTONS AND REMOVE THE
COVER

2 CHOOSE THE POSITION

3 INSERT THE ADAPTERS AND FIX WITH THE SCREW
28

HOW TO PLACE THE TOP ACTION CAMERA SUPPORT

1 UNSCREW TOP PEAK HOLDER

2 PLACE SUPPORT ON TOP OF THE PEAK

3 SCREW TOP PEAK HOLDER WTH THE
BIGGER SCREW

4 CAN ALSO BE USED WITHOUT THE PEAK

29

LINING SPECIFICATIONS

EN The lining of the helmet has the following characteristics: – Removable (only some models), – Anti-allergy – Anti-sweat This lining can be removed and washable, as shown in the picture (only some models). If for some reason this lining is damage it can be easily replaced (only some models).
CN – – –
30

REMOVABLE LINER PARTS

Ear Pad (R)

Deflector
Ear Pad (L)

Center Linner
31

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS FOR CLEANING PURPOSES

1 PULL THE LEVER

2 SLIDE THE RED BUTTON
32

3 PULL THE LINNER EARPAD
(REPEAT THE PROCESS THE OTHER SIDE)
(

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS FOR CLEANING PURPOSES

1 PULL THE LEVER

2 SLIDE THE RED BUTTON

3 OPEN THE CHIN STRAP
33

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS IN CASE OF EMERGENCY

4 PULL THE EMERGENCY STRAP (BOTH SIDES)

5 REMOVE THE EARPAD (BOTH SIDES)

6 REMOVE THE HELMET SAFELY
34

HOW TO REMOVE THE INNER LINING

1 PULL THE EARPADS BOTH SIDES USING
FRS SYSTEM (SEE PREVIOUS PAGE)

2 PULL THE BACK SIDE OF THE LINNER

3 RELEASE THE SPRINGS

4 PULL THE FRONTAL PART OF THE LINNER 35

HOW TO PLACE THE INNER LINING

1 INSERT THE FRONT OF THE LINNER

2 TIGHTEN THE SPRINGS

3 INSERT ON THE BACK
36

4 MAKE THE STRAP PASS THROUGH THE
EARPADS

HOW TO PLACE THE INNER LINING

5 SLIDE THE RED BUTTON TO LOOSE THE
EARPADS (SEE FRS PAG.31)
(31″”

6 INSERT ( 37)

7 INSERT ( 37)

8 PRESS AND SLIDE FRS BUTTON UNTIL
CLOSE POSITION

37

HOW TO PLACE THE INNER LINING

9 PRESS THE PIN

10 PRESS THE PIN

11

PRESS THE PIN

12 MAKE SURE THE BUTTON IS SECURELY LOCKED AND THE EARPADS SECURELY ATTACHED

38

HOW TO PLACE THE INNER LINING

INSERT EARPADS WITH FRS

39

HOW TO PLACE THE HIDRATATION TUBE

1

2

3
*Available in some models 40

HOW TO CHANGE DUST FILTER FOR WINTER FILTER

1 REMOVE THE CHIN FILTER HOLDER AND THE DUST FILTER
2 INSERT THE WINTER FILTER AND THE CHIN FILTER HOLDER 41

HOW TO REMOVE GOGLE STRAP HOLDER

STRAP HOLDER COVER

1 UNSCREW THE GOGGLE STRAP HOLDER
2 SCREW THE STRAP HOLDER COVER
42

ACCESSORIES

HELMET BAG

ACCESSORIES BAG

VISOR MECHANISM COVERS X2

DEFLECTOR

PEAK EXTENSOR

EXTRA VISOR *

*Available in some models / 43

ACCESSORIES

CAMERA TOP SUPPORT

CAMERA CHIN SUPPORT

CAMERA SIDE SUPPORT

WINTER FILTER

STRAP HOLDER COVER

STREET COVERS X3
x3

CAMERA TOP
SUPPORT SCREW

PEAK EXTRA SCREW

HEX KEY

44

PINLOCK

SMALL SCREWS X3
x3

SIZE CHART

SHELL SIZE

HELMET SIZE

HEAD SIZE

CM

IN

XXS

51/52

20,1/20,5

XS

53/54

20,9/21,3

S

55/56

21,7/22

M

57/58

22,4/22,8

L

59/60

23,2/23,6

XL

61/62

XXL

63/64

24/24,4 24,8/25,2

XXXL

65/66

25,6/26

EN CN

The size selection of the helmet is crucial to ensure the safety of the user. Never should use a helmet that is

EN

too small or too large in relation to the size of the head. To purchase a helmet is important that you try it:

make sure the helmet fits perfectly to the head, there should be no gap between the helmet and the head;

make some movements of rotation (left and right ) with the helmet on the head(closed) this should not shake;

it´s important that the helmet is comfortable and involving the entire head.

CN

45

X.COM 3 *
The X.WED 3 model is by Default Equipped to Accommodate the NEXX Helmets X-COM 3 Communications System.
X.WED3

Mesh
*PRO version only
PRO

1

2

3

4

  • Not included / 46

X.COM 3 *

RIGHT SIDE

  • Not included /

Mesh
*PRO version only PRO
47

X.COM 3 *
LEFT SIDE

ANTENNA

  • Not included / 48

HOMOLOGATION TAG

HOMOLOGATION TAG INSERTED HERE 49

HELMET CARE SOIN À PRENDRE PFLEGE
EN – Light colors with matte finish require extra care as they are naturally more exposed to dust, fumes, compounds or other types of impurities. THIS IS NOT COVERED UNDER WARRANTY! Neon colors will fade when subjected to prolonged UV rays exposure. THIS IS NOT COVERED UNDER WARRANTY! We are not liable for any damage, loss or detriment resulting from faulty assembly of any accessory.
– Do not expose the helmet to any type of liquid solvent;
– The helmet should be handled with care. Leaving it drops can damage the painting as well as reduce their characteristics of protection. THIS NOT COVERED UNDER WARRANTY!
– Keep the helmet in a safe place (not hang on the mirror of motorcycle or other support than can damage the lining). Do not carry your helmet on the biker or in the arm while driving.
– Always use the helmet in the proper position, using the buckle to adjust to the head;
– In order to maintain trouble free operation of the visor, it is advisable to periodically lubricate the mechanisms and rubber parts around the visor with silicone oil. The application may be made with a brush or with the help of a cotton swab. Apply sparingly and remove the excess with a dry clean cloth. This proper care will maintain the softness of the rubber seal and will dramatically increase the durability of the visor fixing mechanism.
– Clean and lubricate mechanisms after use in extreme off road dust and dirt conditions.
CN –






50

This hight quality helmet is made with the most advanced European technology. The helmets are

EN

technologically advanced for the motorcycle rider´s protections, which are made for motorcycle riding only.

This helmet specifications is subject to change without notice.

CN

51

Nexxpro Fábrica de Capacetes S. A.
Zona insdustrial de Amoreira da Gândara, lote nº11 3780-024 Amoreira da Gândara, Anadia – PORTUGAL nexx@nexxpro.com www.nexx-helmets.com

MADE IN MARÇO 2023/R01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals