KOHLER K-702425-L Frameless Sliding Bath Door Owner’s Manual
- July 6, 2024
- Kohler
Table of Contents
KOHLER K-702425-L Frameless Sliding Bath Door
Product Information
Specifications
- Product: Frameless sliding bath door K-702425-L
- Features: Minimalist look, out-of-plumb adjustability, CleanCoat technology
- Material: Glass
- Installation: Refer to installation instructions
- Head Clearance: 7-1/16″ (179 mm)
- Codes/Standards: ANSI Z97.1, CAN/CGSB-12.1, CPSC 16CFR 1201
- Available Colors/Finishes: BNK Anodized Brushed Nickel
- Available Glass Options: Crystal Clear
Product Usage Instructions
Installation
Follow the detailed installation instructions provided with the product.
Ensure proper head clearance and vertical opening for installation clearance.
Cleaning and Maintenance
Use a mild glass cleaner to clean the door. Avoid abrasive cleaners that
may damage the glass or finishes.
Adjustability
The door provides out-of-plumb adjustability for easy opening and closing.
Follow the instructions to adjust as needed.
Warranty Information
Refer to the website for detailed warranty information regarding the product.
FAQ
-
Q: What is the recommended clearance for installation?
A: The vertical opening should be a minimum of 64-1/2″ (1639 mm) to allow for installation clearance. -
Q: How should I clean the glass door?
A: Use a mild glass cleaner to clean the door. Avoid abrasive cleaners that may damage the glass or finishes.
Features
- The frameless design emphasizes glass and creates a sleek, minimalist look
- Innovative roller design with stainless steel bearings simplifies installation and provides out-of-plumb adjustability while glass is installed
- 7″ (432 mm) vertical handles with 1/4″ (6 mm) inside knob for easy opening and closing
- The cushioned center guide provides smooth, quiet sliding action
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than the original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Smooth, easy-to-clean wall jambs
- Tempered glass ensures enhanced safety and durability
Material
- Frameless, 3/8″ (10 mm) thick Crystal Clear tempered glass
- Anodized aluminum prevents rust and corrosion
Installation
- Fits opening widths 56-5/8″ – 59-5/8″ (1438 –1514 mm)
- 61-9/16″ (1564 mm) high, with 55-9/16″ (1411 mm) minimum head clearance
- 3″ (76.2 mm) width adjustment
- Out-of-plumb adjustability simplifies installation
- For residential use only
- Not for use in hospitality
Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Available Glass Options
DIMENSION
Technical Information
All product dimensions are nominal.
- Base-To-Wall Radius – Max: 1/2″ (13 mm)
- Shower Ledge Min Flat: 3″ (76 mm)
- Shower Wall Min Flat: 3-1/2″ (89 mm)
Notes
Install this product according to the installation instructions.
The vertical opening should be a minimum of 64-1/2″ (1639 mm) to allow for
installation clearance.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada
6-12-2024 20:23 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER