SUPE D-PRO Underwater Strobe User Manual

July 6, 2024
SUPE

SUPE D-PRO Underwater Strobe

SUPE D-PRO Underwater Strobe

Product Specification

  • Model, SUPE D-PRD
  • Guide number :30
  • Flash tube: circular flash tube
  • Powerc 160Ws
  • Connection: optical cable/ 5 pin syn cord/flash of light
  • Illumination: 150′
  • Output: 1st-9th mode with 9th mode testing function
  • Battery pack: SUPE battery pack (3x 18650 lithium batteries)
  • Battery pack power :37.8 Wh
  • Flash Capacity, 500 flashes at full power, 3000 flashes at 1st mode
  • Recycle time: 0.1s-1.1s
  • Flash speed:Continuous Unlimited flash sync with 10 flash’s/sec at first mode
  • Power indicator: LCD displaying
  • Recycle Indicator: red light while charged and red light blacking while charging
  • Color temperature: 4800K
  • Waterproof Depth: 100m
  • Focus/target light: SW/ 500 lumens (center focus)
  • Dimensions: 170 x 90 mm
  • Weight (on land): 1080g without battery
  • Weight (underwater): 120g
  • Package: strobe,battery pack, charger,user manual
  • Do not support S-TTL&TTL
  • All the above parameters are based on SUPE testing standard

Operation Guide

All the data of this product are tested by dedicated battery and it varies with other or modified battery.

step 1 :Please check the battery and make sure it is fully charged before using.
Step 2: Connection: optical cable/5 pin syn cord/slave mode

Operation Guide

Step 3 :Knob switch to M position
Operation Guide

Step4 : Adjust mode 1-9 for different brightness.

Maintenance Guide

This is a professional underwater strobe which may used in some severe environment.So please maintain it timely for a longer lifetime.

  1. This is a high power tube strobe that release large heat. Do not use for more than 5mins on land to avoid tube or circuit burning.
  2. Please take the battery pack out when not in use that helps to avoid self-discharge.
  3. Please charge one time every three months if it will not be used for long time.
  4. Please check and lubricate the 0 -ring before diving.
  5. Please dip the flashlight in the freshwater for more than 10mins after diving,and clean up the sea salt,sediment and other corrosive substance.
  6. Please take care of the plug when charging to protect the charging port.
  7. Since this flashlight includes a battery pack,please handle gently to avoid the dangers from excessive collisions.
  8. lt isn’t allowed to disassemble the battery since it may cause the explosion by a short circuit.
  9. This product is prohibited from using or playing with by children under ten.

After-sales Service

All products are warranted for quality.Defective products can be exchanged for replacement through a local distributor/dealer within 15 days of purchase.After 15 days, all defective/malfunctioning products will be repaired free of charge for period of 15 months from the date of purchase.Beyond 15 months,a limit warranty applies ,covering the cost of labor.but not the cost of accessories or replacement parts.The warranty is nullified in all of the following situations:

  1. The product(s)is /are disassembled,reconstructed and /or modified by unauthorized parties.
  2. The product(s)is /are damaged through improper use.
  3. The product(s)is /are damaged by leakage of batteries.

For the latest information on products and services,please contact your national distributor or send an email to service@scubalamp.com.
The official website shall prevail in case of any product data changes.

CUSSTOMER SUPPORT

Made in China

www.scubalamp.com
sales@scubalamp.com
KOLTA ELECTRONICS CO., LTD.
TEL :+86-769-87199220
FAX :+86-769-87199220
E-mail: sales@scubalamp.com
Web :www.scubalamp.com

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals