SUPE F22 Compact Focus Light User Manual

: June 21, 2024
: SUPE

Table of Contents

Product Specification
Operation Guide
Maintenance Guide
After-sales Service
Customers Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPE F22 Compact Focus Light

Product Specification

Product Name:F22
Light Source: LED with a lifespan of up to 50,000hours
Output: White light(100%)2000 lumens, white light(50%)1000 lumens
Mode: White light(100%)-White light(50%)-Red light/UV
Working Voltage:2.7V-4.5V
Compatible Battery:1*21700 battery
Waterproof Depth:100m
Beam Angle:45°
Power Indicator:>70% Green 70%Yellow 30% Red
Runtime: White light(100%)150 minutes, White light(50%)300 minutes
Color Temperature(CCK):5600K
Color Rendering Index(CRI):83
Battery Capacity:18.5Wh(3.7V×5.0Ah)
Color: Black/Red
Dimensions: 142mm×27mm×43mm
Weight :273g(on land with battery)

Operation Guide

All the data of this product are tested by dedicated battery and it varies with other modified battery.

This product includes three modes: locked mode, standby mode, and working mode.

Lock mode: Refers to the product not working, the power is turned off, and the battery indicator light is not on.

Standby mode: Refers to the alternating flashing of the battery indicator light when the product is waiting for operation. (No operation in standby mode for 60 minutes, entering locked mode)

Working mode: Refers to the main light being turned on, and the battery indicator accurately displays the battery level.

Step 1: Open the battery pack and check whether the battery has power. Please charge the battery if no power.
Step 2: Put the battery into the light body and tighten it clockwise until it is tightened.
Step 3: Long press the switch for 3 seconds, the main light flashes once, enters standby mode, and lightly press the switch again, You can turn on white light highlight (100%).
Step 4: After turning on the white light highlight (100%), lightly press the switch once to enter the white light(50%), lightly press the switch once again to enter the red light/UV, and then lightly press the switch once again to turn it off. Dimming sequence: On – White light (100%) – White light (50%) – Red light/UV – Off

Maintenance Guide

This productis a professional diving light that may be used in some harsh environment. So please maintain itin time for a longer lifetime.

This is a high-power LED diving light that releases large heat.
Please don’t use it for more than 5mins on land to avoid LED or circuit burning.
Please loosen the battery part and the head part when not in use which helps to avoid self-discharge. A long-term discharge will shorten the service life of the battery.
Please charge it once every three months if not used for a long time.
Please check and lubricate the o-ring before diving.
Please dip the diving light in the freshwater for more than 10mins after diving, and clean up the sea salt, sediment, and other corrosive substance.
Please take care of the plug when charging to protect the charging port.
Since this diving light included a battery, please handle it gently to avoid the dangers from excessive collisions.
Dissembling the battery may cause an explosion by a short circuit, so it is not allowed to do.
This product is prohibited from using or playing with by children under ten.

After-sales Service

All products are warranted for quality. Defective products can be exchanged for replacement through a local distributor/dealer within 15 days of purchase. After 15 days, all defective/malfunctioning products will be repaired free of charge for period of 15 months from the date of purchase. Beyond 15 months, a limit warranty applies ,covering the cost of labor, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations:

The product(s)is /are disassembled, reconstructed and /or modified by unauthorized parties.
The product(s)is /are damaged through improper use.
The product(s)is /are damaged by leakage of batteries.
For the latest information on products and services, please contact your national distributor or send an email to service@scubalamp.com.

The official website shall prevail in case of any product data changes.