SUPE PV52T Photo and Video Light User Manual

: June 27, 2024
: SUPE

Table of Contents

SUPE PV52T Photo and Video Light
Specification
Operation Guide
- Operating Mode Description
Maintenance Guide
After-sales service
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPE PV52T Photo and Video Light

SUPE-PV52T-Photo-and-Video-Light-Product

Thank you for purchasing Scubalamp. please read the following information carefully before using it.

Specification

US LED with a lifespan of up to 50,000 hours.
CCK: 5600K CRI: 83 R9:54 TCLI: 79
Modes: white light(diffuse light)→>red light -> UV -> white light(spotlight)→> off (hide stepless dimming and Double-click on the pink light)
Working Voltage: 16.8V
Maximum Output of Brightness: High light (100%) 5000 lumens, Low light (50% 2500 lumens.
Runtime: High light (100% ) 60 minutes, low light (50%) 120 minutes.
Compatible Battery: 4*18650 SUPE dedicated battery (with overcharge & overdischarge protection IC)
Battery Pack Capacity: 44.4Wh(14.8V-3.0Ah)
Charging Time: about 2- 3 hours ( SUPE dedicated battery, Charging Voltage: (17.0V=3.0A).
Can withstand a max pressure of 20PA or seawater 100m pressure and is waterproof 100 meters.
Beam angle: 100°.
Patented side switch for non-visual, one-handed touch operation(ZL201621315690.0 ).
Power Indicator: > 70% GREEN; 30% – 70% YELLOW; ≤30% RED.
4mm toughened ultra-clear glass with diamond coating for superior strength and waterproof performance even under high compression.
High-grade aviation aluminium alloy with type Ill hard anodization for corrosion resistance in seawater.
Special internal recycle conductive structure for improved safety.
Professional photographic light especially improves photographic quality.
Body colour: Black.
Dimensions: 153mm(length) 53mm(body) 56mm(head).
Net weight: 605g(with battery on land).
Accessories: lanyard, spare o-ring.

Operation Guide

All the test data of this product is obtained by using a SUPE dedicated battery, and it varies if using other batteries or modified batteries.

Step 1: Check whether the battery has electricity. If there is no electricity, please charge it!
Step 2: Put the battery into the lamp body and tighten it clockwise until it is tightened (the battery indicator flashes alternately).
Step 3: Long press the button switch for 3 seconds, the main light flashes once to enter standby mode, then tap the switch once to white light high light.
Step 4: Adjust the light after the white light highlight (100%) is turned on, tap the switch once to enter the white light low light (50%), and tap the switch once to enter the Red/UV (Double-click on the pink light) and tap the switch once to turn off.
Step 5: After the white light is turned on, tap the switch once to enter the white light low light, tap the switch once to enter the flash, and tap the switch twice to turn it off.

Operating Mode Description

This product contains three modes: lock mode, standby mode, and working mode.

Lock mode
The product is not working, the power is turned off, and the power indicator is off.
Standby mode
The power indicator flashes alternately while the product is waiting to work. (Standby mode without operation for 30 minutes, enter lock mode).
Working mode
The main light is turned on, and the power indicator shows the power accurately.

Maintenance Guide

This product is a professional diving flashlight that may be used in some harsh environments. So please maintain it in time for a longer lifetime.

This is a high-power LED diving flashlight that releases large heat. Please don’t use it for more than 5 minutes on land to avoid LED or circuit burning.
Please loosen the battery part and the head part when not in use which helps to avoid self-discharge. A long-term discharge will shorten the service life of the battery.
Please charge it once every three months if not been used for a long time.
Please check and lubricate the o-ring before diving.
Please dip the flashlight in the freshwater for more than 10 minutes after diving, and clean up the sea salt, sediment, and other corrosive substances.
Please take care of the plug when charging to protect the charging port.
Since this flashlight includes a battery, please handle it gently to avoid the dangers trom excessive collisions.
Dissembling the battery may cause an explosion by a short circuit, so it is not allowed to do so.
This product is prohibited from using or playing with by children under ten.

After-sales service

All SUPE products have a warranty period, defective products can be replaced free of charge at your local distributor/dealer within 15 days of purchase. And after 15 days all defects/failures of SUPE products will enter the free period, and the free maintenance period will be within 15 months from the date of purchase. After 15 months, it will enter the limited warranty period, and labour costs will be charged, but no accessories or replacement parts will be charged.

The warranty is invalidated in all of the following situations:

The product(s) is/are disassembled, reconstructed, and/or modified by unauthorized parties.
The product(s) is/are damaged via improper use.
The battery is leaked and damaged, including damage caused by untimely maintenance.

For the latest news on SUPE products and services, please contact your SUPE distributor or send an email to sevrvice@scubalamp.com. The SUPE official website shall prevail in case of any product data changes.