Godox P1200R LED Light Panel Instruction Manual

Godox P1200R LED Light Panel

Specifications

• Product Name: LED Knowledge LED Light Panel
• Model: P1200R Hard
• Power: 1200W
• Input Voltage: AC100V-240V
• Color Temperature: 1800K-10000K
• Color Modes: RGB, CCT, HSI, RGBW, GEL, X-Y
• Control Options: DMX512, RDM, LumenRadio CRMX, App

Product Usage Instructions

1. Power and Input:

Connect the AC input to a power source within the specified voltage range (AC100V-240V).

2. Color Temperature Adjustment:

Use the menu options to adjust the color temperature from 1800K to 10000K according to your requirements.

3. Color Modes:

Select from various color modes such as RGB, CCT, HSI, RGBW, GEL, and X-Y using the mode button on the panel.

4. DMX Controls:

If using DMX control, connect the DMX cables accordingly for input and output, and configure the settings as needed.

Frequently Asked Questions

• Q: How do I reset the panel to default settings?
  • A: To reset the panel, navigate to the menu option and select the reset or default settings function.
• Q: Can I control the panel using a mobile app?
  • A: Yes, you can control the panel using the dedicated mobile app provided by the manufacturer. Ensure to connect the panel and the app via the specified method.

Wechat Official Account 2 0755-296093208062 0755-25723423 godox@godox. com GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial ZoneTangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com www.godox.com Made in China | 705-P120RH-00

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:
1. Before use, please read and understand these instructions and attentions. 2. Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps. 3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns. 4. When the lamp is on, it is forbidden to look directly at the lamp beads under any 5. circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately. 6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents. 7. This product is only suitable for use in -20 to 45 operating environment and normal humidity environment. 8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use. 9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components. 10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result. 11. Products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory. 12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet. 13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents. 14. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel. 15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying
22

case or in a ventilated dry place. 16 Do not place equipment near flammable and volatile solvents such as alcohol and gasoline. 17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock
or personal injury. 18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe
the dirt of the equipment. 19. This product complies with ROHS,CE,and FCC certification, please refer to the relevant
national standards for use and operation. 20. The safety instructions are formulated according to the strict testing of the factory, and
the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction. 21. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty. 22. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance. 23. Machine failures caused by non-standard operation are not covered by the warranty. keep these instructions!
23

Foreword
Thank you for purchasing a Godox product. Godox is proud to introduce the new P1200R Hard, a powerful KNOWLED LED light panel. With an output power of up to 1200W, it supports a voltage range of AC100V-240V, making it suitable for shooting scenarios worldwide. It features integrated light control, ultra-high brightness, precise brightness adjustment in increments, 4 dimming curves, a CCT range of 1800-10000K, 14 FX modes for different scenes, and various wireless control capabilities. It is perfect for largescale studios, film and television bases, broadcasting rooms, outdoor shoots, and other shooting environments.
Main Features
The built-in light control design not only saves space but also makes lighting more convenient. With its powerful 1200W output, it provides full power output across the entire CCT range. The light intensity can be smoothly adjusted from 100% to 0% in increments of onethousandth, allowing for precise control. Built-in RGB mode, utilizing five-color blending technology, easily achieving full-color light. The P1200R Hard features four dimming curves: linear, S-curve, exponential, and logarithmic. The CCT range is wide, adjustable from 1800K to 10000K. There are multiple color modes available, including CCT mode, HSI mode, RGBW mode, GEL mode, and X-Y mode. The P1200R Hard offers a variety of intelligent controls, including DMX 512 control, support for RDM protocol, LumenRadio CRMX control, network settings, Bluetooth control, and light body control. The efficient cooling fan, combined with a new heat dissipation design, meets the heat dissipation needs of large lighting fixtures. The P1200R Hard features 14 FX modes, including flash, lightning, clouds, broken bulb, TV, candle, fire, fireworks, explosion, welding, police car, SOS, RGB cycle, party.
Warning
High-power LED light. Do not stare at the light source or shine it directly into someone’s eyes. Do not plug or unplug the power cord when the power is turned on, otherwise personal injuries may occur. Do not cover the heat dissipation vent in working status. Keep out of reach of children. Please make sure to follow the instruction manual and correctly use this professional lighting device.
Don’t stare at a bright light source
24

Name of Parts

18 4 5 6 7 9 8

17

13

15

16

10

1

17

17 2 3

19

12 11

14

1.Lanyard End 2.AC Input Port 3.Power Switch 4.Display 5.PRESET Button 6.LOCK Button

7.MENU Button 8.MODE Button 9.Select Dial 10.USB Port 11.DMX OUT Port 12.DMX IN Port

13.Fan Vent 14.Yoke 15.Direction Adjusting Handle 1 16.Direction Adjusting Handle 2 17.Ring ×4 18.Handle 1

19.Handle 2

Installation Instructions for Yoke

1 Plastic Spacer

2 Metal Spacer

1. Install one side first: Place the luminaire vertically and insert a plastic spacer between the luminaire mounting hole and the yoke mounting hole.

2. Thread the screw post through the metal spacer and yoke mounting hole, tighten by rotating clockwise using the directional adjustment handle.

3. Install the other side: Install following the steps mentioned above.

25

Connect to DMX Controller

Wireless DMX Connection

CRMX

LumenRadio CRMX TX

CRMX

DMX512

CRMX

Wired DMX Connection DMX connection

DMX512

DMX connection

Note: DMX cable is sold separately.

DMX connection

26

Item List of P1200R Hard

Light Body × 1

Yoke × 1

Main Cable × 1

Metal Spacer × 2

Plastic Spacer × 2

Direction Adjusting Handle × 2

Safety Wire × 1

Instruction Manual × 1 DMX Practical Table × 1
Item List of P1200R Hard K1

Light Body × 1

Yoke × 1

Main Cable × 1

Metal Spacer × 2 Plastic Spacer × 2

Direction Adjusting Handle × 2
27

Carry Case × 1

Safety Wire × 1 Instruction Manual × 1

DMX Practical Table × 1

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

Power Switch
To turn on or off the device, connect the power supply and toggle the power switch button to the -‘ position to turn it on orO’ position to turn it off.

CCT Mode
To access the mode selection screen, press the MODE button briefly. Rotate the select dial to select the color temperature mode (CCT), and press the select dial briefly to enter the color temperature mode. Rotate the select dial to select brightness/CCT/ magenta-green adjustment. Press the select dial briefly to enter a specific setting. Rotate the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value.
The interface shows the following parameters: Brightness: 0%~100% (in increments of 0.1%) CCT: 1800K~10000K (in increments of 100K) Magenta-green: -100%~100% (in increments of 1%)
HSI Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the select dial to select the HSI Mode, and press the select dial briefly to enter the HSI Mode. Rotating the select dial allows you to adjust brightness/hue/saturation. Press the select dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value.
The interface displays the following parameters: Brightness: 0%~100% (in increments of 0.1%) Hue: 0°~360° (in increments of 1°) Saturation: 0%~100% (in increments of 1%)
28

CCT
85.2% 6500K

G/M

-80 %

HSI

85.2%

HUE

150°

SAT

100%

RGBW Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the select dial to select RGBW, and press the select dial briefly to enter the RGBW Mode. Rotating the select dial allows you to adjust brightness/red/green/blue/white color. Press the select dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value.
The interface displays the following parameters: Brightness: 0%~100% (in increments of 0.1%) Red: 0%~100% (in increments of 0.1%) Green: 0%~100% (in increments of 0.1%) Blue: 0%~100% (in increments of 0.1%) White: 0%~100% (in increments of 0.1%)

RGBW
85.2 %

100% 100% 100% 100%

GEL Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the select dial to select the GEL Mode, and press the select dial briefly to enter the GEL Mode. Rotating the select dial allows you to adjust brightness/gel type/gel group type/color /color temperature/hue/saturation. Press the select dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value.
The interface displays the following parameters: Brightness: 0%~100% (in increments of 0.1%) Gel Type: R-GEL/L-GEL Gel Group Type: Color Correction/CalColor/ Storaro Selection/Cinelux (R-GEL) Color Correction/Color Filters/600 Series/ Cosmetic Filters/700 Series (L-GEL) Color Temperature: 3200K or 5600K Hue: -10°-10° (in increments of 1°) Saturation: -20%~20% (in increments of 1%)

GEL
85.2 %

R-GEL Color Cor

3310 CCT 3200K

HUE 10° SAT 10°

29

X-Y Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the select dial to select the X-Y Mode, and press the select dial briefly to enter the X-Y Mode. Rotating the select dial allows you to adjust brightness/X-coordinate/Y-coordinate. Press the select dial briefly to enter a specific setting and then rotate the select dial to adjust the parameter.
The interface displays the following parameters: Brightness: 0%~100% (in increments of 0.1%) X-coordinate: 0.0000~0.8500 Y-coordinate: 0.0000~0.9500

X-Y

85.2%

X

Y

0.8500 0.8500

FX Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the select dial to select the FX Mode, and press the select dial briefly to enter the FX Mode. Rotating the select dial allows you to select from the following light effects: flash/ lightning/cloudy/ broken bulb/TV/candle/fire/firework/explosion/ welding/police car/SOS/RGBW/RGB cycle/party. Press the select dial briefly to enter a specific setting.
To select the desired lighting effect, briefly press the select dial to enter the lighting effect settings interface. Once the lighting effect is set, press the MODE button briefly to return to the previous level.
1.Flash
This light effect simulates the flash of a camera flash or a traditional flash bulb, often used to create a lively and dynamic atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed.Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
30

1.Flash
Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0°-360° Trigger: Auto/Manual Speed: 1-100 Mode: Camera Flash/Flash Bulb Note: If you select Manual mode, press the select dial briefly once to trigger the flash light effect.

2. Lightning
This light effect simulates the lightning of thunder, often used to create a tense, terrifying, or mysterious atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Color Temperature: 1800K-10000K Trigger: Auto/Manual Flashes: Random/1-10 Frequency: Random/2-20
Note: If you select Manual mode, press the select dial briefly once to trigger the lightning effect.

3. Cloudy
This light effect simulates the obstructive effect of clouds and is often used to create a gloomy, oppressive, or sad atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Brightness Ratio: 10-90 Speed: Random/1-100

4. Broken Bulb
This light effect simulates a flash from a broken bulb and is often used to create a dim, yellowish atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0°-360° Speed: 1-100

5.TV
This light effect simulates the lighting effect of a TV or screen and is often used to create a cold, mechanical, or digitized atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
31

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Speed: 1-100

6. Candle
This light effect simulates the lighting effect of a candle and is often used to create a soft, warm, and flickering atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100

7. Fire
This light effect simulates the lighting effect of a flame and is often used to create a bright, lively, and flickering atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100

8. Firework
This light effect simulates the lighting effect of firework and is often used to create a splendid, colorful, and romantic atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to enter an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100 Embers: 1-100

9. Explosion
This light effect simulates the lighting effect of an explosion and is often used to create a bright, intense, and flickering atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
32

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0°-360° Trigger: Auto/Manual Speed: 1-100 Embers: 1-100
Note: If you select Manual mode, press the select dial briefly once to trigger the explosion effect.

10. Welding
This light effect simulates the lighting effect of welding and is often used to create a hot and mechanical atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
11. Police Car
This light effect simulates the lighting effect of welding and is often used to create a hot and mechanical atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
12. SOS
This lighting effect simulates the flashing of an SOS distress signal and is commonly used to create a dangerous, distressing, or emergency atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
13. RGB Cycle
This lighting effect simulates the flashing of an SOS distress signal and is commonly used to create a dangerous, distressing, or emergency atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed.Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.
33

Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0°-360° Speed: 1-100
Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Colors: Red+Blue, Red, Blue, White+Blue, Yellow+Blue, Yellow, Red+Blue+White, Red+Yellow+Blue Speed: 1-5
Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0°-360°
Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Saturation: 0% to 100% (in increments of 1%) Speed: 1-100

14. Party
This lighting effect simulates the effects of colorful lights, flash lights, and lasers, and is commonly used to create a festive, joyful, highenergy atmosphere. Rotate the select dial to select a specific setting. Press the select dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Once you have finished setting the parameters, press the MODE Button briefly to return to the previous level.

Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Saturation: 0% to 100% (in increments of 1%) Speed: 1-100

Menu Settings

Press the MENU button briefly to enter the menu settings. Rotate the select dial to choose from DMX, CRMX, Bluetooth, Dimming Curve, Control Mode, Color Space, Fan, Display, Language, Version & Upgrade, Factory Reset, and Fixture Info.
34

001 Off Bluetooth Dimming Curves Control Mode Color Space Fan Display Language Version&Upgrade Factory Reset Fixture lnfo

1.DMX
Press the select dial briefly to enter the DMX settings interface. Rotate the dial to choose from Address/DMX Mode/RDM State/DMX Lost Status/Termination /Enhanced DMX Channel. Press the dial briefly to enter the option settings, and adjust the settings by rotating the dial as needed.

DMX

Address

001

DMX Mode 01:CCT 8 Bit

RDM State

On

DMX Lost

Hold Last Command

Termination

On

Extend DMX Channels On

35

Note: Please refer to the “P1200R Hard DMX Practical Table” to control the device by DMX/RDM. The electronic version can be downloaded from the official website https://www.godox.com.
36

2.CRMX
Press the select dial briefly to enter the CRMX settings interface. Rotate the dial to choose from CRMX On/Off and Reset. Press the dial briefly to enter a specific setting.
CRMX switch: Adjust the setting by rotating the select dial. CRMX reset: Set the reset function by briefly pressing the select dial. Once the settings are complete, press the MENU button briefly to return to the previous level.
Note: CRMX only has a receiving function.

CRMX

CRMX

On

Reset

Reset

Status

Unlink

3.Bluetooth
Press the select dial briefly to enter the Bluetooth settings interface. Rotate the dial to choose from Bluetooth On/Off and Bluetooth Reset, then press the dial briefly to enter a specific setting.
Bluetooth On/Off: Adjust the setting by rotating the select dial. Bluetooth Reset: Adjust the setting by rotating the select dial. Bluetooth MAC Address: Located in the lower right corner of the interface, making it easy to find the Bluetooth of the fixture. Once the settings are complete, press the MENU button briefly to return to the previous level.

Bluetooth

Bluetooth

On

Reset

Reset

MAC:1ABA

Download”GODOX Light”App
Scan the QR code to download the “Godox Light” smartphone App (can be used in Android and iOS).

Note: 1.The app can be used directly on the firstly installed device (smartphone or laptop). When change to other mobile device (smartphone or iPad), the light shall be reset before the normal connection of the app. 2.The app version should be 3.0 or above.
37

4.Dimming Curves
Press the select dial briefly to enter dimming curves setting interface. Rotate and press the select dial briefly to choose among linear, S-curve, exponential and logarithmic. Once the settings are complete, press the MENU button briefly to return to the previous menu.

Dimming Curves
Linear S-Cerve

Exp

Log

5.Control Mode
Press the select dial briefly to enter the control mode. Press the select dial briefly select the mode, rotate the select dial to choose the corresponding mode. Once the settings are complete, press the MENU button briefly to return to the previous menu.
Modes: Normal Frequency: 1-11.

Control Mode

Mode

Normal

Frequency

1

6.Color Space
Press the select dial briefly to enter the color space. Press the select dial briefly select the color space, rotate the select dial to choose the corresponding color space. Once the settings are complete, press the MENU button briefly to return to the previous menu. Color Space: Original Gamut, Correction Gamut, REC 709, and DCI-P3.

Color Space
Original Gamut

38

7.Fan
Press the select dial briefly to enter fan setting interface. Rotate and press the select dial briefly to choose among silent, auto, medium speed and high speed. Once the settings are complete, press the MENU button briefly to return to the previous menu.

Fan
OFF
Auto Med High

8. Display
Press the select dial to enter display setting interface. Rotate the select dial to select screen brightness/screen rotation. Press the select dial briefly to enter the settings. Rotate the dial to adjust the parameters. Once the settings are complete, press the MENU button briefly to return to the previous menu.
Display Brightness: 10-100 Display Rotation: Default, Inverted, Auto

Display

Brightness

80%

Orientation

Default

9. Language Press the select dial to enter language setting interface. Rotate and press the select dial briefly to select between Chinese and English. Once the settings are complete, press the MENU button briefly to return to the previous menu.
39

Language
English

10. Version & Upgrade
Press the select dial to enter version & upgrade setting interface to check the firmware version and upgrade instructions. Then, press the MENU button briefly to return to the previous menu.

Version & Upgrade

Insert the u disk with new firmware after power off,then reboot to upgrade the device.
V 0.10

Software Upgrade

1. Download the new firmware to the U disk from official website (https://www.godox.com.cn/firmware-continuous-light). 2. Turn off the device. Insert the U disk with new firmware into the USB Type-A port. 3. Turn on the device, and it will automatically enter the upgrade interface. 4. It will return to the main interface upon completion.
Notes: It is necessary to download the latest firmware from the official website and store it in the root directory of a USB flash drive. Only one BIN file should be present. 2. The USB-A port supports power supply with an output voltage and current of 5V/1.5A. Please do not connect high-power USB devices to it.

11. Factory Reset
Press the select dial briefly to enter factory reset setting interface. Rotate and press the select dial briefly to select apply or cancel. After selecting the factory reset, the brightness value will turn to 100%.

Version & Upgrade

Apply

Cancel

40

12. Fixture Info
Press the select dial briefly to enter fixture info setting interface to check model, UID NO., firmware version, light head temp., etc. Then, press the MENU button briefly to return to the previous menu.

Fixture Info
Model:P1200R Hard UID:0.85500005f6a Firmware version:V0.10 Light Head Temp:24

Lock Setting
Press the LOCK button briefly, the panel will be locked when < > is displayed on the panel, press the button briefly again to unlock the panel.

Preset Setting
Press the PRESET button briefly to enter preset effects interface. Rotate and press the select dial briefly to choose and enter preset effects 1-20, then press briefly to choose save or cancel. Once the settings are complete, press the select dial briefly to return to the previous menu and press the PRESET button briefly to exit. Note: If a group of presets has not been preset with a light effect, the interface does not show the application options.
41

Preset Apply Save Cancel

Maintenance
This product, except consumables, is supported with a one-year warranty. Unauthorized service will void the warranty. Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories. If the product had failures or got wet, do not use it until it is repaired by professionals. Shut down the device immediately should abnormal operation be detected.

Photometric Data

CCT

Testing Condition Unit

1800K

Lux

fc

2800K

Lux

fc

3200K

Lux

fc

4300K

Lux

5600K

fc Bare Light
Lux

fc

6500K

Lux

fc

8500K

Lux

fc

10000K

Lux

fc

1m 75900 7050 124000 11500 123000 11400 128000 11900 136000 12600 147000 13700 137000 12700 125000 11700

3m 9570 889 15500 1440 15400 1430 15900 1480 17100 1590 18500 1720 16900 1570 15600 1450

5m 3740 347 6090 566 6050 562 6240 579 6650 618 7160 665 6570 611 6040 561

7m 2090 194 3430 319 3400 316 3510 326 3760 349 4050 376 3710 344 3420 317

9m 1300 121 2170 201 2150 200 2220 206 2370 220 2550 237 2350 218 2160 201

The above data is not absolute and represents average values.All the above tests are based on the condition of 100% brightness.

42

Technical Data

Model Power Supply Max. Power CCT GM Adjustment Brightness Range Dimming Curves CRI TLCI Controlling Methods
Bluetooth Controlling Distance USB Type-A Port Working Environment Temperature Dimension(including yoke) Netweight(Light body+Yoke)

P1200R Hard 100V-240V~50/60Hz 1500W 1800-10000K -100%~100% 0-100 linear, S-curve, exponential, logarithmic 96 98 DMX 512 Control(support RDM protocol/LumenRadioCRMX)/ Bluetooth Control/Light Body Control Max. 30m Firmware Upgrade/5V 1.5A Power Supply -20 ~45
32.83″ × 23.86″ × 6.69″ 18.5kg

Specifications and data may subject to changes without notice.

43

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning
Operating frequency:2402MHz ­ 2480MHz (BT) Maximum EIRP Power: 5dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu- declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
44

( ) ( )

:

12

3

12

0755-29609320-8062

Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Customer Information
Seller Information
Note

Model
Name Address Name Contact Number Address Date of Sale

Product Code Number Contact Number
Note: This form shall be sealed by the seller.

Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Name Type
Circuit board

Parts

Battery

Other Items

Electrical parts e.g.battery charger, etc. Lamp body, lamp cover, locking device, package, etc.

Maintenance Period(month) 12
3
3
No

Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site
Without warranty

Godox After-sale Service Call +86-755-29609320(8062)

References

• GODOX Photo Equipment Co.,Ltd.
• GODOX Photo Equipment Co.,Ltd.
• Godox神牛 - 官方网站

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>