Godox LDP18Bi LED Video Light Instruction Manual

: May 15, 2024
: Godox

Table of Contents

LDP18Bi LED Video Light
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LDP18Bi LED Video Light

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equipment and
should be used by professional lighting engineers or under the guidance of professionals. Basic
safety attentions must always be followed during use, as follows:

Before use, please read and understand these instructions and attentions.
Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury due to
collision with lamps or private use of lamps.
This lighting product is not ordinary lighting product and cannot be used for general lighting.
Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as
LED lamp beads, to avoid burns,
When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstanc-
es. Strong light should be used under the guidance of professional lighting engineers. Avoid
prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off
the lamp in time, suspend use, and see a doctor immediately.
If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the
manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in
time to avoid accidents.
This product is only suitable for use in 10°C to 40°C operating environment and normal
humidity environment.
Do not use damaged equipment or accessories, and wait for professional maintenance
personnel to check and repair to confirm being normal before use.
During using, if the casing of this product is broken due to being dropped, squeezed or
subjected to strong impact, please do not use it, so as to avoid electric shock injury due to
contact with internal electronic components.
If an extension cord is required, please use an extension cord with a current rating greater than
or equal to that of the equipment. If an extension cord is rated less than the equipment,
overheating may result.
Some products have long power cords, please place the power cords properly and keep them
in a safe place, Avoid contacting the power cord with overheating surfaces, avoid improper
placement that could cause pulling damage, or trip on-site personnel. Please use the certified
power cord from the original manufacturer. If the product is damaged by using a non-certified
power cord, it will not be repaired by our factory.
Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in
use, do not pull the power cord to unplug the equipment. For normal power-off, please hold
both ends of the plug of the equipment with your hands and pull the plug out of power outlet.
This equipment needs to be connected to a grounded outlet.
This equipment is not waterproof, please keep it dry and do not immerse it in water or other
liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in
rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let
liquid flow into the lamp to avoid accidents.
Do not disassemble the product without permission, If the product fails, it must be checked
and repaired by authorized maintenance personnel.
Before storing, make sure that the equipment has cooled down completely. For storage,
unplug the power cord from the equipment. The equipment should be placed in the carrying
case or ina ventilated dry place.
Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
Do not use accessories that are not recommended by our factory to avoid fire, electric shock
or personal injury.
When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe
the dirt of the equipment.
Please take off the protective cover before using.
This product complies with ROHS, CE, KC, PSE and FCC certification, please refer to the
relevant national standards for use and operation.
The safety instructions are formulated according to the strict testing of the factory, and the
design and specifications of the equipment are subject to change without prior notice. For
latest product information, please check the GODOX website and view latest electronic
instruction.
Some products have built-in lithium batteries. Please use specified chargers, and use them
within a proper range of the specified voltage and temperature according to the correct
operating instructions.
Some products are battery powered. Do not use any batteries, power sources or accessories
not specified in the instructions for such products. Keep batteries and other accessories out of
‘the reach of children and infants, In the instance that a child or infant swallows a battery or
accessory, immediate emergency medical attention is required. If the battery leaks, becomes
discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be
careful during removal to avoid burns. Continued use could result in fire, electric shock, or
burns. Do not use any deformed or modified batteries. Do not disassemble or modify this
product or battery. Do not heat or solder the battery. Keep the battery away from fire or water.
Do not incorrectly insert the positive and negative ends of batteries, or mix old and new
batteries or batteries of different types together.
One-year warranty period, accessories such as consumable batteries, adapters, power cords,
etc. are not covered by this warranty.
If it is found that the equipment is repaired without authorization, the one-year warranty
period will be cancelled and relevant fees will be charged for maintenance.
Machine failures caused by non-standard operation are not covered by the warranty,

keep these instructions!

Foreword

Thank you for purchasing!

LED Video Light LDP18D/LDP18Bi is mountable on the top of a camera to provide soft lighting for
photography. With features such as various FX modes and adjustable brightness, they are quite suitable
for macro photography, wedding photography, still life photography, interview fill lighting, etc.

Main Features

Support DC power supply/NP-F battery power supply.
Stable output with 0% to 100% brightness range.
The CCT of LDP18Bi is adjustable from 2800K to 6500K.
LDP18D is incorporated with 22 FX modes, while LDP18Bi is incorporated with 31 FX modes,

Warning

Do not look directly at the lighting source.

This device is for professional use only.

Do not leave or store the product if the ambient temperature reads over 40°C.
Do not aim the light at anyone’s eyes. Otherwise, visual impairment may occur.

Please use our original power cable, product damages result from using of other power
cables are not covered in the warranty.

This appliance is not waterproof device. Keep it dry, do not immerse this appliance in water
or other liquids, Do not use this appliance in rainy, humid, dusty in overheated
environments.

Do not use the flash unit in the presence of flammable gases, chemicals and other similar
materials.

The lighting source of this device may only be replaced by the manufacturer, its service
agent or relevant qualified personnel.

1/4″ Serew Hole
Non-detachable Diffuser
NPF Battery Slot
Detaching Device
Power Switch Button
DC Input Port
FX Button
COT/FX Button (LOP18Bi)
FX Button (LDP18D)
D1M Dial
Display

Technical Data

Declaration of Conformity

GODOX Photo Equipment Co.,Ltd, hereby declares that this equipment are in compliance with the
essential requirements and other relevant provisions of Directive2014/35/EU,2014/30/EU. They are

allowed to be used in all EU member states.
For more information of DoC, Please click this web link:

https://www.godox.com/eu-declaration-of-conformity/

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause
undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.