KOHLER K-4713-RL Elongated Toilet Seat Owner’s Manual
- July 5, 2024
- Kohler
Table of Contents
KOHLER K-4713-RL Elongated Toilet Seat
Specifications
- Seat shape type: Elongated
- Seat front type: Closed-front
- Seat-mounting holes: 5-1/2″ (140 mm) apart
Product Information
This product is designed to securely hold the seat in position while allowing for easy removal for cleaning or adjusting the fit. The seat shape is elongated with a closed-front design.
Product Usage Instructions
Installation
- Ensure the toilet bowl is clean and dry.
- Place the seat over the bowl, aligning the mounting holes with the toilet bowl holes.
- Insert the bolts through the mounting holes and tighten the nuts securely underneath.
Removal and Cleaning
- To remove the seat for cleaning, simply unscrew the nuts underneath and lift the seat off.
- Clean the seat with a mild soap solution and a soft cloth. Avoid abrasive cleaners that may damage the surface.
- Once cleaned, reattach the seat following the installation instructions.
Features
- Grip-Tight installation hardware makes it easy to fasten the seat – everything is done from above the bowl
- ReadyLatch® hinge provides a positive lock/unlock latch to securely hold a seat in position, yet the seat easily removed for cleaning or adjusting the fit
- Quiet-Close™ elongated lid and seat prevent slamming
- Grip-tight bumpers hold the seat firmly in place
- Contoured seat for user comfort
- Color-matched plastic hinges
Material
- Plastic construction
Technical Information
All product dimensions are nominal.
- Seat shape type: Elongated
- Seat front type: Closed-front
- Seat-mounting holes: 5-1/2″ (140 mm)
Contact Us
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-21-2024 22:59 – US
FAQ
Q: Can I use abrasive cleaners on the seat?
A: It is recommended to avoid abrasive cleaners as they may damage the surface of the seat. Instead, use a mild soap solution and a soft cloth for cleaning.
Q: How do I adjust the fit of the seat?
A: To adjust the fit of the seat, simply loosen the nuts underneath, reposition the seat as needed, and then tighten the nuts securely to hold it in place.
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER