cuisinart GAS9456AS, GAS9456ASO Deluxe Four Burner Gas Grill Instruction Manual

cuisinart GAS9456AS, GAS9456ASO Deluxe Four Burner Gas Grill

Shop genuine replacement parts for CUISINART GAS9456AS

Model: GAS9456AS / GAS9456ASO

ASSEMBLY INSTRUCTIONS:

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL.

WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT.

The following tools are required to assemble this Cuisinart 4 Burner Gas Grill:

• Phillips Screwdriver

PARTS LIST:

Note: Most hardware is pre-attached to the grill. You may need to loosen some screws partially while others may need to be removed in order to assemble parts. The screws that you remove will be re-used so don’t misplace this hardware.

Extra screws are included in a small bag with the owners manual.

Step: 1

• Loosen 6 screws 3-4 turns
• Do not remove screws
• Attach FRONT PANEL using keyholes
• Tighten 6 screws

NOTE : Before tightening keyhole screws, make sure panels are aligned.

Step: 2

• Loosen 3 screws
• Attach SIDE PANEL -4
• Tighten 3 screws on SIDE PANEL 4

Step: 3

• Loosen 2 screws
• Attach LEFT SIDE PANEL
• Tighten 2 screws on LEFT SIDE PANEL

Step: 4

• Remove 6 screws.
• Attach CART BRACE. 6
• Tighten two screws on CART BRACE. 6

Step: 5

• Attach CART BASE 7
• Make sure TANK
• BRACKETS are on this end. (See drawing below)
• Tighten 4 screws (Removed from Step 4)

Step 6

• Loosen 6 screws
• Attach BACK PANEL 9
• Tighten 4 screws
• Remove 6 screws

Step: 7

• Attach CART BASE 7 to back legs
• Tighten 4 screws (Removed from Step 6)

Step: 8

• Attach LEFT SIDE PANEL 5 and CART BRACE 6
• Tighten 4 screws

Step: 9

• Lock CASTERS
• Attach CASTERS to legs

Step: 10

• Set cart upright on CASTERS

Step: 11a

• Loosen 2 bottom screws

Step: 11b

• Install BAR
• Tighten 2 screws

Step: 12

• Set GRILL BODY on cart

Step: 13

• Remove 3 screws
• Align GRILL BODY to cart
• Rotate CART BRACKETS upwards and tighten 4 screws

Step: 14

• Remove 3 screws
• Align GRILL BODY to cart
• Rotate CART BRACKETS upwards and tighten 4 screws

Step: 15

• Remove 3 screws and washers

Step: 16

• Loosen 4 screws
• Attach parts and tighten screws

Step: 17

• Loosen 4 screws
• Attach LEFT SIDE TABLE using keyholes
• Do not tighten screws at this point in time

Step: 18

• Install screw and tighten. (screw was removed in Step 13)

Step: 19

• Install screw and washer. (screw and washer were removed in step 15) Do not tighten screw at this time.
• Make sure panels are aligned
• Tighten 5 screws from Step 17 & 19

Step: 20

• Loosen 4 screws.
• Attach RIGHT SIDE TABLE using keyholes.
  Do not tighten 4 screws at this time.

Step: 21

• Install screw and tighten (screw was removed in step 14)

Step: 22

• Install screw and washer (screw and washer were removed in step 15) Do not tighten screw at this time.
• Make sure panels are aligned and tighten 5 screws from Step 20 & 22

Step: 23

• Install screw (removed in step 15)

Step: 24a

• Remove WING NUT and remove burner. Install SIDE BURNER VALVE in control panel
• Rotate valve and tighten 2 screws to lock into place (see diagram step 24b below)
• Install burner and make sure BURNER VENTURI fi ts over VALVE NOZZLE
• Tighten WING NUT

Step: 24b

• Install SIDE BURNER KNOB

Step: 25a

• Attach WIRE CLIP to side burner

Step: 25b

Step: 26

• Attach IGNITOR WIRE to ELECTRODE

Step: 27

• Install SIDE BURNER GRATE

Step: 28

• Loosen 2 screws
• Attach HEAT SHIELD and tighten screws

Step: 29

• Install GREASE TRAY and GREASE CUP through back of grill

Step: 30

• Install HEAT TENTS,COOKING GRATES and WARMING RACK

Model: GAS9456AS Assembled

©2018 The Boltz Group LLC
Addison, Texas 75001 U.S.A

Specifications:

• Model: GAS9456AS
• Type: Deluxe Four Burner Gas Grill
• Manufacturer: Cuisinart
• Number of Burners: 4
• Assembly Required: Yes

Frequently Asked Questions (FAQ):

Q: Are additional screws included with the grill?

A: Yes, extra screws are included in a small bag along with the owner’s manual.

Q: Is assembly of the grill a one-person job?

A: It is recommended to have two people work together when assembling this unit for ease and safety.

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Cuisinart Grill Parts - Select From 154 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>