Landmann 82443 8 Ft. Firewood Rack with Cover Owner’s Manual
- July 6, 2024
- LANDMANN
Table of Contents
Landmann 82443 8 Ft. Firewood Rack with Cover
Product Specifications
- Product Name: 8 Ft. Firewood Rack with Cover
- Model Number: 82443
- Assembly Time: 20 minutes
- Manufacturer: Landmann USA
- Country of Origin: China
Product Usage Instructions
Assembly Instructions
For easiest assembly, follow the steps below
- Insert the side frame legs [AB] into the side frames [AA] and assemble using (2) 1.6 IN. bolts [J], small washers [K], and small hexnuts [L] per leg. Assemble (2) side frame legs per side frame. Tighten bolts securely
- Assemble the side frames and (6) bottom frames [BB] by inserting a cross bar [C] between each assembly point. Use (2) 3.1 IN. bolts [D], large washers [E], and large hexnuts [F] at each assembly point. Tighten bolts securely.
- Place cover [G] on firewood and rack. Make sure the cover straps are securely tied around both the side frame leg [AB] and the bottom frame [BB]. The door flap has 6 straps, tie these straps with the cover straps to keep the door flap closed.
Parts List
| Part | Description | Quantity |
|---|---|---|
| AA | SIDE FRAME | 2 |
| AB | SIDE FRAME LEG | 4 |
| BB | BOTTOM FRAME | 6 |
| C | CROSS BAR | 4 |
Frequently Asked Questions (FAQ)
-
Q: How do I contact customer service for assistance?
- A: You can contact Landmann USA customer service at customerservice@landmann-usa.com or by calling 1-800-321-3473, Monday to Friday, 8 AM to 5 PM Eastern Time.
8 FT. FIREWOOD RACK with COVER
Assembly and Use
Instructions for Model
82442
82443
VER. 4, 5/24/2012
READ FIRST! RULES FOR SAFE USE
- USE THE FIREWOOD RACK ONLY ON FLAT SURFACES.
- THE FIREWOOD RACK IS RECOMMENDED FOR USE ON A HARD SURFACE SUCH AS A CONCRETE PATIO OR GRAVEL.
- CAUTION! IF USED ON AN UNSTABLE SURFACE, THE FIREWOOD RACK MAY TIP OVER.
- CAUTION! DO NOT DROP OR SLAM WOOD IN THE FIREWOOD RACK.
- CAUTION! DO NOT MOVE THE FIREWOOD RACK ONCE WOOD HAS BEEN LOADED.
Parts List
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| AA | SIDE FRAME | 2 |
| AB | SIDE FRAME LEG | 4 |
| BB | BOTTOM FRAME | 6 |
| C | CROSS BAR | 4 |
| D | 3.1 IN. BOLT | 16 |
| E | LARGE WASHER | 16 |
| F | LARGE HEXNUT | 16 |
| G | COVER | 1 |
| J | 1.6 IN. BOLT | 8 |
| K | SMALL WASHER | 8 |
| L | SMALL HEXNUT | 8 |
Thank you for your purchase of the 8 Ft. Firewood Rack with Cover . At
Landmann USA, we strive to provide you with an easy to use, easy to assemble
product. Should you have questions, issues, a defective part or if you have
any questions concerning its use, please contact us at: customerservice
@landmann-usa.com
-OR-
- 1-800-321-3473 M-F 8-5 Eastern Time
- Proof of purchase may be required.
- Landmann® Limited
- Distributed by Landmann® USA
- Cartersville, GA 30120
- www.landmann-usa.com
- Made in China
- © 2012 Landmann USA
ASSEMBLY INSTRUCTIONS
For easiest assembly, follow the assembly steps in this order.
A Phillips screwdriver and an adjustable wrench are needed for assembly.
Assembly time: 20 minutes
- STEP 1 Insert the the side frame legs [ AB ] into the side frames [ AA ] and assemble using (2) 1.6 IN. bolts [ J ], small washers [ K ] and small hexnuts [ L ] per leg . Assemble (2) side frame legs per side frame . Tighten bolts securely.
- STEP2 Assemble the side frames and (6) bottom frames [ BB ] as shown inserting a cross bar [ C ] between each assembly point . Use (2) 3.1 IN. bolts [ D ], large washers [ E ] and large hexnuts [ F ] at each assembly point . Tighten bolts securely.
- STEP3 Place cover [ G ] on firewood and rack. Make sure the cover straps are securely tied around both the side frame leg [ AB ] and the bottom frame [ BB ].
The door flap has 6 straps . Tie these straps with the cover straps to keep the door flap closed.
References
- USA Location information - USA.com
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Landmann Fireplace Parts - Select From 49 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>