LANDMANN 28305 Northwoods Outdoor Fireplace Instruction Manual

LANDMANN 28305 Northwoods Outdoor Fireplace

Other Models

• Model 28305
  

FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY AND OPERATING INSTRUCTIONS BEFORE USE.

READ FIRST! RULES FOR SAFE OPERATION

• A LAYER OF SAND, 1” TO 1 1/2” THICK MUST BE ADDED TO THE BOTTOM OF THE FIRE BOWL TO HELP PROTECT AGAINST THE CORROSIVE NATURE OF THE ASHES.
• THIS OUTDOOR FIREPLACE IS FOR OUTDOOR USE ONLY!
• USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES.
• DO NOT USE ON LAWNS OR WOODEN DECKS.
• KEEP THE OUTDOOR FIREPLACE AWAY FROM BUILDINGS, FLAMMABLE ITEMS AND VEHICLES.
• THE OUTDOOR FIREPLACE IS FOR ADULT USE ONLY.
• DO NOT MOVE THE OUTDOOR FIRE PLACE WHILE IT IS BEING USED.
• DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
• DO NOT USE IN WINDY CONDITIONS.
• DO NOT OVERLOAD OR USE TO BURN LEAVES OR GARBAGE.
• KEEP THE SPARK SCREEN IN PLACE WHILE USING.
• USE CAUTION WHEN REMOVING THE COVER, AS HOT STEAM OR A FLARE UP COULD CAUSE BURNS.
• BEFORE EACH USE, MAKE SURE THE OUTDOOR FIREPLACE IS IN GOOD WORKING CONDITION.
• USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED- SURFACES WILL REMAIN HOT FOR SOME TIME.
• BE SURE ALL COALS ARE COLD BEFORE EMPTYING. IF NECESSARY POUR WATER ON COALS.

Parts and Quantities

Assembly Instructions

You will need these tools for assembly:
Medium phillips or flathead screw driver, pliers or small adjustable wrench.

Step 1 Unpack all parts from the carton.
Step 2 Align leg (A) holes with holes in fire bowl (B) ( Figure 1 ). Insert four M6 x 30 bolts and secure with M6 nuts. Tighten nuts with wrench ( Figure 2 ).


Step 3 Attach front and back ring sections (C) to fire bowl using four M6 x 12 bolts and secure with M6 nuts. Tighten nuts with wrench ( Figure 3 ).

Step 4 Attach side ring sections (CC) using four M6 x 12 bolts and secure with M6 nuts. Tighten nuts with wrench ( Figure 4 ).

Step 5 Attach two side screen panels (J) to back screen panel (G) using four M6 x 12 bolts and secure with M6 nuts. Tighten nuts with wrench ( Figure 5 ).

Step 6 Align holes of flat bar (D) to side screens and attach with two M6 x 12 bolts and secure with M6 nuts. ( Figure 6 ).

Step 7 Attach top screen / front screen panel (F) to screen assembly using four M6 x 12 bolts and secure with M6 nuts ( Figure 7 ).


Step 8 Make sure all bolts are securely tightened.
Step 9 Place screen assembly on fire bowl.
Step 10 Enjoy!

Maintenance

The Northwoods Outdoor Fireplace may be cleaned with water and mild detergent. Periodic maintenance is required to return painted steel surfaces to original appearance. Remove any rust with sandpaper or steel brush. Repaint with grill paint for high temperature surfaces. Follow paint manufacturerʼs instructions.

Customer Support

Congratulations on your purchase of the Northwoods Outdoor Fireplace! At Landmann USA, our goal is to provide products that are easy to assemble and fun to use. Should you have questions, issues, a defective part or if you have any questions concerning its use, please contact us at:
[email protected]
-OR1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.
Landmann USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2007 Landmann USA

Downloaded from www.Manualslib.com manuals search engine

Shop genuine replacement parts for Landmann 28305
Find Your Landmann Fireplace Parts – Select From 49 Models

If you have any questions or need assistance, please contact us at:
1-800-321-3473 or at customerservice @landmann-usa.com

References

• USA Location information - USA.com
• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Landmann Fireplace Parts - Select From 49 Models

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>