Peg Perego IGCD0524 Foot Pedal Mini Loader User Guide

: July 6, 2024
: Peg Perego

Table of Contents

Peg Perego IGCD0524 Foot Pedal Mini Loader
Product Usage Instructions
FAQ
Parts
Product Information
ASSEMBLY INSTRUCTIONS
VEHICLE MAINTENANCE AND SAFETY
SAFETY
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Peg Perego IGCD0524 Foot Pedal Mini Loader

Specifications:

Model: IGCD0524
Age Range: 2-4 years
Weight Capacity: 50 lbs

Product Usage Instructions

Assembly Instructions:

CAUTION: Adult assembly is required. Use care when unpacking as components to be assembled may pose a small parts/sharp edge hazard.

Vehicle Maintenance and Safety:

This product complies with EN 71 safety standard for toys. The vehicle is not intended for use on streets, around traffic, or parked cars. It meets and/or exceeds all ASTM Toy Safety Standards, including F963 Consumer Toy Safety Specifications.

Safety Precautions:

WARNING: Follow all safety guidelines provided in the manual. Always supervise children during use. Do not use the vehicle near traffic or parked cars.

Customer Service:

Peg Perego offers after-sales services through authorized service centers for repairs or replacement parts. Refer to the\ instruction manual for contact information.

FAQ

Q: What is the weight capacity of the Peg-Perego IGCD0524?
- A: The weight capacity of the Peg-Perego IGCD0524 is 50 lbs, suitable for children aged 2-4 years.
Q: Where can I find genuine replacement parts for the Peg-Perego IGCD0524?
- A: You can shop for genuine replacement parts for the Peg-Perego IGCD0524 through Appliance Factory Parts or authorized service centers.
Q: Is assembly required for the Mini Loader IGCD0524?
- A: Yes, adult assembly is required for the Mini Loader IGCD0524. Use caution when unpacking as some components may pose hazards.

Parts

Product Information

PEG PEREGO® thanks you for choosing this product. For over 50 years, PEG PEREGO has been taking children for an outing: first with its famous baby carriages and strollers, later with its pedal and battery operated toy vehicles.
Read this instruction manual carefully to learn the use of the vehicle and to teach your child safe and enjoyable driving. Please keep this manual for use as a reference in the future.
Our toys conform with the safety requirements provided by the Council of the EEC, of the T.Ü.V.; of the I.I.S.G. Istituto Italiano Sicurezza Giocattoli, and the U.S. Consumer Toy Safety Specification F963. Peg Perego S.p.A. is an ISO 9001 certified company. The fact that we are certified provides a guarantee of our honesty for our customers, and fosters trust in the company’s way of working.
Peg Perego reserves the right to modify or change its product. Price, literature, manufacturing processes or locations or any combination of the above mentioned entities may change at any time for any reason without notice with impunity.

Years 2-4 Weight capacity 50 lbs

CUSTOMER SERVICE

PEG PEREGO offers after-sales services, directly or through a network of authorized service centers for repairs or replacement parts. See the back cover of this instruction manual for contact information.

ASSEMBLY INSTRUCTIONS

CAUTION:

ADULT ASSEMBLY REQUIRED. USE CARE WHEN UNPACKING AS COMPONENTS TO BE ASSEMBLED MAY POSE A SMALL PARTS/SHARP EDGE HAZARD.

ASSEMBLY

Unscrew the 2 knobs under the seat.
Position the seat as shown in the figure.
IMPORTANT: the seat can be adjusted to 2 positions depending on the height of the child (see figure). Position 1: the seat is higher and further back. Position 2: the seat is lower and further forward.
Turn the vehicle on its side, keeping the seat in position. Unscrew the chain cover under the vehicle.
Open the cover to access the seat fixing screws.
Screw on the two seat fixing knobs as shown in the figure. Close and screw on the cover.
Snap on the 2 rear lights.
Press on the 2 headlights as shown in detail A.
Position the steering wheel. Fix the steering wheel with the screw and washer provided.
Push on the steering wheel cap as shown in the figure.
Place the handlebar on the loader arms, slanting it downward slightly in order to correctly position the two pins on the handlebar (see detail in the next figure).
The two pins on the handle must be kept on the outside of the hooks that protrude from the loader arms.The figure shows one of the two pins in both the wrong position (NO) and the right position (OK).
Insert the tabs on the front part of the handlebar into the openings in the loader arms.
Fasten the handlebar using the screws and nuts, inserting the nuts into the hexagonal housings inside the loader arms, and the screws through the circular holes from the outside. (The figure shows the bottom of the loader arms).
Finish fastening the handlebar by holding the nuts in place while tightening the screws.
Insert the rod for the shovel command lever into the hole in the shovel.
Place a large stud in the special tool (see detail\ A).
Fasten the rod by pushing the stud all the way in. (If this is difficult to do, use a hammer).
Press the two loader-arm rests into place on the sides of the grill, as shown in the figure.The two pieces are shaped to fit the grill, so make sure to position them carefully, inserting the pin marked “L” on the left and the pin marked “R”on the right.
Remove the pin that fastens the loader to the tractor from the loader arms, as shown in the figure.
Place the loader on the tractor, lining up point A on both sides with the previously attached \rests. Press on the back of the loader arms on both sides to fasten them at point B.
Push the pin that fastens the loader to the tractor through its hole and out the opposite side of the tractor.
Place a small stud in the special tool (see detail A).
Fasten the pin by pushing the stud all the way in. (If this is difficult to do, use a hammer).
To dump the slovel, lower the lever.
To lower the entire loader, push the handlebar forward.

VEHICLE MAINTENANCE AND SAFETY

This product conforms to EN 71 the safety standard for toys. This vehicle is not intended for use on streets, around traffic or parked cars.
This product meets and/or exceeds all ASTM TOY SAFETY STANDARDS, including F 963, Consumer Toy Safety Specifications.

MAINTENANCE AND CARE

Regularly check the conditions of \the vehicle. In case of fault, do not try to use the vehicle. For repair use only original PEG PEREGO’s\ spare parts.
PEG PEREGO assumes no liability if the product as been tampered with.
Do not leave vehicle near sources of heat such as radiators, stoves, fireplaces, etc.
Protect vehicle from water, rain, snow, etc.
Periodically lubricate (with a light weight oil) moving parts, such as wheel bearings, steering linkages, and chains at points of rotation or where they come in contact.
The vehicle’s surface can be cleaned with a dampcloth.Do not use abrasive cleaners.The cleaning must be carried out by adults only.
Never disassemble the vehicle’s mechanisms unless authorized by PEG PEREGO.

SAFETY

WARNING!

THE CAR MUST BE USED UNDER ADULT SUPERVISION.

Not suitable for children under the age of 2 years.The small pieces could be swallowed or inhaled.
Never use the vehicle on steep slopes, near steps or stairs, in the middle of traffic or between parked cars.
Children should always wear shoes when riding in or driving a ridein/ ride-on vehicle.
Do not allow children to place their hands, feet or any part of their body, clothing or other articles near the moving parts while vehicle is in operation.
Never use gasoline or other flammable substances near the vehicle.
The vehicle is constructed just for one child.