Peg Perego Ride Strollers with Me Board Instructions
- June 8, 2024
- Peg Perego
Table of Contents
Peg Perego Ride Strollers with Me Board
INTRODUCTION
Thank you for choosing a PegPerego product. Ride with me board may be fastened to the following pushchairs Book, Book For Two, Booklet, Ypsi, Futura, Unico, GT4. or more information, consult our website: www.pegperego.com
WARNING
- This product is suitable for transporting 2-year-old children weighing no more than 22 kg (48.5 lbs), whichever comes first.
- Do not use this product for a number of occupants exceeding that envisaged by the manufacturer.
- The product must be assembled by adults.
- Do not use if any parts are missing or broken Do not hang weights off the handlebar.
- Do not let the passenger on the footboard lean on the handlebar.
- Follow the instructions for use set out in this manual.
- Before use, make sure that all the attachments are properly fastened.
- When opening and closing, make sure your child is at a safe distance to avoid injury.
- This product is not a toy. Do not let your child play with this product.
- Use only spare parts supplied or recommended by the manufacturer/distributor.
- Do not use accessories that have not been approved by the manufacturer.
- This product is not suitable for running or skating. Do not use the footboard as a skateboard to push the stroller.
- This product was designed for use in combination with PegPerego products.
- For more information, consult our website: www.pegperego.com
INSTRUCTIONS FOR USE
- Unfasten the basket from the gray buttons placed on the rear bar.
- Attach the adapters to the chassis as shown until it clicks into place.
- When fastening the adapters, make sure they are assembled with the arrows showing and pointing toward the central pedal.
- Remove the screws from the two footboard brackets Slip the brackets over the adapters.
- If present, the lower part of the brackets should be placed over the tube that connects the two brake levers .
- The bracket pin must be positioned as shown
- Finally, fasten the two brackets by tightening the two screws removed earlier.
- Fasten the basket to the gray buttons placed on the rear bar of the frame.
- Fasten the wheels to the footboard, inserting the pin in the special slot under the board.
- Check it has engaged correctly by pulling the wheels slightly outward.
- Extend both footboard extensions by pulling them as shown until you hear them click .
- Fasten the footboard to the two brackets, ensuring it clicks into place
- To ensure the footboard has engaged properly, check for the color green
- The footboard was fastened correctly
- It is possible to set the footboard to “idle” without removing it from the frame
PEG PEREGO S.p.A.
PegPerego SpA adopts a quality management system certified by TÜV Italia Srl
in accordance with the ISO 9001 standard. PegPerego can make changes at any
time to the models described in this publication for technical or commercial
reasons.
PEG PEREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only use genuine PegPerego spare
parts. For any repairs, replacements, information on the products and sales of
genuine spare parts and accessories, contact the PegPerego Assistance Service
and state the serial number of the product, if present. tel.
0039/039/60.88.213 e-mail
customer.[email protected] website
www.pegperego.com All intellectual property rights
on the contents of this manual are property of PegPerego S.p.A. and are
protected by the laws in force.
- USA
- tel. 800.671.1701
- fax 260.471.6332
- call us toll-free 1.800.671.1701
- website www.pegperego.com
- CANADA
- tel. 905.839.3371
- fax 905.839.9542
- call us toll-free 1.800.661.5050
- website www.pegperego.com