CarPlayKits CP1 Wireless CarPlay Kits User Manual
- July 5, 2024
- CarPlayKits
Table of Contents
Cp1
User Manual
Wireless CarPlay Kits
The ultimate copilot.
Designed in USA
Thank you for using our product.
Please read the manual carefully before use.
READ ME FIRST
Cp1
CarPlay is a smarter, safer way to use your iPhone while you drive. You can
get directions, make calls, send and receive messages, and enjoy your favorite
music. All on your car’s built-in display. And CarPlay now features more app
categories and custom wallpapers for your CarPlay Dashboard.
This CarPlay Kits is designed for iPhone to use Apple CarPlay wirelessly on
factory car multimedia system which has built-in wired Apple CarPlay.
The ultimate copilot.
What’s in the box
- Wireless CarPlay Kits *1
- User manual *1
Interface and connector
Function: Convert OEM Apple CarPlay to wireless Apple CarPlay
Compatibility: Car: with OEM Apple CarPlay
Control: OEM touch screen, steering wheel, and joystick control
Input Power: USB 5V~1A
Connectivity: Wi-Fi & Bluetooth
Operating Temperature: -25°C to +65°C
Connection diagram
NOTE!
The CarPlay Kits should be plugged into the Factory USB C port
USB port that is for wired Apple CarPlay connecting if there are multi USB
ports in your car.
How to set up wireless CarPlay
- Start the car and wait for the car engine system to load. Keep your phone’s Bluetooth and Wi-Fi enabled and not connected to any other signals.
- Connect the Wireless CarPlay Kits to your vehicle’s Type-A port with Apple CarPlay functionality. Note that if your car has more than one port, make sure to plug the Wireless CarPlay Kits into the Type-A port of the wired CarPlay. With a diagram of the data transfer ports, some of the ports will be wrapped in a white wire frame.
- Open the Bluetooth interface of the mobile phone, find the Bluetooth signal of the Wireless CarPlay Kits ” ”, Click pairing, Cp1-**** the phone will prompt “Bluetooth pairing request”, click all prompts “allow”, wait a few seconds to connect successfully. [Most will automatically access whether the phone matches, no need to manually click.]
- The Wi-Fi of the iPhone will automatically connect to the Wi-Fi signal ” ” of the Cp1-**** Wireless CarPlay Kits. Do not connect to it or any other Wi-Fi signals at this time. Please ensure that the Wi-Fi is not connected to other Wi-Fi signals.
- When the car screen switches to the CarPlay control interface, it means that the connection has been successful.
- After the intial pairing, when you use the Wireless CarPlay Kits again, it will automatically connect to your iPhone [ensure that your phone’s Wi-Fi and Bluetooth are enabled]. In certain cars, you may need to tap the CarPlay icon on your car’s display to initiate the connection.
Cyan status: Power on indicator
Green status:
- CarPlay connecting[green light fast flashing]
- CarPlay connected[green light slow flashing]
How to update or report
The CarPlay Kits works properly, it means the current version is suitable for
your car. lt is not recommended to update the firmware.
-
Power up the CarPlay Kits.
-
Connect the CarPlay Kits WiFi the password is “12345678”.
-
Open web browser and enter”192.168.1.101″ to enter the setting page and click”Online Update”for CarPlay function.
-
Return to the browser’s page Click “upgrade”.
[PS: When the update progress bar reaches 100%, the system automatically restarts and upgrades. During the system upgrade process, please do not power off.] -
On the same page, you could also fill in the car brand,model,years,and more details, next tap “Submit to” to report the issue. Our engineers will record your problem and research possible solutions.
Common FAQs
We’ve collected the following FAQ’s from years of helping clients achieve
success.
https://www.carplaykits.com/en-us/common-faqs
Downloads
Download the latest software updates from
carplaykits.com.
Product firmware, software upgrades and standalone applications.
https://www.carplaykits.com/en-us/download
Important Notes
The unit corresponds to all relevant directives of the EU is therefore marked
with.
-
The unit is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity.
The admissible ambient temperature range is -25°C to +65°C.. -
For cleaning only use a dry, soft cloth; never use water or chemicals.
-
No guarantee claims for the unit and no liability for any resulting personal damage or material damage will be accepted if the unit is used for other purposes than originally intended, if it is not correctly installed, or if it is not repaired in an expert way.
If the unit is to be put out of operation definitively, take it to a local
recycling plant for a disposal which is not harmful to the environment.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and
5.65 to 5.85 GHz bands. These radar stations can cause interference with
and/or damage this device. No configuration controls are provided for this
wireless equipment allowing any change in the frequency of operations outside
the FCC grant of authorization for US operation according to Part 15.407 of
the FCC rules.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The ultimate copilot.
E-mail: carplaykits@carplaykits.com
Website: www.carplaykits.com
CarPlayKits’s operates a policy of continuous research and development.
The introduction of new materials or manufacturing methods will always equal
or exceed the published specifications.
All specifications are subject to change without notice.
Copyright © 2024 CarPlayKits. All rights reserved.
Designed in USA
Documents / Resources
|
CarPlayKits CP1 Wireless CarPlay
Kits
[pdf] User Manual
CP1-KITS, 2BGRW-CP1-KITS, CP1 Wireless CarPlay Kits, CP1, CP1 CarPlay Kits,
Wireless CarPlay Kits, Wireless Car Kits, Car Kits
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>