BANPESTT 2024 Bug Zapper Outdoor Indoor User Manual
- June 17, 2024
- BANPESTT
Table of Contents
BUG ZAPPER
Model: LT903
User manual
Introduction
- The highly efficient fitting tube emits special ultraviolet waves and attracts insects. The flying insects are trapped and electrocuted by the electrically charged metal grids.
- The device is environmentally safe and hygienic,smoke-free and non-toxic. It does not include pesticides.
First-time use
- Please pay special attention to check the status of the dusk to dawn sensor cover cap.
- When the sensor cap is covered (light sensor not working): The device will remain in working condition as long as it is powered on.
- When the cover is opened (light sensor is activated): The device will automatically turn off within 10 seconds after each power on, if you are in daylight or a brighter environment.
Precautionary Note
- If the device is damaged,do not use it.
- The built-in bulb is harmless to people, pets or plants.
- Hang or place the appliance out of the reach of children.
- Don’t use in inflammable and explosive locales and alike.
- Avoid rough shaking that could damage the bulb or components.
- IPX4 waterproof design,but don’t directly splash water onto the grid.
- Before cleaning and replacing the bulb, unplug the power and let it sit for a few minutes.
- Do not dismantle any fixed parts of the equipment for internal adjustments,to avoid the risk of electric shock.
- Don’t intend to touch internal high voltage grids because electric shock danger. Never put metal objects inside the grid during using.
- For optimal performance, please read this manual carefully before use.
Replacement Bulb Guide
- Please prepare a new light bulb, model 2G11-18W (available on Amazon).
- Disconnect the device from the power source.
- Pull out the bottom tray.
- Use a screwdriver to unscrew the plastic component fixed at the bottom.
- Please unscrew the plastic component as indicated by the arrow.
- Pull out the old light bulb from the socket.
- Insert the new light bulb into the socket.
- Reinstall all components.
Parameters
Rated input voltage: AC100-123V
Frequency: 50Hz/60Hz
Rated power: 20W
Light source type: UV mosquito trap fluorescent tube (wavelength 365nm)
Electric shock net: 4000V
Waterproof level: IPX4
Shell material: ABS plastic
Grid spacing: 0.28”
Coverage area: 1/2 acre
Product size & weight: 6.8°L*6.8″W” 11″H/1.98 pounds
Guarantee
- We appreciate your feedback and will do our best to guarantee you satisfaction.
- Please email us with your order number or contact us on Amazon. Your inquiries will be taken care of as soon as possible.
- This warranty does not cover normal wear of the product and damage caused by misoperation by the buyer.
Troubleshooting
| Problern (A) | Possible Cause (A) | Correction (A) |
|---|---|---|
| A. The light is not on. | 1. The cap of the light sensor is in an open state. |
1. Cover the light sensor cap,the device will remain in operational mode.
2. The bulb became loose during transportation.| 2. Remove the light bulb
and reinstall it.
3. The entire main unit is faulty.| 3. Contact customer service to arrange
for an exchange.
Problem(B)| Possible Cause(B)| Correction(B)
B. The light is on,but it doesn’t catch insects.| 1. The grid has no power.|
1. Professional equipment testing is recommended,or contact customer service
for assistance. (Don’t touch with hands.)
Problem(C)| Possible Cause(C)| Correction(B)
C. Intermittent or continuous sparking between grid roads.| 1. The grid is
blocked by raw materials.| 1. Clean the grid with the provided small
brush.(Don’t connect the power during the cleaning process!)
Made in China
Documents / Resources
|
BANPESTT 2024 Bug Zapper Outdoor
Indoor
[pdf] User Manual
2024 Bug Zapper Outdoor Indoor, 2024, Bug Zapper Outdoor Indoor, Zapper
Outdoor Indoor, Outdoor Indoor, Indoor
---|---