Smartwatch SKY-9 Smart Wristband User Guide
- June 12, 2024
- Smartwatch
Table of Contents
- Wear it properly
- Charge the bracelet
- Install the bracelet app on your phone
- Device connection
- Bracelet function description
- Clock interface
- Music control
- voice assistant
- Dual mode switch
- Custom dial
- Sleep mode
- Information mode
- Stopwatch function
- Weather
- APP function and settings
- Application push
- Alarm setting
- Looking for a bracelet
- Remote photography
- Sedentary reminder
- Raise your hand to brighten
- Do not disturb mode
- Device reset
- Remove device
- Basic parameters
- Precautions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Smart wristband
user’s Guide
Wear it properly
The bracelet is best worn after the ulnar styloid
Adjust the size of the wrist according to the adjustment hole; buckle the
wrist strap buckle.
The sensor should be close to the skin to avoid moving
Charge the bracelet
Use it for the first time to ensure that the battery is in normal condition.
If the power is not turned on normally, please connect the charger to charge
the device.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app download and install the app.
https://app.jusonsmart.com/public/superband_download.html
System requirements: Android 5.0 and above; iOS9.0 and above; support for Bluetooth 4.0.
Device connection
- For the first use, you need to connect the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.
- Turn on the Bluetooth switch of the mobile phone system → enter the app device module settings → click “Bind device, experience more features” to enter, it will automatically search for nearby Bluetooth devices on the bracelet, find and connect the bracelet device.
- After the pairing is successful, the APP will pop up a guide page. According to the instructions, jump to the mobile phone system Bluetooth search to find the Well Audio device and connect it. After the connection is successful, you can make / receive calls and listen to music (Note: If the mobile phone system Bluetooth has not been searched Well Audio equipment, please enter the Dual mode menu and set it to On, you cannot make calls without connecting the Well Audio equipment.)
- APP will automatically save the Bluetooth address of the bracelet, and the APP will open and run in the background, and will automatically search and connect the bracelet;
- Android phones use all notification permissions to read contact information and give the app background running in the phone settings.
Bracelet function description
Down button: long press for 2 seconds to switch the machine; short press on
any page to return to the dial; short press on the dial page to turn off the
screen
Up button: Short press on other pages to return step by step
- Slide down the standby page to enter the shortcut interface, slide up to enter the main menu; slide left to enter the side screen page
- Long press on the standby page to set the dial.
- The main menu can switch different styles
- Bracelet reset device This function will clear all data of the bracelet (such as step counting)
Clock interface
After synchronizing with the phone, the bracelet will automatically calibrate
the time;
Swipe left or right on the standby page to cycle through the dials
Step
Number of steps
Wear the bracelet and record the number of daily movement steps to view the
current real-time steps.
distance
The distance of motion is estimated based on the number of walking steps.
Calories
Estimate the calories burned based on the number of walking steps
Heart rate, blood pressure, blood oxygen three in one
After entering the heart rate three-in-one test interface and waiting for a
few seconds, the current heart rate, blood pressure, and blood oxygen test
results will be displayed. This function requires the bracelet to support
heart rate and blood pressure sensors.
dial
Dial pad for making calls (note: the phone also needs to be connected to a
Well Audio device)
phone book
Add 8 commonly used contacts in the APP. After the bracelet is successfully
connected with the APP Bluetooth, the contacts can be displayed in the
bracelet phone book. Click the contact to make a call (Note: The phone needs
to be connected to a Well Audio device)
Music control
The bracelet can control the previous song and the next song, and pause / start playback. (Note: Well Audio devices need to be connected to use this feature phone)
voice assistant
Pull down the standby page to enter the shortcut interface, click on the voice assistant menu to start the language assistant. (Note: The mobile phone needs to be connected to the Well Audio device at the same time, and the smart phone needs to set the user’s voice in advance in the voice menu)
Dual mode switch
This switch needs to be turned on for the phone to search for the Well Audio device. If the phone is not connected to the Well Audio device within 5 minutes after the bracelet is turned on, the switch will be turned off automatically, and it needs to be turned on manually when it is used again.(Note: If the Well Audio function is not used within 5 minutes after connecting to the Well Audio device, it will automatically turn off. The call, play music, phonebook, and voice wake-up functions can be directly activated and used)
exercise more
All sports modes can record the calories and duration of skipping rope.
Custom dial
You need to connect to the APP to get the dial settings, you can choose the recommended dial/photo album custom dial to synchronize to the bracelet
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode; automatically detect the number of deep sleep/light
sleep/waking you throughout the night, and calculate your sleep quality; the
bracelet terminal can view the total duration of deep sleep/light sleep/waking
sleep, APP terminal You can view the details of sleep data.
Note: You need to connect to the app and wear the bracelet to fall asleep
before you can upload your sleep data to the app and start testing at 10pm
Information mode
When the APP is connected, if the push notification reminder is turned on, when the bracelet pushes multiple reminder messages, enter this interface to view the latest message records
Stopwatch function
Enter the stopwatch and click the start button to start timing, click the pause button to stop, and click the reset button to clear the timing.
Weather
Enter this interface to check the weather conditions of the day.
Find mobile phone
When the bracelet is connected to the APP, tap “Find a phone” on the bracelet,
and the phone will emit an alert tone
QR code
The mobile phone scans the QR code to download the APP, and scans the code on
the APP side to automatically bind the bracelet device.
APP function and settings
Personal information
Please set your personal information after entering the app.
Settings → Personal Information, you can set gender – age – height – weight –
distance You can also set your daily goal steps to monitor daily completions.
Application push
Application push:
In the connected state, if this function is turned on, when there are WeChat,
QQ, Facebook and other messages, the bracelet will vibrate to remind and
display the content received by the app (you can also enter the bracelet
information menu to view the latest message records). (The APP needs to be
given the right to obtain system notifications, and the bracelet can display
20-40 words).
Note: Incoming call reminder system is enabled by default, no switch
option (calls for incoming calls need to be connected to Well Audio device)
Other functions:
Turn on the vibration setting function, when there are calls, messages or
other reminders, the bracelet will vibrate. If it is off, the bracelet will
only have a screen reminder without shaking to avoid interruption.
Tips for Android users:
When using the reminder function, you need to set it to allow “FitPro” to run
in the background; it is recommended to add “FitPro” to the rights management
and open all permissions.
Alarm setting
In the connected state, 8 alarms can be set. After setting, it will be synchronized to the bracelet; offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the bracelet will be reminded according to the set time.
Looking for a bracelet
In the connected state, click the “Look for the bracelet” option and the bracelet will vibrate.
Remote photography
In the connected state, start the photo from the wristband or the APP to enter the remote camera interface, shake/turn the wrist/touch the bracelet, and automatically take a photo after 3 seconds of counting down. Please allow the APP to access the photo album to save the self-portrait photo.
Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the reminder interval, if you sit for a long time in the set time, the bracelet will remind you.
Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen, lift your wrist and turn the screen to yourself to light up the screen.
Do not disturb mode
Turn on the Do Not Disturb mode. You can set the Do not disturb time period. During the setting period, the bracelet stops receiving notification messages to avoid reminding messages.
Device reset
Setting this feature reset will erase all data in the bracelet (such as step counting)
Remove device
Remove device This feature will erase data and remove device
Basic parameters
Equipment type | smart wristband | type of battery | Lithium polymer |
---|---|---|---|
Vibration motor | stand by | Synchronously | Bluetooth 4.0 |
Operating temperature | -10°C-50°C | sensor | Low power acceleration |
sensor
System Requirements| 1059 or above / Android5.0 or above
Precautions
- Bathing and swimming should not be worn.
- Please connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the handle ring to moisture for a long time, where the temperature is extremely high or extremely low.
- The flashover of the wristband restarts. Please check the memory information of the mobile phone to clear it and try again, or exit the APP and reopen it.
- If water enters the horn hole during use of the machine, and there is a hoarse sound, you need to throw the water out along the direction of the horn hole.
Component introduction
Host Wrist strap Charging cable Packing box and manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>